ELEGOO Mars Pro resin settings
Below you can find a list of resins which are compatible with the ELEGOO Mars Pro.
The Mars Pro is an open material 3D printer, meaning it can print with any brand of resin, not just the ones made by ELEGOO. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them.
You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.
ELEGOO Mars Pro resin settings spreadsheet
The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.
The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.
| Resin brand | Resin name | Resin color | Resin type | At layer height (μm) | Exp. time (s) | Base layer count | Base exp. time (s) | Light off time (s) | Ref | Confirm |
|---|---|---|---|---|---|---|---|---|---|---|
| 3DMaterials | SuperFast | black, amber | 50 | 2.8 | 20 | [1] | 3DMaterialsSuperFastblack, amberELEGOOMars Pro502.820 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id F7E2E3E3424B8CA1CA790ED570BF0626 | |||
| 3DMaterials | SuperFast | clear | 50 | 3.8 | 20 | [1] | 3DMaterialsSuperFastclearELEGOOMars Pro503.820 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 34AEDE0BA070BA104B4068CBE5371E0A | |||
| 3DMaterials | SuperFast | light grey | 50 | 3.2 | 30 | [1] | 3DMaterialsSuperFastlight greyELEGOOMars Pro503.230 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 008599F2C210572FB970F10A8874EB58 | |||
| 3DMaterials | SuperFast | white | 50 | 4 | 20 | [1] | 3DMaterialsSuperFastwhiteELEGOOMars Pro50420 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 73415D23B07003D4CA2814324AC8B160 | |||
| 3DMaterials | SuperFlex | flexible | 50 | 4.7 | 20 | [1] | 3DMaterialsSuperFlexELEGOOMars Pro504.720 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 4B102ABC86987431FAECF45BB50FBECD | |||
| 3DMaterials | SuperHDT | high temp | 50 | 28 | 20 | [1] | 3DMaterialsSuperHDTELEGOOMars Pro502820 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id CD2441757663213A852BA6B5D31930CF | |||
| 3DMaterials | SuperPP | 50 | 9 | 20 | [1] | 3DMaterialsSuperPPELEGOOMars Pro50920 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 89C0C4F3DD9E338655578C5FDF8F52A3 | ||||
| Ameralabs | AMD-3 LED | black | 50 | 3.2 | 4 | 50 | 11.5 | [2] | AmeralabsAMD-3 LEDblackELEGOOMars Pro503.245011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id A655BA81A4F05E142A438AA70DF918CA | |
| Ameralabs | AMD-3 LED | grey | 50 | 4 | 4 | 60 | 11.5 | [2] | AmeralabsAMD-3 LEDgreyELEGOOMars Pro50446011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id 0D3AFC770C39B9D5FBAF51418F26611C | |
| Ameralabs | DMD-21 LED | sand | dental | 50 | 4 | 4 | 70 | 11.5 | [2] | AmeralabsDMD-21 LEDsandELEGOOMars Pro50447011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id 4DB2E8F302461127ECEF0C03CD184100 |
| Ameralabs | TGM-7 LED | grey | 50 | 5 | 4 | 80 | 11.5 | [2] | AmeralabsTGM-7 LEDgreyELEGOOMars Pro50548011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id DD1D0EEFEDB257A19DF74D1B212DE5BE | |
| BlueCast | CR3A | castable | 40 | 7 | 80 | 10 | 8 | [3] | BlueCastCR3AELEGOOMars Pro40780108 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id EB5FA8E94D4977B74D5D357AB8F1F4C5 | |
| BlueCast | Dental | grey, beige | castable, dental | 40 | 7 | 60 | 9 | 9 | [3] | BlueCastDentalgrey, beigeELEGOOMars Pro4076099 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 7951C9FDC7CA1B3A6555E545727B18A8 |
| BlueCast | Model HR | 40 | 7 | 90 | 10 | 9 | [3] | BlueCastModel HRELEGOOMars Pro40790109 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id D036812DBF52F2DD30A80AA065CD3005 | ||
| BlueCast | Original | castable | 40 | 7 | 90 | 12 | 8 | [3] | BlueCastOriginalELEGOOMars Pro40790128 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 0CDB6E4867F6AD7C1EDC8B29743EE1F3 | |
| BlueCast | X-ONE | castable | 50 | 10 | 45 | 10 | 8 | [3] | BlueCastX-ONEELEGOOMars Pro501045108 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 41A10739D271A4B1FA9988C3878C2DB6 | |
| BlueCast | X10 | castable | 40 | 7 | 80 | 10 | 9 | [3] | BlueCastX10ELEGOOMars Pro40780109 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 1672681F1EF1C5D413F8CC7DCA40575A | |
| BlueCast | X5 | castable | 40 | 7 | 90 | 11 | 8 | [3] | BlueCastX5ELEGOOMars Pro40790118 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 76F302C5AA25B5C615720DDC64F371F7 | |
| DruckWege | Type D Pro | 50 | 6.5 | 8 | 20 | [4] | DruckWegeType D ProELEGOOMars Pro506.5820 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:13, 7 March 2022. poll-id E3B4816028F916C1B8E79CF5D808111C | |||
| ELEGOO | ABS-Like | black, maroon | 50 | 10 | 45 | [5][6] | ELEGOOABS-Likeblack, maroonELEGOOMars Pro501045 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id BF67C4A721849D09BC395FDAD0A82CD6 | |||
| ELEGOO | ABS-Like | grey, white, red, green, clear blue, blue, yellow, beige, mint green | 50 | 7 | 45 | [5][6] | ELEGOOABS-Likegrey, white, red, green, clear blue, blue, yellow, beige, mint greenELEGOOMars Pro50745 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id E75F3E02A4EEFA4A6BFE9503AFDF4DBD | |||
| ELEGOO | ABS-Like | smoky black | 50 | 8 | 45 | [5][6] | ELEGOOABS-Likesmoky blackELEGOOMars Pro50845 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 5DD0C7E41BDC0ED4BCDDA89FF3C58CE8 | |||
| ELEGOO | ABS-Like | translucent | 50 | 12 | 50 | [5][6] | ELEGOOABS-LiketranslucentELEGOOMars Pro501250 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 4306A55EB640ECD2E2268609F3DDA467 | |||
| ELEGOO | Plant-Based | black, translucent | 50 | 10 | 45 | [5][6] | ELEGOOPlant-Basedblack, translucentELEGOOMars Pro501045 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 7197B0C05ECAB6DA2776CA9E9CF8C965 | |||
| ELEGOO | Plant-Based | grey, white, green | 50 | 7 | 45 | [5][6] | ELEGOOPlant-Basedgrey, white, greenELEGOOMars Pro50745 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 660027023C929C1B9043698EFDBDADA2 | |||
| ELEGOO | Standard | black, maroon | 50 | 10 | 45 | [5][6] | ELEGOOStandardblack, maroonELEGOOMars Pro501045 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 8D566166BF67244276A1842F3D3A01CA | |||
| ELEGOO | Standard | grey, white, red, green, clear blue, blue, yellow, beige | 50 | 7 | 45 | [5][6] | ELEGOOStandardgrey, white, red, green, clear blue, blue, yellow, beigeELEGOOMars Pro50745 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 4849EC31BF3AE6B3C4557D75585DAA90 | |||
| ELEGOO | Standard | translucent | 50 | 12 | 50 | [5][6] | ELEGOOStandardtranslucentELEGOOMars Pro501250 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 29712F8DFA3ABDE4F2FBEC3541C56A74 | |||
| ELEGOO | Water Washable | black | water washable | 50 | 10 | 45 | [5][6] | ELEGOOWater WashableblackELEGOOMars Pro501045 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 06019EF74DEDF366D8D47A22D3C30F85 | ||
| ELEGOO | Water Washable | ceramic grey, white, red, green, clear blue, yellow, beige, mint green | water washable | 50 | 7 | 45 | [5][6] | ELEGOOWater Washableceramic grey, white, red, green, clear blue, yellow, beige, mint greenELEGOOMars Pro50745 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id B09281A7767BC2DA1E8C5C07FC80B3FC | ||
| ELEGOO | Water Washable | smoky black | water washable | 50 | 8 | 45 | [5][6] | ELEGOOWater Washablesmoky blackELEGOOMars Pro50845 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id BA9E3628197F22C928EA505B43F79ED4 | ||
| JAMG HE | Conjure Rigid | 50 | 12 | 5 | 60 | [7][8] | JAMG HEConjure RigidELEGOOMars Pro5012560 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:39, 7 March 2022. poll-id 13A67D1FCEA352B97F197B2C64A9140E | |||
| JAMG HE | Conjure Sculpt | 50 | 12 | 5 | 60 | [7][8] | JAMG HEConjure SculptELEGOOMars Pro5012560 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:39, 7 March 2022. poll-id 72A9B591F4826C83D7AD537E738E3D8E | |||
| JAMG HE | Conjure Tough | 50 | 12 | 5 | 60 | [7][8] | JAMG HEConjure ToughELEGOOMars Pro5012560 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:39, 7 March 2022. poll-id 507548E4B5178234489C61C152748492 | |||
| Power Resins | Burn | castable, dental | 50 | 12 | 8 | 85 | 0 | [9] | Power ResinsBurnELEGOOMars Pro50128850 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 5F6B80C3DF3CD73A7DF3DF05D2793F49 | |
| Power Resins | Dark | castable | 50 | 18 | 25 | 115 | 0 | [9] | Power ResinsDarkELEGOOMars Pro5018251150 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id CCC05D4C2AB86D72DA5A2B40C2E0B18A | |
| Power Resins | Model | castable, dental | 50 | 18 | 25 | 115 | 0 | [9] | Power ResinsModelELEGOOMars Pro5018251150 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id C6B2E2CBE5B5942AA1913A62F66F81D3 | |
| Power Resins | Opaque | castable | 50 | 12 | 8 | 85 | 0 | [9] | Power ResinsOpaqueELEGOOMars Pro50128850 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 7DC1244B486908A8FD8020AEE772927E | |
| Power Resins | Temp | castable, dental | 50 | 18 | 30 | 115 | 0 | [9] | Power ResinsTempELEGOOMars Pro5018301150 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 62339BFA8899133A8572B8CE40ECAB95 | |
| Power Resins | Wax | castable | 50 | 12 | 8 | 90 | 0 | [9] | Power ResinsWaxELEGOOMars Pro50128900 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 77FF961FD7DE21826F259C3675FC1622 | |
| Power Resins | Zero | castable | 50 | 18 | 25 | 115 | 0 | [9] | Power ResinsZeroELEGOOMars Pro5018251150 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 83147110C1383729ED64D08E70C6F7B7 | |
| Resione | C01 | 50 | 12.7 | 3 | 60 | 0 | [10] | ResioneC01ELEGOOMars Pro5012.73600 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id D0D4D1F102EFE258A636EE2D5BC88DE1 | ||
| Resione | D01 | 50 | 11 | 3 | 55 | 0.5 | [10] | ResioneD01ELEGOOMars Pro50113550.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 9FEA9BAFF20325A8A069ADC5D5231723 | ||
| Resione | D01S | 50 | 11.9 | 3 | 50 | 0.5 | [10] | ResioneD01SELEGOOMars Pro5011.93500.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 23A3D177B1B0D5D8B439CB24D50F5751 | ||
| Resione | F39-F39T | 100 | 8.5 | 3 | 45 | 0.5 | [10] | ResioneF39-F39TELEGOOMars Pro1008.53450.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 7261794502B579E08086E079EC015693 | ||
| Resione | F69-F80 Black | 50 | 10.2 | 3 | 50 | 0.5 | [10] | ResioneF69-F80 BlackELEGOOMars Pro5010.23500.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 5886DEECA7C90D35BB2F407A09F0DB30 | ||
| Resione | F80 Gum | 50 | 8.5 | 3 | 45 | 1 | [10] | ResioneF80 GumELEGOOMars Pro508.53451 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id E77D6C8F64F4F97E80615AFD9438BE0A | ||
| Resione | G217-HT100 | 50 | 11.9 | 3 | 45 | 0.5 | [10] | ResioneG217-HT100ELEGOOMars Pro5011.93450.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 264EE7FB7A2A7075AA95975BA42E2F1C | ||
| Resione | K | 50 | 8.5 | 3 | 45 | 0 | [10] | ResioneKELEGOOMars Pro508.53450 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 1B101C85A431DA556F3F78725BB32465 | ||
| Resione | M58 | 50 | 7.3 | 3 | 40 | 0 | [10] | ResioneM58ELEGOOMars Pro507.33400 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 06FE93EE9E5E0767AAEF38512240471E | ||
| Resione | M68-EC51 | 50 | 6.8 | 3 | 40 | 0 | [10] | ResioneM68-EC51ELEGOOMars Pro506.83400 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id C68F3ACC843D6B676C2529DD961D1D05 | ||
| Resione | M70 | 50 | 10.2 | 3 | 75 | 1 | [10] | ResioneM70ELEGOOMars Pro5010.23751 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id DB6C03A007082810785ECD5155EA6B4B | ||
| Resione | MS100 | 50 | 9.4 | 3 | 45 | 0 | [10] | ResioneMS100ELEGOOMars Pro509.43450 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id F52689B4FBCB52B8FEAD7392F9D82727 | ||
| Resione | PB81 | 50 | 9.4 | 3 | 35 | 0 | [10] | ResionePB81ELEGOOMars Pro509.43350 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 7DCE2AA607343EE492FA25BB0632BDE5 | ||
| Resione | W90B | clear, white, blue | 50 | 6 | 3 | 35 | 0 | [10] | ResioneW90Bclear, white, blueELEGOOMars Pro5063350 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 8C7916AC0B10378C9E22F7A02265BC01 | |
| Resione | W90B | orange, grey, black | 50 | 6.4 | 3 | 40 | 0 | [10] | ResioneW90Borange, grey, blackELEGOOMars Pro506.43400 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id EBC1B8C08078C48EBF5C4AC593B3821D | |
| Siraya Tech | Build | 50 | 6.5 | 4 | 40 | [11] | Siraya TechBuildELEGOOMars Pro506.5440 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 4A35AC4B31750862F740802E75429D4B | |||
| Siraya Tech | Fast | navy grey | 50 | 10 | 5 | 60 | [11] | Siraya TechFastnavy greyELEGOOMars Pro5010560 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id B621792CB9EAB1C73CEDCC4CD66F8CA1 | ||
| Siraya Tech | Fast | 50 | 7 | 5 | 45 | [11] | Siraya TechFastELEGOOMars Pro507545 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 9208358AA35D9A2CB273A210EA7A46C6 |
How to use the spreadsheet (Step-by-step)
1. Find the resin you'd like to use
You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes.
If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.
2. Check the source
The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations.
3. Copy the parameters into your slicer
The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.)
Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model.
4. Print a test file for validation
This is a crucial step, and one you shouldn't skip. Every printer is slightly different, and the settings that work on one unit might not work the same on another.
As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.
You should always start out with a small test file to check if the settings work before launching a larger print.
5. Inspect the test file
If the print looks good, you can go ahead and use the settings as they are.
If you see any imperfections, (such as lack of detail, brittleness, discoloration etc.) adjust the settings according to the resin validation guide.
6. Help out others
If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.)
If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters.
You can help even more by adding other compatible resins with the Add new settings button.
Other important factors
There are some factors that greatly influence your printing success no matter what material you choose.
1. Maintain adequate temperature
You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.
2. Shake your resin
Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.
You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.
3. Check your expiration date
Keep away from direct sunlight. Store in a cool, dry place. Do not exceed expiration date. Use soon after opening.
What's true for most of your food cupboard is true for resins as well.
While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.
Resin settings explained
If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.
The ELEGOO Mars Pro is an open type of 3D printer. This means it can use any brand of resin, not just the ones sold by ELEGOO.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems.
For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
- Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly.
- μm: 1 micron or 0.001 milimeters.
- Normal exposure time: The amount of time each normal layer will be cured for.
- Number of base layers: At the start of the print, you must cure a few layers for a longer time. This helps the model stick to the build plate.
- Base layer exposure time: The amount of time each base layer will be cured for.
- Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.
Community tips
If you have a tip related to ELEGOO Mars Pro resin settings, tell others about it below.
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 "3D Printing Resins for LCD, DLP". 3DMaterials.
- ↑ 2.0 2.1 2.2 2.3 "3D Printing Settings". AmeraLabs.
- ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 "Download". BlueCast.
- ↑ "Exposure times of DruckWege Type D UV Resins on the Elegoo Mars 2 Pro". DruckWege.
- ↑ 5.00 5.01 5.02 5.03 5.04 5.05 5.06 5.07 5.08 5.09 5.10 5.11 "ELEGOO resin settings on mars & mars pro & Mars 2 & Mars 3 and saturn(official)". Google Sheets.
- ↑ 6.00 6.01 6.02 6.03 6.04 6.05 6.06 6.07 6.08 6.09 6.10 6.11 "ELEGOO Printers Resin Setting Sheet". ELEGOO.com.
- ↑ 7.0 7.1 7.2 "Conjure resin profile 20210912". Google Sheets.
- ↑ 8.0 8.1 8.2 "JAMG HE Conjure Rigid Resin". ChiTu Systems!.
- ↑ 9.0 9.1 9.2 9.3 9.4 9.5 9.6 "Printer Settings". powerresins.
- ↑ 10.00 10.01 10.02 10.03 10.04 10.05 10.06 10.07 10.08 10.09 10.10 10.11 10.12 10.13 10.14 "Settings". RESIONE.
- ↑ 11.0 11.1 11.2 "support". Siraya Tech.
Enable comment auto-refresher