Phrozen Sonic Mini 8K resin settings
From Maker Trainer, the online makerspace
Below you can find a list of resins which are compatible with the Phrozen Sonic Mini 8K.
The Sonic Mini 8K is an open material 3D printer, meaning it can print with any brand of resin, not just the ones made by Phrozen. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them.
You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.
Phrozen Sonic Mini 8K resin settings spreadsheet
The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.
The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.
| Resin brand | Resin name | Resin color | Resin type | At layer height (μm) | Exp. time (s) | Base layer count | Base exp. time (s) | Light off time (s) | Ref | Confirm |
|---|---|---|---|---|---|---|---|---|---|---|
| 3D Resin Solutions | HARD Rapid ABS | 50 | 3.5 | 10 | 40 | 1 | [1] | 3D Resin SolutionsHARD Rapid ABSPhrozenSonic Mini 8K503.510401 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id EFF24B8C33A8484C06E1BBDF17B655B0 | ||
| 3D Resin Solutions | HERO Evolution | 50 | 4 | 10 | 45 | 1 | [1] | 3D Resin SolutionsHERO EvolutionPhrozenSonic Mini 8K50410451 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 30890C5FD10013A29BE1CAA8D277462A | ||
| 3D Resin Solutions | HERO Tough | 50 | 4.5 | 10 | 55 | 1 | [1] | 3D Resin SolutionsHERO ToughPhrozenSonic Mini 8K504.510551 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 5D5838B851E1A8F6C94536A7031762C5 | ||
| 3D Resin Solutions | Standard V2 | 50 | 4.5 | 10 | 50 | 1 | [1] | 3D Resin SolutionsStandard V2PhrozenSonic Mini 8K504.510501 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 4FB5BC731EDE4CCEBE05991E88EEDCDC | ||
| 3D Resin Solutions | Studio Fabrication | 50 | 4 | 10 | 50 | 1 | [1] | 3D Resin SolutionsStudio FabricationPhrozenSonic Mini 8K50410501 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:54, 6 March 2022. poll-id 8D4001BCDC700A23398C8A7D2B913A0B | ||
| Dentona | Optiprint Cast | dental, castable | 50 | 4.6 | 6 | 30 | 3 | [2][3] | DentonaOptiprint CastPhrozenSonic Mini 8K504.66303 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:10, 17 March 2022. poll-id 9DD536AAAF83D15FAF7883BA9A2AABB2 | |
| Dentona | Optiprint Denture 385 | dental | 50 | 4.6 | 6 | 30 | 4 | [2][3] | DentonaOptiprint Denture 385PhrozenSonic Mini 8K504.66304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:10, 17 March 2022. poll-id 2BB878FBCADEF817903BEC4122283F3B | |
| Dentona | Optiprint Gingiva 385 | dental | 50 | 8.5 | 6 | 30 | 5 | [2][3] | DentonaOptiprint Gingiva 385PhrozenSonic Mini 8K508.56305 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:10, 17 March 2022. poll-id 38BE71CA22E2CED12EF6CD3A51ADC3BA | |
| Dentona | Optiprint Guide 405 | dental | 50 | 7.5 | 6 | 30 | 3 | [2][3] | DentonaOptiprint Guide 405PhrozenSonic Mini 8K507.56303 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:10, 17 March 2022. poll-id B1F4352EE4C13907845880AFDD683FBB | |
| Dentona | Optiprint Model 48052 | dental | 50 | 8.5 | 6 | 30 | 5 | [2][3] | DentonaOptiprint Model 48052PhrozenSonic Mini 8K508.56305 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:10, 17 March 2022. poll-id E7CBB16C091A907B33A30C825870E7DA | |
| Dentona | Optiprint Model 48053 | dental | 50 | 6.5 | 6 | 30 | 4 | [2][3] | DentonaOptiprint Model 48053PhrozenSonic Mini 8K506.56304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:10, 17 March 2022. poll-id 59453A5486D4D6015E1715A827BE1219 | |
| Dentona | Optiprint Temp | dental | 50 | 4.6 | 6 | 30 | 3 | [2][3] | DentonaOptiprint TempPhrozenSonic Mini 8K504.66303 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:10, 17 March 2022. poll-id 74D5F42186D247D396347C584A87F068 | |
| Dentona | Optiprint Tray 385 | dental | 50 | 8.5 | 6 | 30 | 4 | [2][3] | DentonaOptiprint Tray 385PhrozenSonic Mini 8K508.56304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:10, 17 March 2022. poll-id C4315E6469C234990C1C0E50D58566BD | |
| Detax | Freeprint Cast 2.0 | dental, castable | 50 | 6 | 6 | 20 | 4 | [2][3] | DetaxFreeprint Cast 2.0PhrozenSonic Mini 8K5066204 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:14, 17 March 2022. poll-id 1D7617AEAF2A23690F6B1D3B80C8C61D | |
| Detax | Freeprint Model 2.0 | dental | 100 | 6 | 6 | 20 | 5 | [2][3] | DetaxFreeprint Model 2.0PhrozenSonic Mini 8K10066205 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:14, 17 March 2022. poll-id 89E5BC9D10FC7B5C5EF954938710D87E | |
| Detax | Freeprint Ortho | dental | 50 | 7 | 6 | 20 | 4 | [2][3] | DetaxFreeprint OrthoPhrozenSonic Mini 8K5076204 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:14, 17 March 2022. poll-id 27774C251D3B85008361EF933BE84256 | |
| Detax | Freeprint Temp | dental | 100 | 5 | 6 | 20 | 4 | [2][3] | DetaxFreeprint TempPhrozenSonic Mini 8K10056204 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:14, 17 March 2022. poll-id A9133E597D061158221B3149C1327B68 | |
| Dreve | FotoDent Cast | dental, castable | 50 | 4.5 | 6 | 30 | 3 | [2][3] | DreveFotoDent CastPhrozenSonic Mini 8K504.56303 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:19, 17 March 2022. poll-id 4B87B45457474BCE5E23067CC94DF307 | |
| Dreve | FotoDent Denture Opak 385nm | dental | 50 | 8.5 | 6 | 30 | 4 | [2][3] | DreveFotoDent Denture Opak 385nmPhrozenSonic Mini 8K508.56304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:19, 17 March 2022. poll-id 8F9B4FCA43837705913302396FDC4CAD | |
| Dreve | FotoDent Denture Transparent 385nm | dental | 50 | 8.5 | 6 | 30 | 3 | [2][3] | DreveFotoDent Denture Transparent 385nmPhrozenSonic Mini 8K508.56303 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:19, 17 March 2022. poll-id 7590D9210704288919AB1A8402184C4C | |
| Dreve | FotoDent Guide 385nm | dental | 50 | 8.5 | 6 | 30 | 4 | [2][3] | DreveFotoDent Guide 385nmPhrozenSonic Mini 8K508.56304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:19, 17 March 2022. poll-id 58B01507B9378A9A7456D5074F9DE74A | |
| Dreve | FotoDent Guide 405nm | dental | 50 | 8.5 | 6 | 30 | 4 | [2][3] | DreveFotoDent Guide 405nmPhrozenSonic Mini 8K508.56304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:19, 17 March 2022. poll-id 22ECCD96EA2721D0C1CB96F3A176AE4A | |
| Dreve | FotoDent IBT 385nm | dental | 50 | 10.5 | 6 | 30 | 10 | [2][3] | DreveFotoDent IBT 385nmPhrozenSonic Mini 8K5010.563010 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:19, 17 March 2022. poll-id B6EC7E8837FD25AC58DB0B5FE5C488EC | |
| Dreve | FotoDent Model2 385nm | dental | 50 | 7.5 | 6 | 30 | 3 | [2][3] | DreveFotoDent Model2 385nmPhrozenSonic Mini 8K507.56303 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:19, 17 March 2022. poll-id 8D1D4472A32E397670EC677F54047AFD | |
| Dreve | FotoDent Splint 385nm | dental | 50 | 11 | 6 | 30 | 10 | [2][3] | DreveFotoDent Splint 385nmPhrozenSonic Mini 8K501163010 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:19, 17 March 2022. poll-id FED8621D373B06C6755C0043195E1FFF | |
| Enlighten | AA Temp | dental | 50 | 4 | 6 | 20 | 4 | [2][3] | EnlightenAA TempPhrozenSonic Mini 8K5046204 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:00, 7 March 2022. poll-id 17173A5FAEE72A43E6310D1BCC34E8A3 | |
| Enlighten | DD Guide | dental | 100 | 6 | 6 | 20 | 4 | [2][3] | EnlightenDD GuidePhrozenSonic Mini 8K10066204 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:00, 7 March 2022. poll-id 4B6A488FBAAC50F015C9AFEADDBA058A | |
| Graphy | Tera Harz TC-80DP A2 | dental | 50 | 5 | 6 | 15 | 9 | [2][3] | GraphyTera Harz TC-80DP A2PhrozenSonic Mini 8K5056159 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:39, 19 March 2022. poll-id 940B1B44E22F2406C7325A20269BB48E | |
| Graphy | Tera Harz TFD 23-5 | dental | 50 | 7 | 6 | 20 | 2 | [2][3] | GraphyTera Harz TFD 23-5PhrozenSonic Mini 8K5076202 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:39, 19 March 2022. poll-id 8C44B094CEACDD740F4B8700F237F78A | |
| HARZ Labs | Dental | sand | dental | 50 | 1.5 | 6 | 20 | 3 | [2][3] | HARZ LabsDentalsandPhrozenSonic Mini 8K501.56203 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:07, 7 March 2022. poll-id 1497C77E2491D556B49820054229AF37 |
| HARZ Labs | Dental | yellow clear | dental | 50 | 11 | 6 | 15 | 3 | [2][3] | HARZ LabsDentalyellow clearPhrozenSonic Mini 8K50116153 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:07, 7 March 2022. poll-id 703EB8F2FC3AC68BF0862FBE0DF82644 |
| HARZ Labs | Dental Cast | dental, castable | 50 | 3.5 | 6 | 25 | 3 | [2][3] | HARZ LabsDental CastPhrozenSonic Mini 8K503.56253 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:07, 7 March 2022. poll-id 5D0FDDB2F254B08EF6917FC66821455A | |
| HARZ Labs | Dental Model | black, grey | dental | 50 | 1.6 | 6 | 20 | 3 | [2][3] | HARZ LabsDental Modelblack, greyPhrozenSonic Mini 8K501.66203 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:07, 7 March 2022. poll-id E3E9E29826B72831FB23EA7B695486FF |
| Keystone Keyprint | KeyCast | dental, castable | 50 | 10 | 6 | 20 | 6 | [2][3] | Keystone KeyprintKeyCastPhrozenSonic Mini 8K50106206 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:47, 7 March 2022. poll-id 46570E32C50E60B47370826C6907C217 | |
| Keystone Keyprint | KeyGuide | dental | 50 | 9.5 | 6 | 20 | 6 | [2][3] | Keystone KeyprintKeyGuidePhrozenSonic Mini 8K509.56206 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:47, 7 March 2022. poll-id 0846EEDA347947A16B5F939A5AE873FA | |
| Keystone Keyprint | KeyModel | dental | 50 | 8.5 | 6 | 20 | 6 | [2][3] | Keystone KeyprintKeyModelPhrozenSonic Mini 8K508.56206 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:47, 7 March 2022. poll-id AD857D6973D2DAAF363BA516B477E4F9 | |
| Keystone Keyprint | KeyOrthoModel | dental | 100 | 12 | 6 | 20 | 6 | [2][3] | Keystone KeyprintKeyOrthoModelPhrozenSonic Mini 8K100126206 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:47, 7 March 2022. poll-id D905E84F3F655AB9D4863D099A09D29B | |
| Keystone Keyprint | KeySplint Soft | dental | 100 | 13 | 4 | 30 | 7 | [2][3] | Keystone KeyprintKeySplint SoftPhrozenSonic Mini 8K100134307 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:47, 7 March 2022. poll-id E8C1F2E9432596DD4C226340AAC9ECFC | |
| Keystone Keyprint | KeyTray | dental | 100 | 21 | 6 | 20 | 6 | [2][3] | Keystone KeyprintKeyTrayPhrozenSonic Mini 8K100216206 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:47, 7 March 2022. poll-id A871C1B3684C1BC7CBC2E59463E23325 | |
| NextDent | C&B MFH | N1 | dental | 50 | 4.5 | 6 | 30 | 4 | [2][3] | NextDentC&B MFHN1PhrozenSonic Mini 8K504.56304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 15 March 2022. poll-id 3ADA703F68D451BA31608A518968F8C9 |
| NextDent | Cast | purple | dental, castable | 50 | 3.5 | 6 | 30 | 5 | [2][3] | NextDentCastpurplePhrozenSonic Mini 8K503.56305 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 15 March 2022. poll-id 6DF3EF87A912C791772F02D7CB56FDE9 |
| NextDent | Denture | opaque pink | dental | 50 | 5 | 6 | 30 | 3 | [2][3] | NextDentDentureopaque pinkPhrozenSonic Mini 8K5056303 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 15 March 2022. poll-id 2646D9B3A3BEC52F8EA2FFEFD0468669 |
| NextDent | Model 2.0 | white | dental | 50 | 3.5 | 6 | 30 | 4 | [2][3] | NextDentModel 2.0whitePhrozenSonic Mini 8K503.56304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 15 March 2022. poll-id 96C34EBDC102F7626AE981D8C3D69091 |
| NextDent | Ortho Clear | clear | dental | 50 | 4.5 | 6 | 30 | 4 | [2][3] | NextDentOrtho ClearclearPhrozenSonic Mini 8K504.56304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 15 March 2022. poll-id F11A3952CFDA73209C09E427DE5E237A |
| NextDent | Ortho IBT | clear | dental | 50 | 5.5 | 6 | 30 | 4 | [2][3] | NextDentOrtho IBTclearPhrozenSonic Mini 8K505.56304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 15 March 2022. poll-id 5FC4970BEC2A12D962A1BFD1AEEE9E02 |
| NextDent | Ortho Rigid | blue | dental | 50 | 6 | 6 | 30 | 4 | [2][3] | NextDentOrtho RigidbluePhrozenSonic Mini 8K5066304 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 15 March 2022. poll-id AA42BB478BEE5D8B54D954BCE4E790F0 |
| NextDent | SG | orange | dental | 50 | 3.5 | 6 | 30 | 5 | [2][3] | NextDentSGorangePhrozenSonic Mini 8K503.56305 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 15 March 2022. poll-id D9D227F00A6ECEA68286BA6388FA4510 |
| NextDent | Tray | blue | dental | 50 | 3.5 | 6 | 30 | 5 | [2][3] | NextDentTraybluePhrozenSonic Mini 8K503.56305 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 15 March 2022. poll-id 060D25763C6FB26C283D91A753D0D7F4 |
| Phrozen | ABS-Like | grey, white | 50 | 2 | 6 | 30 | 2 | [2][3] | PhrozenABS-Likegrey, whitePhrozenSonic Mini 8K5026302 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id EC2265FCEF5A81FDBDAF4D9FB0134698 | |
| Phrozen | Aqua | green, blue, grey 4K, ivory 4K, grey 8K | 50 | 2 | 6 | 30 | 2 | [2][3] | PhrozenAquagreen, blue, grey 4K, ivory 4K, grey 8KPhrozenSonic Mini 8K5026302 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id E787219A70EBD0F25D655271BE45F75B | |
| Phrozen | Basic | beige | 50 | 3 | 6 | 30 | 4 | [2][3] | PhrozenBasicbeigePhrozenSonic Mini 8K5036304 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 34C05634A3B13163DAAF361E7FB6C45A | |
| Phrozen | Flex | beige | flexible | 50 | 2 | 6 | 30 | 3 | [2][3] | PhrozenFlexbeigePhrozenSonic Mini 8K5026303 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 5CAADB2EBAA6DDA0591BECEE6151B0D7 |
| Phrozen | Low-Irritation | beige | 50 | 3 | 6 | 50 | 4 | [2][3] | PhrozenLow-IrritationbeigePhrozenSonic Mini 8K5036504 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 260AE8F0129B711AFC95641A462EBF04 | |
| Phrozen | Mud-Like | coral | 50 | 4 | 6 | 40 | 5 | [2][3] | PhrozenMud-LikecoralPhrozenSonic Mini 8K5046405 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 77FDB8A57663895F9AF37553102D654F | |
| Phrozen | Nylon Tough | translucent green | 50 | 2 | 6 | 30 | 4 | [2][3] | PhrozenNylon Toughtranslucent greenPhrozenSonic Mini 8K5026304 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 863DEDC9CA7EAA0A961AC3B550753060 | |
| Phrozen | ONYX Rigid Pro 410 | black | 50 | 7 | 6 | 35 | 6 | [2][3] | PhrozenONYX Rigid Pro 410blackPhrozenSonic Mini 8K5076356 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id B689977CBEFA6ADA4201BE81F57A8678 | |
| Phrozen | Rock Stiff | black | 50 | 5 | 6 | 30 | 2 | [2][3] | PhrozenRock StiffblackPhrozenSonic Mini 8K5056302 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 9DE9C9FFE14EC78FEFED5951FA1E62E7 | |
| Phrozen | SC-801 | clear | 50 | 3 | 6 | 30 | 2 | [2][3] | PhrozenSC-801clearPhrozenSonic Mini 8K5036302 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id DF07A4064C6FDC0A8D7E89F20AE4A04B | |
| Phrozen | TR250 | deep grey | high temp | 50 | 3 | 6 | 30 | 4 | [2][3] | PhrozenTR250deep greyPhrozenSonic Mini 8K5036304 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 96C1D1E7818F952EC57FE24D0C8D3D00 |
| Phrozen | TR250LV | grey | high temp | 50 | 2 | 6 | 30 | 2 | [2][3] | PhrozenTR250LVgreyPhrozenSonic Mini 8K5026302 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 77BB8F0CB7978A399257D11B48EF7A36 |
| Phrozen | TR300 Ultra-High Temp | grey | high temp | 50 | 2 | 6 | 15 | 2 | [2][3] | PhrozenTR300 Ultra-High TempgreyPhrozenSonic Mini 8K5026152 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 8F4D310E31808E390DA76E27547B2856 |
| Phrozen | Water-Washable | black | water washable | 50 | 2.5 | 6 | 30 | 2 | [2][3] | PhrozenWater-WashableblackPhrozenSonic Mini 8K502.56302 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 3251C0D7ECE7FCE8C2574F23E6F76B3A |
| Phrozen | Water-Washable | grey | water washable | 50 | 2 | 6 | 30 | 2 | [2][3] | PhrozenWater-WashablegreyPhrozenSonic Mini 8K5026302 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id CEC331F7747CD904BB0CC006F9EA8D12 |
| Phrozen | Water-Washable Dental Model | beige | water washable, dental | 50 | 5 | 6 | 30 | 2 | [2][3] | PhrozenWater-Washable Dental ModelbeigePhrozenSonic Mini 8K5056302 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 416D69AABC45FBE18BB0AD6C2097F06B |
| Phrozen | Wax-Like | green | castable | 50 | 2.5 | 6 | 30 | 4 | [2][3] | PhrozenWax-LikegreenPhrozenSonic Mini 8K502.56304 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id AFBD67479137823247306A6293E7F317 |
| Phrozen | Wax-Like | violet | castable | 50 | 5 | 6 | 40 | 6 | [2][3] | PhrozenWax-LikevioletPhrozenSonic Mini 8K5056406 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id B76CB79C74EA8E473417586DE4596A95 |
| Saremco | Crowntec | dental | 50 | 4 | 6 | 25 | 4 | [2][3] | SaremcoCrowntecPhrozenSonic Mini 8K5046254 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 4B4CEA73DFBD9EE021C8317A63C1DE15 | |
| Whip Mix | VeriCast | blue | dental, castable | 50 | 7 | 6 | 30 | 2 | [2][3] | Whip MixVeriCastbluePhrozenSonic Mini 8K5076302 You must log in to vote 0 0 There were 0 votes since the poll was created on 05:33, 16 March 2022. poll-id 12F71A7250157994A09BEECB2F51E086 |
| Whip Mix | VeriCast | red | dental, castable | 50 | 10 | 6 | 40 | 3 | [2][3] | Whip MixVeriCastredPhrozenSonic Mini 8K50106403 You must log in to vote 0 0 There were 0 votes since the poll was created on 05:33, 16 March 2022. poll-id 1EF5664B59A4F587E6CAA146A947BE80 |
| Whip Mix | VeriGuide | dental | 50 | 11 | 6 | 30 | 2 | [2][3] | Whip MixVeriGuidePhrozenSonic Mini 8K50116302 You must log in to vote 0 0 There were 0 votes since the poll was created on 05:33, 16 March 2022. poll-id ADEAAF6BD56A7D7724D6409C37632986 | |
| Whip Mix | VeriModel | golden brown | dental | 50 | 8 | 6 | 30 | 3 | [2][3] | Whip MixVeriModelgolden brownPhrozenSonic Mini 8K5086303 You must log in to vote 0 0 There were 0 votes since the poll was created on 05:33, 16 March 2022. poll-id E9E50A6724BD2AB2697E0C429FAF1AD9 |
| Whip Mix | VeriModel | white | dental | 50 | 7 | 6 | 30 | 3 | [2][3] | Whip MixVeriModelwhitePhrozenSonic Mini 8K5076303 You must log in to vote 0 0 There were 0 votes since the poll was created on 05:33, 16 March 2022. poll-id ED8F26763533526C120A57F190402365 |
How to use the spreadsheet (Step-by-step)
1. Find the resin you'd like to use
You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes.
If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.
2. Check the source
The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations.
3. Copy the parameters into your slicer
The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.)
Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model.
4. Print a test file for validation
This is a crucial step, and one you shouldn't skip. Every printer is slightly different, and the settings that work on one unit might not work the same on another.
As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.
You should always start out with a small test file to check if the settings work before launching a larger print.
5. Inspect the test file
If the print looks good, you can go ahead and use the settings as they are.
If you see any imperfections, (such as lack of detail, brittleness, discoloration etc.) adjust the settings according to the resin validation guide.
6. Help out others
If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.)
If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters.
You can help even more by adding other compatible resins with the Add new settings button.
Other important factors
There are some factors that greatly influence your printing success no matter what material you choose.
1. Maintain adequate temperature
You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.
2. Shake your resin
Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.
You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.
3. Check your expiration date
Keep away from direct sunlight. Store in a cool, dry place. Do not exceed expiration date. Use soon after opening.
What's true for most of your food cupboard is true for resins as well.
While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.
Resin settings explained
If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.
The Phrozen Sonic Mini 8K is an open type of 3D printer. This means it can use any brand of resin, not just the ones sold by Phrozen.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems.
For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
- Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly.
- μm: 1 micron or 0.001 milimeters.
- Normal exposure time: The amount of time each normal layer will be cured for.
- Number of base layers: At the start of the print, you must cure a few layers for a longer time. This helps the model stick to the build plate.
- Base layer exposure time: The amount of time each base layer will be cured for.
- Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.
Community tips
If you have a tip related to Phrozen Sonic Mini 8K resin settings, tell others about it below.
- ↑ 1.0 1.1 1.2 1.3 1.4 "#3DRS Resin Settings & Support". 3D Resin Solutions.
- ↑ 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 2.22 2.23 2.24 2.25 2.26 2.27 2.28 2.29 2.30 2.31 2.32 2.33 2.34 2.35 2.36 2.37 2.38 2.39 2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.50 2.51 2.52 2.53 2.54 2.55 2.56 2.57 2.58 2.59 2.60 2.61 2.62 2.63 2.64 2.65 2.66 "Phrozen Resin Profile". Google Sheets.
- ↑ 3.00 3.01 3.02 3.03 3.04 3.05 3.06 3.07 3.08 3.09 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23 3.24 3.25 3.26 3.27 3.28 3.29 3.30 3.31 3.32 3.33 3.34 3.35 3.36 3.37 3.38 3.39 3.40 3.41 3.42 3.43 3.44 3.45 3.46 3.47 3.48 3.49 3.50 3.51 3.52 3.53 3.54 3.55 3.56 3.57 3.58 3.59 3.60 3.61 3.62 3.63 3.64 3.65 3.66 "Resin Profile – Phrozen Technology". Phrozen3D.com.
Enable comment auto-refresher