ELEGOO Mars 2 & Mars 2 Pro resin settings
From Maker Trainer, the online makerspace
Below you can find a list of resins which are compatible with the ELEGOO Mars 2 & Mars 2 Pro.
These are open material 3D printers, meaning they can print with any brand of resin, not just the ones made by ELEGOO. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them.
You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.
ELEGOO Mars 2 & Mars 2 Pro resin settings spreadsheet
The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.
The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.
| Resin brand | Resin name | Resin color | Resin type | At layer height (μm) | Exp. time (s) | Base layer count | Base exp. time (s) | Light off time (s) | Ref | Confirm |
|---|---|---|---|---|---|---|---|---|---|---|
| 3D Resin Solutions | Fast+ | 50 | 5 | 2.7 | 40 | 1 | [1] | 3D Resin SolutionsFast+ELEGOOMars 2, Mars 2 Pro5052.7401 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 9B7D5D0638289B86910FFED5135B265F | ||
| 3D Resin Solutions | Hard | 50 | 8 | 3 | 40 | 0 | [1] | 3D Resin SolutionsHardELEGOOMars 2, Mars 2 Pro5083400 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 78576B33C31473FD2443AA7E77FED07A | ||
| 3D Resin Solutions | HARD Rapid ABS | 50 | 2.5 | 10 | 35 | 1 | [2] | 3D Resin SolutionsHARD Rapid ABSELEGOOMars 2, Mars 2 Pro502.510351 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 27D92B653CAE9DFD08370B7FD9761883 | ||
| 3D Resin Solutions | Hero | 30 | 6 | 4 | 30 | 0 | [1] | 3D Resin SolutionsHeroELEGOOMars 2, Mars 2 Pro3064300 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id A9DC5E5663298C8FE2D0CEA429F3DCF4 | ||
| 3D Resin Solutions | HERO Evolution | 50 | 4 | 10 | 45 | 1 | [2] | 3D Resin SolutionsHERO EvolutionELEGOOMars 2, Mars 2 Pro50410451 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 8D5DD417CFDFAFF40D31C691C7733CF7 | ||
| 3D Resin Solutions | HERO Tough | 50 | 5 | 10 | 55 | 1 | [2] | 3D Resin SolutionsHERO ToughELEGOOMars 2, Mars 2 Pro50510551 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 1DF646702E524A60B5ABD9316A79D5B9 | ||
| 3D Resin Solutions | Standard | 50 | 5 | 3 | 30 | 0 | [1] | 3D Resin SolutionsStandardELEGOOMars 2, Mars 2 Pro5053300 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 22134E30B37E441D4E15168F704A367B | ||
| 3D Resin Solutions | Standard V2 | 50 | 3.8 | 10 | 40 | 1 | [2] | 3D Resin SolutionsStandard V2ELEGOOMars 2, Mars 2 Pro503.810401 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 11C2ED1C4BD1476470CFA3DF35C081EF | ||
| 3D Resin Solutions | Studio Fabrication | 50 | 3.8 | 10 | 40 | 1 | [2] | 3D Resin SolutionsStudio FabricationELEGOOMars 2, Mars 2 Pro503.810401 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 186FF49327A46BEEC382C894C11E079B | ||
| 3DJake | Color Mix | colorable | 50 | 10 | 10 | 30 | 0 | [3][4] | 3DJakeColor MixELEGOOMars 2, Mars 2 Pro501010300 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 20841041FA0FEF464B38673EEEA1BE9D | |
| 3DMaterials | SuperFast | black, clear, amber | 50 | 0.9 | 5 | [5] | 3DMaterialsSuperFastblack, clear, amberELEGOOMars 2, Mars 2 Pro500.95 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id CFA15ED9E326548AEA78404DE59A6375 | |||
| 3DMaterials | SuperFast | light grey | 50 | 0.8 | 5 | [5] | 3DMaterialsSuperFastlight greyELEGOOMars 2, Mars 2 Pro500.85 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 2A3F37AEF539644C2451DF33F6B78E44 | |||
| 3DMaterials | SuperFast | white | 50 | 1 | 5 | [5] | 3DMaterialsSuperFastwhiteELEGOOMars 2, Mars 2 Pro5015 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id AA1D0BFD6976FB9D9D3F7552D3346215 | |||
| 3DMaterials | SuperFlex | flexible | 50 | 1.3 | 5 | [5] | 3DMaterialsSuperFlexELEGOOMars 2, Mars 2 Pro501.35 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 10159A3A2961B6955A90C6662DB13D4A | |||
| 3DMaterials | SuperHDT | high temp | 50 | 4.5 | 10 | [5] | 3DMaterialsSuperHDTELEGOOMars 2, Mars 2 Pro504.510 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 9043F922603179942A2014661DAFAF66 | |||
| 3DMaterials | SuperPP | 50 | 2 | 5 | [5] | 3DMaterialsSuperPPELEGOOMars 2, Mars 2 Pro5025 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id A6C25AF314C4D45A62753C269D82DE46 | ||||
| Ameralabs | AMD-3 LED | black | 50 | 3.5 | 4 | 60 | 11.5 | [6] | AmeralabsAMD-3 LEDblackELEGOOMars 2, Mars 2 Pro503.546011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id 6606772D95803EC720AEA6978425DF60 | |
| Ameralabs | AMD-3 LED | grey | 50 | 2.8 | 4 | 50 | 11.5 | [6] | AmeralabsAMD-3 LEDgreyELEGOOMars 2, Mars 2 Pro502.845011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id B442CE6A9BFC70DB959CE97A4A285AF5 | |
| Ameralabs | DMD-21 LED | sand | 50 | 3.5 | 4 | 60 | 11.5 | [6] | AmeralabsDMD-21 LEDsandELEGOOMars 2, Mars 2 Pro503.546011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id 9F64F7572916A876E9BF50FEC1556953 | |
| Ameralabs | TGM-7 LED | grey | 50 | 4.4 | 4 | 70 | 11.5 | [6] | AmeralabsTGM-7 LEDgreyELEGOOMars 2, Mars 2 Pro504.447011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id BE3B3F744A26A381316C9C632631A223 | |
| Anycubic | Basic | clear | 50 | 2.5 | 8 | 50 | 0 | [3][4] | AnycubicBasicclearELEGOOMars 2, Mars 2 Pro502.58500 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 4506D77739C0AFECD8F2DEB50ADC7D50 | |
| Anycubic | Plant-Based | translucent green | 50 | 5 | 6 | 55 | 0 | [3][4] | AnycubicPlant-Basedtranslucent greenELEGOOMars 2, Mars 2 Pro5056550 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id A47F1D3BCE6F2EBEE4B81772C63F0E5B | |
| Aurarum | Water Washable | black | water washable | 50 | 7 | 5 | 80 | 7 | [3][4] | AurarumWater WashableblackELEGOOMars 2, Mars 2 Pro5075807 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 065AD6730441A72FE30BB2C6B44DA49D |
| BlueCast | CR3A | castable | 50 | 7 | 60 | 3.5 | 8 | [7] | BlueCastCR3AELEGOOMars 2, Mars 2 Pro507603.58 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id F7AD25BB54F59C1E8F497C9E97B9120E | |
| BlueCast | Dental | grey, beige | castable, dental | 50 | 7 | 50 | 3.9 | 8 | [7] | BlueCastDentalgrey, beigeELEGOOMars 2, Mars 2 Pro507503.98 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id F8ABA852CFE10AEB0F5AA7F746EDA32B |
| BlueCast | Model HR | 50 | 7 | 50 | 4.6 | 8 | [7] | BlueCastModel HRELEGOOMars 2, Mars 2 Pro507504.68 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 16E6BF561621A69580D99A499A4C1CFF | ||
| BlueCast | Original | castable | 50 | 7 | 60 | 4.8 | 8 | [7] | BlueCastOriginalELEGOOMars 2, Mars 2 Pro507604.88 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id F0E3CFDEA92CB80F519E1DB8F8C82334 | |
| BlueCast | X-ONE | castable | 50 | 15 | 18 | 6.5 | 8 | [7] | BlueCastX-ONEELEGOOMars 2, Mars 2 Pro5015186.58 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 6EAE355C10FF72903C9095B09AC8C380 | |
| BlueCast | X10 | castable | 50 | 7 | 60 | 3.5 | 8 | [7] | BlueCastX10ELEGOOMars 2, Mars 2 Pro507603.58 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 0D64B29E7641D1EE2359788D561FA20A | |
| BlueCast | X5 | castable | 50 | 7 | 60 | 3.8 | 8 | [7] | BlueCastX5ELEGOOMars 2, Mars 2 Pro507603.88 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 4FDD4E887A99FDE07A7D266066D5746D | |
| DruckWege | Type D | 100 | 2.5 | 50 | [8] | DruckWegeType DELEGOOMars 2, Mars 2 Pro1002.550 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id 41C1A3FEC0950C32A56129BE13C56DA3 | ||||
| DruckWege | Type D Dental Plus | dental | 100 | 2.5 | 50 | [8] | DruckWegeType D Dental PlusELEGOOMars 2, Mars 2 Pro1002.550 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id 85A3455DDCBC40ECFC91F1C53C987AA2 | |||
| DruckWege | Type D Flex | flexible | 100 | 3 | 50 | [8] | DruckWegeType D FlexELEGOOMars 2, Mars 2 Pro100350 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id 076E70E7507B3B28745BD120E3FAAEAE | |||
| DruckWege | Type D High Temp | high temp | 100 | 2.5 | 50 | [8] | DruckWegeType D High TempELEGOOMars 2, Mars 2 Pro1002.550 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id F49DB51569C740A12EBF84AC126CEB18 | |||
| DruckWege | Type D Pigment Free | 100 | 2.5 | 50 | [8] | DruckWegeType D Pigment FreeELEGOOMars 2, Mars 2 Pro1002.550 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id 724989003BE1ED262E9C8BB32412244C | ||||
| DruckWege | Type D Pro | 100 | 2.5 | 50 | [8] | DruckWegeType D ProELEGOOMars 2, Mars 2 Pro1002.550 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id 8BD7DB53228F7C5590A914DA81C61B1D | ||||
| DruckWege | Type D Tough | 100 | 2.5 | 25 | [8] | DruckWegeType D ToughELEGOOMars 2, Mars 2 Pro1002.525 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id 6D9D9D9C5D1BEE56ED1492B69F8DB1B9 | ||||
| ELEGOO | ABS-Like | black | 50 | 3 | 35 | [9][4] | ELEGOOABS-LikeblackELEGOOMars 2, Mars 2 Pro50335 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 7E2F6A246F2B88C409A458A89F29A4D0 | |||
| ELEGOO | ABS-Like | grey, white, red, green, blue, yellow, beige, mint green, smoky black | 50 | 2.5 | 35 | [9][4] | ELEGOOABS-Likegrey, white, red, green, blue, yellow, beige, mint green, smoky blackELEGOOMars 2, Mars 2 Pro502.535 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 787593130F6A8D48E309D8A622B59969 | |||
| ELEGOO | ABS-Like | maroon | 50 | 3 | 45 | [9][4] | ELEGOOABS-LikemaroonELEGOOMars 2, Mars 2 Pro50345 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 84953E50C022C054B8B569F7AF78C4F4 | |||
| ELEGOO | ABS-Like | translucent | 50 | 6 | 40 | [9][4] | ELEGOOABS-LiketranslucentELEGOOMars 2, Mars 2 Pro50640 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id CB1B08719E00889946C50E690A650F70 | |||
| ELEGOO | Plant-Based | black | 50 | 3 | 45 | [9][4] | ELEGOOPlant-BasedblackELEGOOMars 2, Mars 2 Pro50345 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id F602CF4F0726691234097F9213CEAE7E | |||
| ELEGOO | Plant-Based | grey, white, green | 50 | 2.5 | 35 | [9][4] | ELEGOOPlant-Basedgrey, white, greenELEGOOMars 2, Mars 2 Pro502.535 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 8B2309287963EDD6BBD8E2B7A0FB1D51 | |||
| ELEGOO | Plant-Based | translucent | 50 | 3 | 40 | [9][4] | ELEGOOPlant-BasedtranslucentELEGOOMars 2, Mars 2 Pro50340 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 734CB7421E3FC6BCAD76DED7CD74A322 | |||
| ELEGOO | Standard | black, maroon | 50 | 3 | 45 | [9][4] | ELEGOOStandardblack, maroonELEGOOMars 2, Mars 2 Pro50345 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id EC28223FDC0B1C84558BC404D5A587E8 | |||
| ELEGOO | Standard | grey, white, red, green, clear blue, blue, yellow, beige | 50 | 2.5 | 35 | [9][4] | ELEGOOStandardgrey, white, red, green, clear blue, blue, yellow, beigeELEGOOMars 2, Mars 2 Pro502.535 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id C2A88EEC2DF2F6630F84C520CA6CEFBD | |||
| ELEGOO | Standard | translucent | 50 | 6 | 40 | [9][4] | ELEGOOStandardtranslucentELEGOOMars 2, Mars 2 Pro50640 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 1A675ED16F359E050C52E3B3222917D0 | |||
| ELEGOO | Water Washable | black | water washable | 50 | 3 | 35 | [9][4] | ELEGOOWater WashableblackELEGOOMars 2, Mars 2 Pro50335 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id C86CDEAE6575163A2C47BDD2857A6FBB | ||
| ELEGOO | Water Washable | ceramic grey, white, red, green, clear blue, yellow, beige, mint green, smoky black | water washable | 50 | 2.5 | 35 | [9][4] | ELEGOOWater Washableceramic grey, white, red, green, clear blue, yellow, beige, mint green, smoky blackELEGOOMars 2, Mars 2 Pro502.535 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id CBBFF3AA82056D0C6367DEFAA2A4A891 | ||
| eSUN | eResin-PLA Pro | 50 | 3.5 | 5 | 40 | [10] | eSUNeResin-PLA ProELEGOOMars 2, Mars 2 Pro503.5540 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:01, 7 March 2022. poll-id 7FDA1972D2B85A8CF06390A00867CE6A | |||
| FormFutura | Castable Wax | castable | 50 | 2 | 4 | 120 | 5 | [11] | FormFuturaCastable WaxELEGOOMars 2, Mars 2 Pro50241205 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id 898DF81746A936EB18B1D5B9D7F1D7EA | |
| FormFutura | Color Mix Water Washable | colorable, water washable | 50 | 4.5 | 4 | 45 | 0.5 | [11] | FormFuturaColor Mix Water WashableELEGOOMars 2, Mars 2 Pro504.54450.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id 69C7F243FD05B95C8C66FB0CF547A210 | |
| FormFutura | SLA Tough | 8 | 4 | 6 | 75 | 1 | [11] | FormFuturaSLA ToughELEGOOMars 2, Mars 2 Pro846751 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id B3F4C74A7E4C0BE5CAD5C4911A354775 | ||
| Inland | Standard | grass green | 50 | 3.5 | 4 | 20 | 7 | [3][4] | InlandStandardgrass greenELEGOOMars 2, Mars 2 Pro503.54207 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id BD776508599439DEDABFBD0180AD4B27 | |
| JAMG HE | Conjure Rigid | 50 | 4.5 | 5 | 25 | [12][13] | JAMG HEConjure RigidELEGOOMars 2, Mars 2 Pro504.5525 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:39, 7 March 2022. poll-id BCCBFC61F214EBA5C09B7FFB9C5F8800 | |||
| JAMG HE | Conjure Sculpt | 50 | 4.5 | 5 | 25 | [12][13] | JAMG HEConjure SculptELEGOOMars 2, Mars 2 Pro504.5525 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:39, 7 March 2022. poll-id 0BD6F7AB3C05299EC78FD0311B4E202B | |||
| JAMG HE | Conjure Tough | 50 | 4.5 | 5 | 25 | [12][13] | JAMG HEConjure ToughELEGOOMars 2, Mars 2 Pro504.5525 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:39, 7 March 2022. poll-id 9DC4C7869C1E423D9C517D82AD8F497A | |||
| Liqcreate | Clear Impact | clear | 50 | 9 | 5 | 70 | 2 | [14] | LiqcreateClear ImpactclearELEGOOMars 2, Mars 2 Pro5095702 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 6F08621DAD4A8884137DEE023EB12C54 | |
| Liqcreate | Composite-X | 50 | 7.5 | 5 | 60 | 1 | [14] | LiqcreateComposite-XELEGOOMars 2, Mars 2 Pro507.55601 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 18828ED773F4F2FA84FA3E4208E49EF0 | ||
| Liqcreate | Deep Blue | blue | 100 | 9.5 | 2 | 80 | 1 | [14] | LiqcreateDeep BlueblueELEGOOMars 2, Mars 2 Pro1009.52801 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 1DAB355DCAD76E2ADFFA72B40B7BCB9C | |
| Liqcreate | Dental Model Pro | beige | dental | 50 | 4 | 2 | 70 | 2 | [14] | LiqcreateDental Model ProbeigeELEGOOMars 2, Mars 2 Pro5042702 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 1D01F2C42BEEBDE1F6F1ED9E1A585F43 |
| Liqcreate | Dental Model Pro | grey | dental | 50 | 5 | 2 | 70 | 2 | [14] | LiqcreateDental Model ProgreyELEGOOMars 2, Mars 2 Pro5052702 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id AB8891ACFB5BBB4E1910FCAADAC77DDF |
| Liqcreate | Flexible-X | flexible | 50 | 15 | 2 | 60 | 1 | [14] | LiqcreateFlexible-XELEGOOMars 2, Mars 2 Pro50152601 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 97A438C3DC858C4F246C7507E72BA895 | |
| Liqcreate | Gingiva Mask | dental | 100 | 14 | 5 | 50 | 2 | [14] | LiqcreateGingiva MaskELEGOOMars 2, Mars 2 Pro100145502 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 7574A584CFD3D751CD7C415876BDEFAC | |
| Liqcreate | Hazard Glow | glow in the dark | 100 | 8 | 5 | 70 | 1 | [14] | LiqcreateHazard GlowELEGOOMars 2, Mars 2 Pro10085701 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 051D5A3D53286BF1B157AF1F781A8BFC | |
| Liqcreate | Premium Black | black | 50 | 3.2 | 8 | 30 | 1 | [14] | LiqcreatePremium BlackblackELEGOOMars 2, Mars 2 Pro503.28301 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id A00BC5319D33901CEB12583A0D325CDF | |
| Liqcreate | Premium Flex | flexible | 50 | 5 | 5 | 60 | 2 | [14] | LiqcreatePremium FlexELEGOOMars 2, Mars 2 Pro5055602 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id F283C7319A73EFEE04D9C42695C9A0A6 | |
| Liqcreate | Premium Model | 50 | 2.9 | 2 | 50 | 2 | [14] | LiqcreatePremium ModelELEGOOMars 2, Mars 2 Pro502.92502 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id F944EDA31AB0705DE46FEF666C402B5A | ||
| Liqcreate | Premium Tough | 100 | 5.5 | 5 | 80 | 2 | [14] | LiqcreatePremium ToughELEGOOMars 2, Mars 2 Pro1005.55802 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 0430CB5329C2B9ED5D08B0820B85BCC1 | ||
| Liqcreate | Premium White | white | 50 | 1.5 | 2 | 40 | 1 | [14] | LiqcreatePremium WhitewhiteELEGOOMars 2, Mars 2 Pro501.52401 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 5823A8BEA32907BF5A2B4F03C2032305 | |
| Liqcreate | Stone Coal Black | black | 50 | 6 | 5 | 60 | 1 | [14] | LiqcreateStone Coal BlackblackELEGOOMars 2, Mars 2 Pro5065601 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 5F1D572B09A6B294FB52F9FBE7AF2ECD | |
| Liqcreate | Strong-X | 50 | 5.8 | 5 | 50 | 1 | [14] | LiqcreateStrong-XELEGOOMars 2, Mars 2 Pro505.85501 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 4393927E5C981936920A3E99F5137DDD | ||
| Liqcreate | Tough-X | 50 | 14 | 2 | 60 | 1 | [14] | LiqcreateTough-XELEGOOMars 2, Mars 2 Pro50142601 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 8DACC80D1DCD37CD0B5458EB25880514 | ||
| Liqcreate | Wax Castable | castable | 50 | 2.6 | 2 | 120 | 4 | [14] | LiqcreateWax CastableELEGOOMars 2, Mars 2 Pro502.621204 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id AA5B55F512481F4CEB5CC727A19CB654 | |
| Monocure | Rapid | white | 50 | 8 | 5 | 50 | 0 | [3][4] | MonocureRapidwhiteELEGOOMars 2, Mars 2 Pro5085500 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 8DC17F884F33AF215B1F940E5E00B46F | |
| Nova3D | Washable | grey | water washable | 50 | 1.8 | 5 | 6 | 7 | [3][4] | Nova3DWashablegreyELEGOOMars 2, Mars 2 Pro501.8567 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:51, 8 March 2022. poll-id 5E264A0F0FFCA8D592532728F74A870D |
| Resione | C01 | 50 | 3.3 | 3 | 45 | 7 | [15] | ResioneC01ELEGOOMars 2, Mars 2 Pro503.33457 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id B59F6384C44B84B9B48BAFD50C870CA1 | ||
| Resione | D01 | 50 | 2.8 | 3 | 40 | 7 | [15] | ResioneD01ELEGOOMars 2, Mars 2 Pro502.83407 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id B3A6B9A605EBE3FA285E7E8E01918D3D | ||
| Resione | D01S | 50 | 3 | 3 | 40 | 7 | [15] | ResioneD01SELEGOOMars 2, Mars 2 Pro5033407 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 680E2D4A7A69A4D5F4597C375CB7FC75 | ||
| Resione | F39-F39T | 100 | 2.2 | 3 | 30 | 9 | [15] | ResioneF39-F39TELEGOOMars 2, Mars 2 Pro1002.23309 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 17ABDE08362D7FDC867188E987E6A78A | ||
| Resione | F69-F80 Black | 50 | 2.6 | 3 | 35 | 9 | [15] | ResioneF69-F80 BlackELEGOOMars 2, Mars 2 Pro502.63359 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id C4A48E3F2E9BDC48652B4BD32B05574E | ||
| Resione | F80 Gum | 50 | 2.2 | 3 | 30 | 9 | [15] | ResioneF80 GumELEGOOMars 2, Mars 2 Pro502.23309 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 59CEEAABD3AC6859A6EA466D5C56DB73 | ||
| Resione | G217-HT100 | 50 | 3 | 3 | 35 | 10 | [15] | ResioneG217-HT100ELEGOOMars 2, Mars 2 Pro50333510 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 631AE99DBAE1C5B767E99FC6C2F65EC8 | ||
| Resione | K | 50 | 2.2 | 3 | 35 | 7 | [15] | ResioneKELEGOOMars 2, Mars 2 Pro502.23357 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 3D3097686EE8BE0B0535A8576823AB67 | ||
| Resione | M58 | 50 | 1.9 | 3 | 30 | 7 | [15] | ResioneM58ELEGOOMars 2, Mars 2 Pro501.93307 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 92C97CD224A27BCEF38A9A2889A0051F | ||
| Resione | M68-EC51 | 50 | 1.8 | 3 | 30 | 7 | [15] | ResioneM68-EC51ELEGOOMars 2, Mars 2 Pro501.83307 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id D3EDCA34F004EDF70A2A69BF2E4C7C16 | ||
| Resione | M70 | 50 | 2.6 | 3 | 60 | 9 | [15] | ResioneM70ELEGOOMars 2, Mars 2 Pro502.63609 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 39B8B9FBA0A8CFCCD7063B20E62A068F | ||
| Resione | MS100 | 50 | 2.4 | 3 | 30 | 7 | [15] | ResioneMS100ELEGOOMars 2, Mars 2 Pro502.43307 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 5E1BA1C886688E5F86E452B7B025A54B | ||
| Resione | PB81 | 50 | 2.4 | 3 | 30 | 7 | [15] | ResionePB81ELEGOOMars 2, Mars 2 Pro502.43307 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 614E0A62B9C65639CC6158CAFFBDDB34 | ||
| Resione | W90B | clear, white, blue | 50 | 1.6 | 3 | 30 | 7 | [15] | ResioneW90Bclear, white, blueELEGOOMars 2, Mars 2 Pro501.63307 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id CF757EEBC65F5E30FA6A6EAEDC82CC37 | |
| Resione | W90B | orange, grey, black | 50 | 1.7 | 3 | 35 | 7 | [15] | ResioneW90Borange, grey, blackELEGOOMars 2, Mars 2 Pro501.73357 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 5FC5236BE388BD52C766F1218190F347 | |
| Siraya Tech | Cast | castable | 50 | 3.5 | 5 | 35 | [16] | Siraya TechCastELEGOOMars 2, Mars 2 Pro503.5535 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id A07A08579BAE56600DB4CA105A6A3080 | ||
| Siraya Tech | Craft | glow in the dark | 50 | 2 | 5 | 25 | [16] | Siraya TechCraftELEGOOMars 2, Mars 2 Pro502525 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 4E27F2298BF88CE76CEFBDB3282E761C | ||
| Siraya Tech | Fast | navy grey | 50 | 2.5 | 5 | 35 | [16] | Siraya TechFastnavy greyELEGOOMars 2, Mars 2 Pro502.5535 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 92EA5E97B345D18B7A9B0B1FC3D41427 | ||
| Siraya Tech | Fast | 50 | 2 | 5 | 30 | [16] | Siraya TechFastELEGOOMars 2, Mars 2 Pro502530 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 1F32E6ADD9A7CBF82607D2C7291DD6CE | |||
| Siraya Tech | Sculpt | ultra white | high temp | 50 | 2.25 | 5 | 30 | [16] | Siraya TechSculptultra whiteELEGOOMars 2, Mars 2 Pro502.25530 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id D8484B26C3281F509F807F916D3E71FE | |
| Uniz | zMud | grey | 50 | 3.5 | 5 | 35 | 2 | UnizzMudgreyELEGOOMars 2, Mars 2 Pro503.55352 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:36, 15 May 2022. poll-id 674FA33978DD6B610403ADC38B267CF6 | ||
| Phrozen | Water-Washable | grey | water washable | 50 | 2.5 | 5 | 25 | [17] | PhrozenWater-WashablegreyELEGOOMars 2, Mars 2 Pro502.5525 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 23 May 2022. poll-id 575E2484FFFB86288333FB1A08640E9A | |
| Siraya Tech | Build | smoky black | 50 | 2.6 | 5 | 25 | [18] | Siraya TechBuildsmoky blackELEGOOMars 2, Mars 2 Pro502.6525 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:09, 3 June 2022. poll-id 8C82D0F97269131426496430A2F316DD |
How to use the spreadsheet (Step-by-step)
1. Find the resin you'd like to use
You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes.
If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.
2. Check the source
The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations.
3. Copy the parameters into your slicer
The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.)
Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model.
4. Print a test file for validation
This is a crucial step, and one you shouldn't skip. Every printer is slightly different, and the settings that work on one unit might not work the same on another.
As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.
You should always start out with a small test file to check if the settings work before launching a larger print.
5. Inspect the test file
If the print looks good, you can go ahead and use the settings as they are.
If you see any imperfections, (such as lack of detail, brittleness, discoloration etc.) adjust the settings according to the resin validation guide.
6. Help out others
If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.)
If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters.
You can help even more by adding other compatible resins with the Add new settings button.
Other important factors
There are some factors that greatly influence your printing success no matter what material you choose.
1. Maintain adequate temperature
You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.
2. Shake your resin
Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.
You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.
3. Check your expiration date
Keep away from direct sunlight. Store in a cool, dry place. Do not exceed expiration date. Use soon after opening.
What's true for most of your food cupboard is true for resins as well.
While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.
Resin settings explained
If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.
These 3D printers by ELEGOO use an open material system. This means they can use any brand of resin, not just the ones sold by ELEGOO.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems.
For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
- Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly.
- μm: 1 micron or 0.001 milimeters.
- Normal exposure time: The amount of time each normal layer will be cured for.
- Number of base layers: At the start of the print, you must cure a few layers for a longer time. This helps the model stick to the build plate.
- Base layer exposure time: The amount of time each base layer will be cured for.
- Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.
Community tips
If you have a tip related to ELEGOO Mars 2 & Mars 2 Pro resin settings, tell others about it below.
- ↑ 1.0 1.1 1.2 1.3 "#3DRS Resin Settings & Support". 3D Resin Solutions.
- ↑ 2.0 2.1 2.2 2.3 2.4 "Exposure Settings". 3D Resin Solutions.
- ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 "Community Resin Settings (ELEGOO)". Google Sheets.
- ↑ 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 "ELEGOO Printers Resin Setting Sheet". ELEGOO.com.
- ↑ 5.0 5.1 5.2 5.3 5.4 5.5 "3D Printing Resins for LCD, DLP". 3DMaterials.
- ↑ 6.0 6.1 6.2 6.3 "3D Printing Settings". AmeraLabs.
- ↑ 7.0 7.1 7.2 7.3 7.4 7.5 7.6 "Download". BlueCast.
- ↑ 8.0 8.1 8.2 8.3 8.4 8.5 8.6 "Exposure times of DruckWege Type D UV Resins on the Elegoo Mars 2 Pro". DruckWege.
- ↑ 9.00 9.01 9.02 9.03 9.04 9.05 9.06 9.07 9.08 9.09 9.10 9.11 "ELEGOO resin settings on mars & mars pro & Mars 2 & Mars 3 and saturn(official)". Google Sheets.
- ↑ "3D Printing Settings". eSUN 3D Printing Materials.
- ↑ 11.0 11.1 11.2 "3D Printer resin". FormFutura.
- ↑ 12.0 12.1 12.2 "Conjure resin profile 20210912". Google Sheets.
- ↑ 13.0 13.1 13.2 "JAMG HE Conjure Rigid Resin". ChiTu Systems!.
- ↑ 14.00 14.01 14.02 14.03 14.04 14.05 14.06 14.07 14.08 14.09 14.10 14.11 14.12 14.13 14.14 14.15 14.16 "Compatible 3D-printers with Liqcreate resins". Liqcreate.
- ↑ 15.00 15.01 15.02 15.03 15.04 15.05 15.06 15.07 15.08 15.09 15.10 15.11 15.12 15.13 15.14 "Settings". RESIONE.
- ↑ 16.0 16.1 16.2 16.3 16.4 "support". Siraya Tech.
- ↑ "BLKFSH". Maker Trainer.
- ↑ "Hanage". Maker Trainer.
Enable comment auto-refresher
Anonymous user #1
Permalink |