Phrozen Shuffle & Shuffle Lite resin settings
Below you can find a list of resins which are compatible with the Phrozen Shuffle and Shuffle Lite.
These are open material 3D printers, meaning they can print with any brand of resin, not just the ones made by Phrozen. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them.
You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.
Phrozen Shuffle & Shuffle Lite resin settings spreadsheet
The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.
The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.
| Resin brand | Resin name | Resin color | Resin type | At layer height (μm) | Exp. time (s) | Base layer count | Base exp. time (s) | Light off time (s) | Ref | Confirm |
|---|---|---|---|---|---|---|---|---|---|---|
| BlueCast | CR3A | castable | 50 | 5 | 50 | 11 | [1] | BlueCastCR3APhrozenShuffle, Shuffle Lite5055011 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id E7FBC822F535AA706E66A674BC14C320 | ||
| BlueCast | Dental | grey, beige | castable, dental | 50 | 5 | 60 | 13 | [1] | BlueCastDentalgrey, beigePhrozenShuffle, Shuffle Lite5056013 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 72C5B7108109C0C766C7DF72F5245336 | |
| BlueCast | Model HR | 50 | 5 | 60 | 13 | [1] | BlueCastModel HRPhrozenShuffle, Shuffle Lite5056013 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id C268B1365292CCBCE0ACF132A7D40F05 | |||
| BlueCast | Original | castable | 50 | 5 | 70 | 14 | [1] | BlueCastOriginalPhrozenShuffle, Shuffle Lite5057014 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 58D76B44E3837D17B01B9F5DDF922CB7 | ||
| BlueCast | X10 | castable | 50 | 5 | 70 | 12 | [1] | BlueCastX10PhrozenShuffle, Shuffle Lite5057012 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id DA7A00199B75E15EA443344B65B25BCE | ||
| BlueCast | X5 | castable | 50 | 5 | 70 | 12 | [1] | BlueCastX5PhrozenShuffle, Shuffle Lite5057012 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 024D5E325BA3E80DFCB70CC04CE853EE | ||
| DruckWege | Type D | black | 50 | 7 | 8 | 90 | [2] | DruckWegeType DblackPhrozenShuffle, Shuffle Lite507890 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 78320562F2AEEA0964099E7E3306AAA1 | ||
| DruckWege | Type D | blue, green, orange, red | 50 | 7 | 8 | 85 | [2] | DruckWegeType Dblue, green, orange, redPhrozenShuffle, Shuffle Lite507885 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 7224EF21CEFC5D4326E3543B6518531B | ||
| DruckWege | Type D | grey, white | 50 | 7 | 8 | 100 | [2] | DruckWegeType Dgrey, whitePhrozenShuffle, Shuffle Lite5078100 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id AF75F4BF1A7BA4374DBCA515849BD7BE | ||
| DruckWege | Type D Castable Wax | castable | 50 | 7 | 8 | 85 | [2] | DruckWegeType D Castable WaxPhrozenShuffle, Shuffle Lite507885 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id D2E7E373E5FEBDFC5FE5B586AC9F2954 | ||
| DruckWege | Type D Dental | dental | 50 | 7.5 | 8 | 90 | [2] | DruckWegeType D DentalPhrozenShuffle, Shuffle Lite507.5890 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 6F7CB50A84060656BE2A014519BE42C2 | ||
| DruckWege | Type D Flex | flexible | 50 | 11 | 8 | 85 | [2] | DruckWegeType D FlexPhrozenShuffle, Shuffle Lite5011885 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id B3C02A1320AA143CB27AF294043E9B61 | ||
| DruckWege | Type D Gingive | dental | 50 | 10.5 | 8 | 85 | [2] | DruckWegeType D GingivePhrozenShuffle, Shuffle Lite5010.5885 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 8600B294C76B85C5DA0AB80FBA181A4C | ||
| DruckWege | Type D High Temp | high temp | 50 | 12 | 8 | 140 | [2] | DruckWegeType D High TempPhrozenShuffle, Shuffle Lite50128140 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id BC57060EF0CBCB4BC8AA7B70031E895C | ||
| DruckWege | Type D Pigment Free | 50 | 7.5 | 8 | 85 | [2] | DruckWegeType D Pigment FreePhrozenShuffle, Shuffle Lite507.5885 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id FE15ACC5A07CFC425947F15372CEF5C0 | |||
| DruckWege | Type D Pro | 50 | 9.5 | 8 | 100 | [2] | DruckWegeType D ProPhrozenShuffle, Shuffle Lite509.58100 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id D86A74F7A8DDC2BC67CBB3FD38B388B1 | |||
| Enlighten | CC Tray | 50 | 12 | 6 | 60 | [3] | EnlightenCC TrayPhrozenShuffle, Shuffle Lite5012660 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id E1C02D5E0B22DDD60B8997933C4A5F00 | |||
| Enlighten | DD Guide for LCD | 50 | 16 | 6 | 60 | [3] | EnlightenDD Guide for LCDPhrozenShuffle, Shuffle Lite5016660 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id AEAE6D2E2E223EEE06F07814B7DA1D07 | |||
| Enlighten | Dental model | 50 | 12 | 6 | 60 | [3] | EnlightenDental modelPhrozenShuffle, Shuffle Lite5012660 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 47E27C6D13987BAA646818862671F0D9 | |||
| Enlighten | New AA Temp | 50 | 13 | 6 | 60 | [3] | EnlightenNew AA TempPhrozenShuffle, Shuffle Lite5013660 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id D78EF25A5B4798473DC633DB32863904 | |||
| Enlighten | New BB Base | 50 | 13 | 6 | 60 | [3] | EnlightenNew BB BasePhrozenShuffle, Shuffle Lite5013660 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 81F34D14FE13E66786C25D579D42AA88 | |||
| Fun To Do | Industrial Blend | red | 50 | 10.5 | 8 | 60 | [4][5] | Fun To DoIndustrial BlendredPhrozenShuffle, Shuffle Lite5010.5860 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:08, 7 March 2022. poll-id FA241434E6119BE4BBACACA0B6C7FC33 | ||
| Liqcreate | Clear Impact | clear | 50 | 40 | 70 | [6] | LiqcreateClear ImpactclearPhrozenShuffle, Shuffle Lite504070 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 15427B30F7A9CAFAC057091108B88A83 | |||
| Liqcreate | Deep Blue | blue | 50 | 28 | 5 | 170 | [6] | LiqcreateDeep BluebluePhrozenShuffle, Shuffle Lite50285170 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id E72A7843B9C4C6D9632072F989B514B4 | ||
| Liqcreate | Hazard Glow | glow in the dark | 50 | 40 | 70 | [6] | LiqcreateHazard GlowPhrozenShuffle, Shuffle Lite504070 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 0F55ABCBA165F08FE7359C8D1DBDFD92 | |||
| Liqcreate | Premium Black | black | 50 | 12 | 5 | 110 | [6] | LiqcreatePremium BlackblackPhrozenShuffle, Shuffle Lite50125110 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id F6669BEA9A58603FB1797EB68A5CC41E | ||
| Liqcreate | Premium Model | 50 | 12 | 5 | 110 | [6] | LiqcreatePremium ModelPhrozenShuffle, Shuffle Lite50125110 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 5E5B57C9829C540DE5D2A325CD488A13 | |||
| Liqcreate | Premium White | white | 50 | 11 | 5 | 120 | [6] | LiqcreatePremium WhitewhitePhrozenShuffle, Shuffle Lite50115120 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 73E237AF0A9CD08562F5A54DB9B01012 | ||
| Liqcreate | Stone Coal Black | black | 50 | 40 | 70 | [6] | LiqcreateStone Coal BlackblackPhrozenShuffle, Shuffle Lite504070 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 59B5341C8421B1E8F55605CF5A27BC94 | |||
| Liqcreate | Strong-X | 50 | 35 | 60 | [6] | LiqcreateStrong-XPhrozenShuffle, Shuffle Lite503560 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 5F168713C75B9531EE7D280768CB303B | ||||
| Photocentric | UV DLP Castable | violet | castable | 50 | 16 | 5 | 55 | [7] | PhotocentricUV DLP CastablevioletPhrozenShuffle, Shuffle Lite5016555 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:14, 15 March 2022. poll-id 759DE17082ACD5D3CB22A6C5BC0D7F18 | |
| Photocentric | UV DLP Firm | grey, white | 50 | 16 | 5 | 64 | [7] | PhotocentricUV DLP Firmgrey, whitePhrozenShuffle, Shuffle Lite5016564 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:14, 15 March 2022. poll-id D4A4ADAA490732C7141373331E086812 | ||
| Photocentric | UV DLP Firm | red | 50 | 14 | 5 | 56 | [7] | PhotocentricUV DLP FirmredPhrozenShuffle, Shuffle Lite5014556 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id 49C395EC485B17250BBC8F522A5A55A4 | ||
| Photocentric | UV DLP Flex | black | flexible | 50 | 17 | 5 | 68 | [7] | PhotocentricUV DLP FlexblackPhrozenShuffle, Shuffle Lite5017568 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id 657BBEBAB55468FE8125C7D409528A2F | |
| Photocentric | UV DLP Flex | clear | flexible | 50 | 16 | 5 | 64 | [7] | PhotocentricUV DLP FlexclearPhrozenShuffle, Shuffle Lite5016564 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id E46C9CDB216291C65382D3F6865C10DC | |
| Photocentric | UV DLP Flex | white | flexible | 50 | 18 | 5 | 72 | [7] | PhotocentricUV DLP FlexwhitePhrozenShuffle, Shuffle Lite5018572 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id B3AC77264934505CA0884589ECF76A3B | |
| Photocentric | UV DLP Hard | black | 50 | 16 | 5 | 64 | [7] | PhotocentricUV DLP HardblackPhrozenShuffle, Shuffle Lite5016564 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id 85D4CA3CBC2B4D680AB0A690179E4BE0 | ||
| Photocentric | UV DLP Hard | clear | 50 | 10 | 5 | 40 | [7] | PhotocentricUV DLP HardclearPhrozenShuffle, Shuffle Lite5010540 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id BD85B2869CB92E765803DB95ACD9E450 | ||
| Photocentric | UV DLP Hard | grey | 50 | 15 | 5 | 60 | [7] | PhotocentricUV DLP HardgreyPhrozenShuffle, Shuffle Lite5015560 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id 7FA2A46910B1961811C30129C68D3729 | ||
| Photocentric | UV DLP Hard | white | 50 | 12 | 5 | 48 | [7] | PhotocentricUV DLP HardwhitePhrozenShuffle, Shuffle Lite5012548 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id 6FD997990D8DD8B39608E9CA50E53C68 | ||
| Photocentric | UV DLP High Tensile | grey | 50 | 16 | 5 | 64 | [7] | PhotocentricUV DLP High TensilegreyPhrozenShuffle, Shuffle Lite5016564 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:14, 15 March 2022. poll-id F2D65D99D86048573C6D0E8ACE06C288 | ||
| Photocentric | UV DLP Poliglass | 50 | 30 | 5 | 120 | [7] | PhotocentricUV DLP PoliglassPhrozenShuffle, Shuffle Lite50305120 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id 23463450792AE2CC505C3EDD0980A4D8 | |||
| Photocentric | UV DLP Tough | grey | 50 | 15 | 5 | 60 | [7] | PhotocentricUV DLP ToughgreyPhrozenShuffle, Shuffle Lite5015560 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id 29C1C4E2159496AB1B5FC89B1766B90B | ||
| Phrozen | ABS-Like | grey, white | 50 | 7 | 6 | 60 | 1 | [8][9] | PhrozenABS-Likegrey, whitePhrozenShuffle, Shuffle Lite5076601 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 0291A2874AFDB518BD6BF71C00373FEB | |
| Phrozen | Aqua | green, blue, grey 4K, ivory 4K | 50 | 7 | 6 | 60 | 1 | [8][9] | PhrozenAquagreen, blue, grey 4K, ivory 4KPhrozenShuffle, Shuffle Lite5076601 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 243812D367B0508EECDEC49D60A1BFDE | |
| Phrozen | Basic | beige | 50 | 11 | 6 | 60 | 3 | [8][9] | PhrozenBasicbeigePhrozenShuffle, Shuffle Lite50116603 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id FA518B6E3F962F7933B9C67DC76CE8D0 | |
| Phrozen | Flex | beige | flexible | 50 | 9 | 6 | 60 | 2 | [8][9] | PhrozenFlexbeigePhrozenShuffle, Shuffle Lite5096602 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id DA142DA958E198AD6758E5C232535B9A |
| Phrozen | Low-Irritation | beige | 50 | 15 | 6 | 50 | 3 | [8][9] | PhrozenLow-IrritationbeigePhrozenShuffle, Shuffle Lite50156503 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 10EBCCB0D360238079AC94CDFA252059 | |
| Phrozen | Nylon Tough | translucent green | 50 | 9 | 6 | 60 | 2 | [8][9] | PhrozenNylon Toughtranslucent greenPhrozenShuffle, Shuffle Lite5096602 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id FD1CC288B39FADA11BA0BA94FF67CFBF | |
| Phrozen | Rock Stiff | black | 50 | 9 | 6 | 60 | 1 | [8][9] | PhrozenRock StiffblackPhrozenShuffle, Shuffle Lite5096601 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id D07739DE12897092D21FC0FA78C68E97 | |
| Phrozen | SC-801 | clear | 50 | 14 | 6 | 60 | 1 | [8][9] | PhrozenSC-801clearPhrozenShuffle, Shuffle Lite50146601 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 85E57116747E66ED6B4DCFA31C215F72 | |
| Phrozen | TR250 | deep grey | high temp | 50 | 11 | 6 | 60 | 3 | [8][9] | PhrozenTR250deep greyPhrozenShuffle, Shuffle Lite50116603 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 9E67DFC1B9FEC1673EE591452CA6847F |
| Phrozen | TR250LV | grey | high temp | 50 | 7 | 6 | 60 | 1 | [8][9] | PhrozenTR250LVgreyPhrozenShuffle, Shuffle Lite5076601 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 78D6489C87849B396F0EACFDAA92FDF1 |
| Phrozen | TR300 Ultra-High Temp | grey | high temp | 50 | 7 | 6 | 30 | 2 | [8][9] | PhrozenTR300 Ultra-High TempgreyPhrozenShuffle, Shuffle Lite5076302 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 0ECF3BCCA1D7B040F0BC3AE588EF6DF4 |
| Phrozen | Water-Washable | black | water washable | 50 | 9 | 6 | 60 | 1 | [8][9] | PhrozenWater-WashableblackPhrozenShuffle, Shuffle Lite5096601 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id C85FF5DF79B0D4E969E86079BBA23CF0 |
| Phrozen | Water-Washable | grey | water washable | 50 | 7 | 6 | 60 | 1 | [8][9] | PhrozenWater-WashablegreyPhrozenShuffle, Shuffle Lite5076601 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 5A69590EF11DCCAEE5AD9A3F9590C14F |
| Phrozen | Wax-Like | green | castable | 50 | 10 | 6 | 60 | 3 | [8][9] | PhrozenWax-LikegreenPhrozenShuffle, Shuffle Lite50106603 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 2715D496A10F12385E9E62AC211D686F |
| Phrozen | Wax-Like | violet | castable | 50 | 15 | 6 | 60 | 5 | [8][9] | PhrozenWax-LikevioletPhrozenShuffle, Shuffle Lite50156605 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 6DFAA83C0B3C8FE1731D199D3A0F29B2 |
| Power Resins | Burn | castable, dental | 50 | 15 | 5 | 85 | [10] | Power ResinsBurnPhrozenShuffle, Shuffle Lite5015585 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id 8967F3A1A01A1A5A637F704E5AF0C614 | ||
| Power Resins | Dark | castable | 50 | 18 | 8 | 110 | [10] | Power ResinsDarkPhrozenShuffle, Shuffle Lite50188110 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id E423DAFF0B0B9F94DFEAEE4151BEE7B8 | ||
| Power Resins | Model | castable, dental | 50 | 18 | 8 | 110 | [10] | Power ResinsModelPhrozenShuffle, Shuffle Lite50188110 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id F1E2BA16CC8B1E2DFEEC11106F4D9252 | ||
| Power Resins | Opaque | castable | 50 | 15 | 5 | 85 | [10] | Power ResinsOpaquePhrozenShuffle, Shuffle Lite5015585 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id B0D9EE774687E419B40970EA6BAABFB7 | ||
| Power Resins | Temp | castable, dental | 50 | 18 | 8 | 110 | [10] | Power ResinsTempPhrozenShuffle, Shuffle Lite50188110 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id 05F3C50907968B2D4A53F9B640CC5770 | ||
| Power Resins | Zero | castable | 50 | 12 | 5 | 70 | [10] | Power ResinsZeroPhrozenShuffle, Shuffle Lite5012570 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id DEB7AB437D718B4FE801534E416D74B7 |
How to use the spreadsheet (Step-by-step)
1. Find the resin you'd like to use
You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes.
If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.
2. Check the source
The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations.
3. Copy the parameters into your slicer
The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.)
Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model.
4. Print a test file for validation
This is a crucial step, and one you shouldn't skip. Every printer is slightly different, and the settings that work on one unit might not work the same on another.
As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.
You should always start out with a small test file to check if the settings work before launching a larger print.
5. Inspect the test file
If the print looks good, you can go ahead and use the settings as they are.
If you see any imperfections, (such as lack of detail, brittleness, discoloration etc.) adjust the settings according to the resin validation guide.
6. Help out others
If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.)
If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters.
You can help even more by adding other compatible resins with the Add new settings button.
Other important factors
There are some factors that greatly influence your printing success no matter what material you choose.
1. Maintain adequate temperature
You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.
2. Shake your resin
Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.
You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.
3. Check your expiration date
Keep away from direct sunlight. Store in a cool, dry place. Do not exceed expiration date. Use soon after opening.
What's true for most of your food cupboard is true for resins as well.
While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.
Resin settings explained
If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.
These 3D printers by Phrozen use an open material system. This means they can use any brand of resin, not just the ones sold by Phrozen.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems.
For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
- Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly.
- μm: 1 micron or 0.001 milimeters.
- Normal exposure time: The amount of time each normal layer will be cured for.
- Number of base layers: At the start of the print, you must cure a few layers for a longer time. This helps the model stick to the build plate.
- Base layer exposure time: The amount of time each base layer will be cured for.
- Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.
Community tips
If you have a tip related to Phrozen Shuffle & Shuffle Lite resin settings, tell others about it below.
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 "Download". BlueCast.
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 "Exposure times of DruckWege Type D UV Resins on the Elegoo Mars 2 Pro". DruckWege.
- ↑ 3.0 3.1 3.2 3.3 3.4 "Printing parameters". Enlighten Materials.
- ↑ "Universal SLA/DLP 3D Printer Resin Settings". Google Sheets.
- ↑ "Universal SLA/DLP 3D Printer Resin Settings Spreadsheet". Reddit.
- ↑ 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 "Compatible 3D-printers with Liqcreate resins". Liqcreate.
- ↑ 7.00 7.01 7.02 7.03 7.04 7.05 7.06 7.07 7.08 7.09 7.10 7.11 7.12 "Support UV Resins". Photocentric.
- ↑ 8.00 8.01 8.02 8.03 8.04 8.05 8.06 8.07 8.08 8.09 8.10 8.11 8.12 8.13 8.14 "Phrozen Resin Profile". Google Sheets.
- ↑ 9.00 9.01 9.02 9.03 9.04 9.05 9.06 9.07 9.08 9.09 9.10 9.11 9.12 9.13 9.14 "Resin Profile – Phrozen Technology". Phrozen3D.com.
- ↑ 10.0 10.1 10.2 10.3 10.4 10.5 "Printer Settings". powerresins.
Advertisement:
Enable comment auto-refresher