Prusa SL1 resin settings
From Maker Trainer, the online makerspace
Below you can find a list of resins which are compatible with the Prusa SL1.
The SL1 is an open material 3D printer, meaning it can print with any brand of resin, not just the ones made by Prusa. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them.
You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.
Prusa SL1 resin settings spreadsheet
The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.
The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.
| Resin brand | Resin name | Resin color | Resin type | At layer height (μm) | Exp. time (s) | Base layer count | Base exp. time (s) | Light off time (s) | Ref | Confirm |
|---|---|---|---|---|---|---|---|---|---|---|
| 3DMaterials | ABS | 50 | 13 | 25 | [1] | 3DMaterialsABSPrusaSL1501325 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 94A494C2B05CBCD304A9C77800474917 | ||||
| 3DMaterials | Dent | dental | 50 | 7 | 45 | [1] | 3DMaterialsDentPrusaSL150745 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id A2DBAE60D6A6C2E3ABE011C51DDF9FC4 | |||
| 3DMaterials | HR | green | 50 | 15 | 40 | [1] | 3DMaterialsHRgreenPrusaSL1501540 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id EE5581FF70882D0E7385AE0064C3504F | |||
| 3DMaterials | HR | red wine | 50 | 9 | 35 | [1] | 3DMaterialsHRred winePrusaSL150935 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id DE7D1E988BE7809522773D9708D8554D | |||
| 3DMaterials | HTR140 | high temp | 50 | 12 | 45 | [1] | 3DMaterialsHTR140PrusaSL1501245 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 796FBA008647E2C92556471394BAFDCB | |||
| 3DMaterials | SuperFast | clear | 50 | 3.5 | 30 | [2] | 3DMaterialsSuperFastclearPrusaSL1503.530 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 5E331C48E74ED409384C9EAFE47F54F8 | |||
| 3DMaterials | Vulcan Gold | 50 | 15 | 30 | [1] | 3DMaterialsVulcan GoldPrusaSL1501530 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id AFA087A8BF861536867E324C2533A4B7 | ||||
| 3DMaterials | XPRO | white | 50 | 9 | 35 | [1] | 3DMaterialsXPROwhitePrusaSL150935 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 1BB4F5D6D50376F27090AF0AE89A8140 | |||
| 3DMaterials | XPRO | 50 | 8 | 10 | [3][4] | 3DMaterialsXPROPrusaSL150810 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id FD576ADE3ACFAEDB5E8951C6BD509B5E | ||||
| 3DMaterials | black | 50 | 20 | 40 | [1] | 3DMaterialsblackPrusaSL1502040 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 0869E7EB874E6A3DC0B57DCD9A238F3F | ||||
| Ameralabs | AMD-3 LED | black | 50 | 5 | 4 | 80 | 1 | [5] | AmeralabsAMD-3 LEDblackPrusaSL15054801 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id 93C2210959A21D953F10019670BF6531 | |
| Ameralabs | AMD-3 LED | grey | 50 | 6.3 | 4 | 100 | 1 | [5] | AmeralabsAMD-3 LEDgreyPrusaSL1506.341001 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id EF98B5C3A1918457D09C632AB7EABDE4 | |
| Ameralabs | AMD-3 LED | 50 | 5 | 30 | [1] | AmeralabsAMD-3 LEDPrusaSL150530 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id AC76CB3B18F3C38E54B07E5891E16457 | ||||
| Ameralabs | DMD-21 LED | sand | dental | 50 | 6.3 | 4 | 100 | 1 | [5] | AmeralabsDMD-21 LEDsandPrusaSL1506.341001 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id 00C6590D56D70148E064177173DD0DA7 |
| Ameralabs | TGM-7 LED | grey | 50 | 8.3 | 4 | 130 | 1 | [5] | AmeralabsTGM-7 LEDgreyPrusaSL1508.341301 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id 0F6A4616DDA1CB12CD52A1A743D058A4 | |
| Ameralabs | grey | 50 | 4.5 | 10 | 35 | [3][4] | AmeralabsgreyPrusaSL1504.51035 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id 05795931C2E60C4A88929FFFEA635B1A | |||
| Anycubic | Basic | grey | 50 | 8.5 | 10 | 30 | [3][4] | AnycubicBasicgreyPrusaSL1508.51030 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 83430C5FA8D15DE6D72E0ADE5EFACCFC | ||
| Anycubic | Basic | translucent green | 50 | 6 | 10 | 35 | [3][4] | AnycubicBasictranslucent greenPrusaSL15061035 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 42A241BDD70F9E29BE4C7026554427CC | ||
| Anycubic | Basic | white | 50 | 8 | 10 | 35 | [3][4] | AnycubicBasicwhitePrusaSL15081035 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id DA4F8576BF647BD29FA69D7D8B77798F | ||
| Anycubic | Plant-Based | black, green | 50 | 8 | 10 | 35 | [3][4] | AnycubicPlant-Basedblack, greenPrusaSL15081035 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id B6A37F77BC0F9F4706BED9A586C45359 | ||
| Asiga | DentaModel | dental | 50 | 15 | 30 | [1] | AsigaDentaModelPrusaSL1501530 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 7013B9D8115F3D229A0927E54A8CE7A4 | |||
| BlueCast | 23LS | castable | 50 | 8 | 50 | [1] | BlueCast23LSPrusaSL150850 You must log in to vote 1 0 There was one vote since the poll was created on 12:39, 7 March 2022. poll-id BEF9C3186F037A93F3D134E99F933569 | |||
| BlueCast | EcoGray | castable | 50 | 7 | 35 | [1] | BlueCastEcoGrayPrusaSL150735 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 236A1785B6295EDABF10F4A5AD317C4C | |||
| BlueCast | LCD-DLP Original | castable | 50 | 10 | 60 | [1] | BlueCastLCD-DLP OriginalPrusaSL1501060 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id FF061E498C35F0DA21473641B5C8227B | |||
| BlueCast | Phrozen Wax | castable | 50 | 16 | 50 | [1] | BlueCastPhrozen WaxPrusaSL1501650 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 2E5C1591BA113EA808818069918C6DAB | |||
| BlueCast | S+ | castable | 50 | 9 | 45 | [1] | BlueCastS+PrusaSL150945 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 270D2CE00A9DBE846882385B783F1BCA | |||
| BlueCast | X10 | castable | 50 | 6 | 100 | [1] | BlueCastX10PrusaSL1506100 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 16949C8EAB41AC888F7C1B930A7A5A65 | |||
| BlueCast | X5 | castable | 50 | 9 | 100 | [1] | BlueCastX5PrusaSL1509100 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id F25BDE211AA9A0444B7094D0EA801F73 | |||
| BlueCast | castable, dental | 50 | 7 | 50 | [1] | BlueCastPrusaSL150750 You must log in to vote 1 0 There was one vote since the poll was created on 12:39, 7 March 2022. poll-id CDF8A54C1313FB54CF698194969F4842 | ||||
| DruckWege | Type D | clear | 50 | 7.5 | 10 | 85 | [3][4] | DruckWegeType DclearPrusaSL1507.51085 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id 5D3E6B2F749CF2F356FFA63229ECDEF8 | ||
| DruckWege | Type D Dental | dental | 50 | 11 | 10 | 150 | [3][4] | DruckWegeType D DentalPrusaSL1501110150 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id 05D55C310B97C01D0B24316F05A6ED7C | ||
| DruckWege | Type D High Temp | high temp | 50 | 10 | 10 | 90 | [3][4] | DruckWegeType D High TempPrusaSL150101090 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id 772EE2D2A6D0B2630BD63FFCC5784014 | ||
| DruckWege | Type D Pro | black | 50 | 11 | 10 | 45 | [3][4] | DruckWegeType D ProblackPrusaSL150111045 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id F790E3029FF387E6E67B97195712F47B | ||
| DruckWege | Type D Tough | 50 | 4 | 10 | 35 | [3][4] | DruckWegeType D ToughPrusaSL15041035 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id 3AAAD63814E477E834599F33E747296B | |||
| ELEGOO | ABS-Like | translucent | 50 | 7.5 | 10 | 35 | [3][4] | ELEGOOABS-LiketranslucentPrusaSL1507.51035 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 7D13DC0621933E78FE76FBAB60E3BD81 | ||
| ELEGOO | ABS-Like | white, blue | 50 | 8 | 10 | 35 | [3][4] | ELEGOOABS-Likewhite, bluePrusaSL15081035 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 32CCCE579DAC839932AF56CD628C4BEA | ||
| ELEGOO | Standard | black, white | 50 | 5.5 | 10 | 35 | [3][4] | ELEGOOStandardblack, whitePrusaSL1505.51035 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 68DF22682B57A646CAF751C4AE70804A | ||
| ELEGOO | Standard | green, skin | 50 | 7 | 10 | 35 | [3][4] | ELEGOOStandardgreen, skinPrusaSL15071035 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id FB30604131342071D2830EB4B469AC4F | ||
| eSUN | eResin-PLA | white | 50 | 8 | 30 | [1] | eSUNeResin-PLAwhitePrusaSL150830 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:01, 7 March 2022. poll-id D93B8EDD42325747BCFE8884E260087D | |||
| eSUN | Hard-Tough | blue | 50 | 19 | 10 | 35 | [3][4] | eSUNHard-ToughbluePrusaSL150191035 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:01, 7 March 2022. poll-id A574E65DC454DD5BAACF16E3DFE48D72 | ||
| eSUN | Standard | black | 50 | 7 | 30 | [1] | eSUNStandardblackPrusaSL150730 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:01, 7 March 2022. poll-id E6173B342A10DB5E96A5F24DD2B1C316 | |||
| FormFutura | translucent blue | 50 | 23 | 10 | 40 | [3][4] | FormFuturatranslucent bluePrusaSL150231040 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id 1644ED0616771491D4C7987EF8974F79 | |||
| Formlabs | Tough 1500 | 14 | 10 | 35 | [3][4] | FormlabsTough 1500PrusaSL1141035 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 112FA4280CF695E86F97363BD5E502ED | ||||
| Fun To Do | NxtGen | ash grey | 50 | 9 | 40 | [1] | Fun To DoNxtGenash greyPrusaSL150940 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:08, 7 March 2022. poll-id 85AB6A0D54EB3E33B2CED1177D735E16 | |||
| HARZ Labs | Black | 50 | 8 | 10 | 35 | [3][4] | HARZ LabsBlackPrusaSL15081035 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:07, 7 March 2022. poll-id CC72FB526604016D5F07AE83D36CE42F | |||
| HARZ Labs | Model | cherry | 50 | 8 | 45 | [1] | HARZ LabsModelcherryPrusaSL150845 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:07, 7 March 2022. poll-id 096FCA3448289FFDEE2DEAF3CE3C3020 | |||
| Liqcreate | Composite-X | 50 | 14 | 10 | 45 | [6] | LiqcreateComposite-XPrusaSL150141045 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 5A1B3CA17F81A0120DE4AA9850B0F6D3 | |||
| Liqcreate | Deep Blue | blue | 50 | 23 | 10 | 100 | [6] | LiqcreateDeep BluebluePrusaSL1502310100 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 45EBCC88DDFE7B1868AE92F14FEB9AD1 | ||
| Liqcreate | Premium Black | black | 50 | 13 | 10 | 100 | [6] | LiqcreatePremium BlackblackPrusaSL1501310100 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 1ACBBD72742FF78AAF57E626F9150D7D | ||
| Liqcreate | Premium Flex | flexible | 50 | 15 | 6 | 60 | [6] | LiqcreatePremium FlexPrusaSL15015660 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 89B36720E9EBF7868922C10AFA1A1D02 | ||
| Liqcreate | Premium Model | 50 | 13 | 10 | 100 | [6] | LiqcreatePremium ModelPrusaSL1501310100 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 9DA786EB271BC0F2E49B2F295D34D722 | |||
| Liqcreate | Premium Tough | 50 | 15 | 6 | 60 | [6] | LiqcreatePremium ToughPrusaSL15015660 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 401A1889FBBD14C1886364DE3E50C47C | |||
| Liqcreate | Premium White | white | 50 | 13 | 10 | 100 | [6] | LiqcreatePremium WhitewhitePrusaSL1501310100 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id D7A01451D4514378908D3A6F645961A0 | ||
| Liqcreate | Wax Castable | castable | 50 | 8.5 | 3 | 40 | [6] | LiqcreateWax CastablePrusaSL1508.5340 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 31A28E4AAB9A58A282A404587003A526 | ||
| Monocure | Flex100 Rapid | flexible | 50 | 8 | 4 | 40 | [7] | MonocureFlex100 RapidPrusaSL1508440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 31DF92DE86A08824D534D54A3B4C6097 | ||
| Monocure | Model Rapid | 50 | 6 | 4 | 40 | [7] | MonocureModel RapidPrusaSL1506440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id EE64332AEC34498E066A7CA8160BCF68 | |||
| Monocure | Porcelene Dental (R) | dental | 50 | 6 | 4 | 40 | [7] | MonocurePorcelene Dental (R)PrusaSL1506440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 95EB3CFC867EF690CEB00F7D6E85FBF3 | ||
| Monocure | Pro Crystal Clear | clear | 50 | 6.5 | 4 | 40 | [7] | MonocurePro Crystal ClearclearPrusaSL1506.5440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 2879BF6A0EB0D627A542B978D05AEC7C | ||
| Monocure | Pro Deep Black | black | 50 | 6 | 4 | 40 | [7] | MonocurePro Deep BlackblackPrusaSL1506440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 796EFF6D84356EA209BFF006D0A8E330 | ||
| Monocure | Pro Glow In The Dark | glow in the dark | 50 | 6.5 | 4 | 40 | [7] | MonocurePro Glow In The DarkPrusaSL1506.5440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 7172C2D8E074DC33D28D06854D177A97 | ||
| Monocure | Rapid | black | 50 | 6 | 40 | [1] | MonocureRapidblackPrusaSL150640 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 0EA05E913D51454F9A73491A90D98205 | |||
| Monocure | Rapid | blue, white | 50 | 7 | 40 | [1] | MonocureRapidblue, whitePrusaSL150740 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 4C7EAC8E00ED9EC922A190538C500460 | |||
| Monocure | Rapid | clear | 50 | 8 | 40 | [1] | MonocureRapidclearPrusaSL150840 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id EF134980C1E7A3DC6E59D188EC776FFE | |||
| Monocure | Rapid | grey | 50 | 10 | 30 | [1] | MonocureRapidgreyPrusaSL1501030 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 494D17E39507710AF2917AC4E7D3BB2C | |||
| Monocure | Tuff Rapid | 50 | 6 | 4 | 40 | [7] | MonocureTuff RapidPrusaSL1506440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 8F79916AB9ECC1CDCFC6CFBEB3603238 | |||
| Photocentric | Hard | grey | 50 | 15 | 30 | [1] | PhotocentricHardgreyPrusaSL1501530 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:05, 15 March 2022. poll-id 5619DB33699E19E6D8859677C274ACF0 | |||
| Photocentric | ash grey | 50 | 10 | 30 | [1] | Photocentricash greyPrusaSL1501030 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:05, 15 March 2022. poll-id 5553462DE9C9D3D27590811042186102 | ||||
| Power Resins | Dark | castable | 50 | 20 | 100 | [8] | Power ResinsDarkPrusaSL15020100 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 2C8D6DC10A8AB8AA7245ABAEA2B35D9C | |||
| Power Resins | Opaque | castable | 50 | 15 | 100 | [8] | Power ResinsOpaquePrusaSL15015100 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id BB02674FBFB13CD7BBF132046C75CFF2 | |||
| Power Resins | Wax | castable | 50 | 15 | 100 | [8] | Power ResinsWaxPrusaSL15015100 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 6156BA88E6781447C2AA6BE8D7B1063E | |||
| Power Resins | Zero | castable | 50 | 20 | 100 | [8] | Power ResinsZeroPrusaSL15020100 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id FBBA9BB2B7746DECDFF3611886D7ECE2 | |||
| Prima Creator | Value Tough | 50 | 8 | 10 | 35 | [3][4] | Prima CreatorValue ToughPrusaSL15081035 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id FACFCEAD11DD9FD32902F1CCF52DC79D | |||
| Prusa | ABS-Like | white, clear | 50 | 8 | 30 | [1] | PrusaABS-Likewhite, clearPrusaSL150830 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id CB0D0B1CAF6421068DFAA27B6FA92098 | |||
| Prusa | Dental Casting | green | dental, castable | 50 | 13 | 50 | [1] | PrusaDental CastinggreenPrusaSL1501350 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id A1EC9B99E99204C4E3B6BAEF2AC9BBFD | ||
| Prusa | Flexible | black, red, yellow | flexible | 50 | 9 | 35 | [1] | PrusaFlexibleblack, red, yellowPrusaSL150935 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id E0B64F8BB9B8E698774F023BFDBF6560 | ||
| Prusa | Flexible | blue, clear | flexible | 50 | 5 | 15 | [1] | PrusaFlexibleblue, clearPrusaSL150515 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 50C517A37269A53642F1658C2C03F738 | ||
| Prusa | Flexible | white | flexible | 50 | 35 | [1] | PrusaFlexiblewhitePrusaSL15035 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 175EEEA2797526C68282D6882AF0B8CB | |||
| Prusa | High Tenacity | black | 50 | 7 | 35 | [1] | PrusaHigh TenacityblackPrusaSL150735 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 2AE4B0915C14B7C0427D480856B9D55A | |||
| Prusa | High Tenacity | grey | 50 | 7 | 30 | [1] | PrusaHigh TenacitygreyPrusaSL150730 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 26362967094E01319DF7950782C24F79 | |||
| Prusa | Jewelry Casting | yellow | casting | 50 | 13 | 45 | [1] | PrusaJewelry CastingyellowPrusaSL1501345 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 41608EE08CE90E37BD162EC5475951BA | ||
| Prusa | Solid | yellow | 50 | 7 | 35 | [1] | PrusaSolidyellowPrusaSL150735 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 16D93A5A079AA41233B00DE21189BF36 | |||
| Prusa | Super Low Odor | beige | low odor | 50 | 7.5 | 35 | [1] | PrusaSuper Low OdorbeigePrusaSL1507.535 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id EE7F3D059120494B3C45027477EDCA7D | ||
| Prusa | Super Low Odor | magenta | low odor | 50 | 6 | 35 | [1] | PrusaSuper Low OdormagentaPrusaSL150635 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 8D540B5EF93E4358FF55639A46C2FCCC | ||
| Prusa | Super Low Odor | yellow | low odor | 50 | 5 | 35 | [1] | PrusaSuper Low OdoryellowPrusaSL150535 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id DD400C1573A143C130B96DFB04DE5B78 | ||
| Prusa | Teeth Model | orange-yellow | dental | 50 | 7 | 30 | [1] | PrusaTeeth Modelorange-yellowPrusaSL150730 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 4F28E1DFC7646BEDEA799B8862B661B2 | ||
| Prusa | Tough | azure blue, pink | 50 | 8 | 35 | [1] | PrusaToughazure blue, pinkPrusaSL150835 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 871E03E8C31DA9ECC40665773E73DFAC | |||
| Prusa | Tough | maroon | 50 | 7.5 | 35 | [1] | PrusaToughmaroonPrusaSL1507.535 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 793A47DB49EAD13B0C6C0117F2D5E64F | |||
| Prusa | Tough | transparent | 50 | 7 | 15 | [1] | PrusaToughtransparentPrusaSL150715 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 72B18978E411F4A7A7C86A8C4E1C61B3 | |||
| Prusa | Tough | transparent green, transparent red | 50 | 6 | 35 | [1] | PrusaToughtransparent green, transparent redPrusaSL150635 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id 04F7D79CD463671612B262489D234D8A | |||
| Prusa | Tough | white | 50 | 7.5 | 35 | [1] | PrusaToughwhitePrusaSL1507.535 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:58, 8 March 2022. poll-id A4FD456D478D2B019F89ACF7684DED21 | |||
| ResinWorks3D | green | 50 | 21 | 35 | [1] | ResinWorks3DgreenPrusaSL1502135 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id E9F660773697CD98529B2B725D085636 | ||||
| ResinWorks3D | violet | 50 | 17 | 30 | [1] | ResinWorks3DvioletPrusaSL1501730 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 2282AD574FD074138017A83403AE246F | ||||
| Wanhao | red | 50 | 15 | 10 | 35 | [3][4] | WanhaoredPrusaSL150151035 You must log in to vote 0 0 There were 0 votes since the poll was created on 05:20, 16 March 2022. poll-id BD43F07B69A8FAEAFCBCEE9E68D81842 | |||
| Siraya Tech | Blu | clear v1 | 50 | 13 | 10 | 55 | [3][4] | Siraya TechBluclear v1PrusaSL150131055 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id C6A1331C24FBF1C57A119F0DCAE1BA2F | ||
| Siraya Tech | Blu | clear v2 | 50 | 11 | 10 | 25 | [3][4] | Siraya TechBluclear v2PrusaSL150111025 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 15CE1107FFD6E37D7D100B23E6029106 | ||
| Siraya Tech | Blu | emerald blue | 50 | 7 | 10 | 40 | [3][4] | Siraya TechBluemerald bluePrusaSL15071040 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id F23851E2494FA562294B4CFF0A6B482B | ||
| Siraya Tech | Build | 50 | 7 | 10 | 45 | [9] | Siraya TechBuildPrusaSL15071045 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id B37F2253A8365843281D6A9D88641486 | |||
| Siraya Tech | Fast | black | 50 | 5.5 | 10 | 30 | [3][4] | Siraya TechFastblackPrusaSL1505.51030 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 46F3FA554B47D0161743EA14C486A867 | ||
| Siraya Tech | Fast | grey | 50 | 7.5 | 35 | [3][4] | Siraya TechFastgreyPrusaSL1507.535 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 2C1931505DF31D86F620B1A38FA53257 | |||
| Siraya Tech | Fast | navy grey | 50 | 9 | 10 | 30 | [3][4] | Siraya TechFastnavy greyPrusaSL15091030 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id DC111ECAEF8B60A07A11AB270AA5C72B | ||
| Siraya Tech | Simple | 50 | 4.5 | 4 | 30 | [3][4] | Siraya TechSimplePrusaSL1504.5430 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 6ABFF40E30EDCCD3F0D3FC9E0D546A30 |
How to use the spreadsheet (Step-by-step)
1. Find the resin you'd like to use
You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes.
If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.
2. Check the source
The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations.
3. Copy the parameters into your slicer
The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.)
Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model.
4. Print a test file for validation
This is a crucial step, and one you shouldn't skip. Every printer is slightly different, and the settings that work on one unit might not work the same on another.
As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.
You should always start out with a small test file to check if the settings work before launching a larger print.
5. Inspect the test file
If the print looks good, you can go ahead and use the settings as they are.
If you see any imperfections, (such as lack of detail, brittleness, discoloration etc.) adjust the settings according to the resin validation guide.
6. Help out others
If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.)
If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters.
You can help even more by adding other compatible resins with the Add new settings button.
Other important factors
There are some factors that greatly influence your printing success no matter what material you choose.
1. Maintain adequate temperature
You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.
2. Shake your resin
Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.
You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.
3. Check your expiration date
Keep away from direct sunlight. Store in a cool, dry place. Do not exceed expiration date. Use soon after opening.
What's true for most of your food cupboard is true for resins as well.
While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.
Resin settings explained
If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.
The Prusa SL1 is an open type of 3D printer. This means it can use any brand of resin, not just the ones sold by Prusa.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems.
For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
- Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly.
- μm: 1 micron or 0.001 milimeters.
- Normal exposure time: The amount of time each normal layer will be cured for.
- Number of base layers: At the start of the print, you must cure a few layers for a longer time. This helps the model stick to the build plate.
- Base layer exposure time: The amount of time each base layer will be cured for.
- Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.
Community tips
If you have a tip related to Prusa SL1 resin settings, tell others about it below.
- ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.30 1.31 1.32 1.33 1.34 1.35 1.36 1.37 1.38 1.39 1.40 1.41 1.42 1.43 1.44 1.45 1.46 1.47 "Tested resins". Prusa Knowledge Base.
- ↑ "3D Resin Print Settings". 4D Filtration.
- ↑ 3.00 3.01 3.02 3.03 3.04 3.05 3.06 3.07 3.08 3.09 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23 3.24 3.25 3.26 3.27 "Prusa SL1 Resin Settings". Google Sheets.
- ↑ 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.25 4.26 4.27 "Prusa Community Forum - Official Prusa SL1 Group". Facebook.
- ↑ 5.0 5.1 5.2 5.3 "3D Printing Settings". AmeraLabs.
- ↑ 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 "Compatible 3D-printers with Liqcreate resins". Liqcreate.
- ↑ 7.0 7.1 7.2 7.3 7.4 7.5 7.6 "Printer Settings". Monocure 3D.
- ↑ 8.0 8.1 8.2 8.3 "Printer Settings". powerresins.
- ↑ "support". Siraya Tech.
Enable comment auto-refresher