Anycubic Photon S resin settings
Below you can find a list of resins which are compatible with the Anycubic Photon S.
The Photon S is an open material 3D printer, meaning it can print with any brand of resin, not just the ones made by Anycubic. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them.
You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.
Anycubic Photon S resin settings spreadsheet
The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.
The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.
| Resin brand | Resin name | Resin color | Resin type | At layer height (μm) | Exp. time (s) | Base layer count | Base exp. time (s) | Light off time (s) | Ref | Confirm |
|---|---|---|---|---|---|---|---|---|---|---|
| Ameralabs | AMD-3 LED | black | 50 | 4.8 | 4 | 80 | 1 | [1] | AmeralabsAMD-3 LEDblackAnycubicPhoton S504.84801 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id 11A7D4E1AE5ACBE5D7160941936476A7 | |
| Ameralabs | AMD-3 LED | grey | 50 | 6 | 4 | 90 | 1 | [1] | AmeralabsAMD-3 LEDgreyAnycubicPhoton S5064901 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id 26094AB2F07273BF59365D0FD1BF149A | |
| Ameralabs | DMD-21 LED | sand | dental | 50 | 6 | 4 | 90 | 1 | [1] | AmeralabsDMD-21 LEDsandAnycubicPhoton S5064901 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id E0981B1B93AED6D9F8417317B6D5F3E9 |
| Ameralabs | TGM-7 LED | grey | 50 | 8 | 4 | 120 | 1 | [1] | AmeralabsTGM-7 LEDgreyAnycubicPhoton S50841201 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:09, 7 March 2022. poll-id AF999C45224037BB92F4DA29B26C375E | |
| Anycubic | Basic | black | 50 | 8 | 8 | 80 | 2 | [2][3] | AnycubicBasicblackAnycubicPhoton S5088802 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id C232DBA14CF62C524B0365C41BE6F051 | |
| Anycubic | Basic | clear | 50 | 7.5 | 3 | 60 | 1.3 | [2][3] | AnycubicBasicclearAnycubicPhoton S507.53601.3 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 4F072C40698F5B2E0E279DC196B3EC33 | |
| Anycubic | Basic | green | 50 | 5 | 3 | 40 | 0 | [2][3] | AnycubicBasicgreenAnycubicPhoton S5053400 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id C61A01AB0016663C13F77D1D527B3859 | |
| Anycubic | Basic | grey | 50 | 8 | 3 | 60 | 1 | [2][3] | AnycubicBasicgreyAnycubicPhoton S5083601 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id D6841DCFC7C642383F4789EFB0988627 | |
| Anycubic | Basic | maroon | 20 | 4 | 10 | 65 | 1 | [2][3] | AnycubicBasicmaroonAnycubicPhoton S20410651 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 4042B5CE86E0F42C3206CACA4A270063 | |
| Anycubic | Basic | orange | 100 | 7.6 | 6 | 65 | 6.5 | [2][3] | AnycubicBasicorangeAnycubicPhoton S1007.66656.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id DF62693449BD58A53009F76C3089306F | |
| Anycubic | Basic | translucent green | 50 | 8 | 6 | 60 | 3 | [2][3] | AnycubicBasictranslucent greenAnycubicPhoton S5086603 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id E5ECF3E8F6A33CFB47F3F0D2308DF512 | |
| Anycubic | Basic | white | 50 | 10 | 10 | 60 | 2 | [2][3] | AnycubicBasicwhiteAnycubicPhoton S501010602 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 45852BAC698E1B6F7D1ACBEC2C110217 | |
| Anycubic | Basic | 50 | 6 | 6 | 30 | 1 | [4] | AnycubicBasicAnycubicPhoton S5066301 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 59AC97CAFA5B662DE409EC71B61EE3D2 | ||
| Anycubic | Dental Castable | green | castable, dental | 30 | 12 | 5 | 90 | 6.5 | [2][3] | AnycubicDental CastablegreenAnycubicPhoton S30125906.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 6D1A89811ED77427EA0340C999CB004D |
| Anycubic | Dental Castable | dental, castable | 50 | 6 | 6 | 30 | 1 | [4] | AnycubicDental CastableAnycubicPhoton S5066301 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 93A4E7E6F1561D91C048776ED3B0C492 | |
| Anycubic | Eco | pink | 50 | 8 | 6 | 60 | 0 | [2][3] | AnycubicEcopinkAnycubicPhoton S5086600 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 1740B7E305E80F439ABF97D156C012C6 | |
| Anycubic | Flexible Tough | flexible | 50 | 6 | 6 | 30 | 1 | [4] | AnycubicFlexible ToughAnycubicPhoton S5066301 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 3542F6A1523CC267FCA85E2196E8304D | |
| Anycubic | Plant-Based | 50 | 6 | 6 | 30 | 1 | [4] | AnycubicPlant-BasedAnycubicPhoton S5066301 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id D8FE48E5A42A1681AE1F028A0560BF7B | ||
| BlueCast | CR3A | castable | 50 | 7 | 60 | 7 | 8 | [5] | BlueCastCR3AAnycubicPhoton S5076078 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 7FAEF4F1FB640052F655CFFC5501B01A | |
| BlueCast | Dental | grey, beige | castable, dental | 50 | 7 | 70 | 9 | 8 | [5] | BlueCastDentalgrey, beigeAnycubicPhoton S5077098 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 9ABF7B4C802973CAF5C81BA16B00C15E |
| BlueCast | Model HR | 50 | 7 | 70 | 10 | 8 | [5] | BlueCastModel HRAnycubicPhoton S50770108 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 7C91072E21505D8F90D3B53D9D97BF16 | ||
| BlueCast | Original | castable | 50 | 7 | 70 | 10 | 8 | [5] | BlueCastOriginalAnycubicPhoton S50770108 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 7656811988F6EB9182AC6F1874098AC9 | |
| BlueCast | X-ONE | castable | 50 | 7 | 70 | 10 | 8 | [5] | BlueCastX-ONEAnycubicPhoton S50770108 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 202A06C8AE5E034E6D63ACF2C52C85CD | |
| BlueCast | X10 | castable | 50 | 7 | 60 | 7 | 8 | [5] | BlueCastX10AnycubicPhoton S5076078 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id F9878FA0EC9987C5AE7A9EA103211F75 | |
| BlueCast | X5 | castable | 50 | 7 | 70 | 8 | 8 | [5] | BlueCastX5AnycubicPhoton S5077088 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id AB73EFFA50F47DAE45CEFB4831AD60EE | |
| ELEGOO | ABS-Like | grey | 50 | 6 | 6 | 60 | 6.5 | [2][3] | ELEGOOABS-LikegreyAnycubicPhoton S5066606.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 1E44E29680CD78FF61AD7A4EBA8EB038 | |
| ELEGOO | ABS-Like | red, translucent | 50 | 9 | 4 | 70 | 1 | [2][3] | ELEGOOABS-Likered, translucentAnycubicPhoton S5094701 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id B3F25FDA1123AC93AE52344B2DE28845 | |
| ELEGOO | Standard | black | 50 | 8 | 3 | 60 | 1 | [2][3] | ELEGOOStandardblackAnycubicPhoton S5083601 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id EED3150E495454E35A94A1E799946E82 | |
| ELEGOO | black | 50 | 9 | 4 | 70 | 0 | [2][3] | ELEGOOblackAnycubicPhoton S5094700 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 56D7A8B5EC27444E5C97E63DFC29D5A5 | ||
| IFUN | High Toughness | grey | 50 | 8 | 7 | 35 | 1 | [2][3] | IFUNHigh ToughnessgreyAnycubicPhoton S5087351 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id B94C67E173F978D48874BF65E4B21257 | |
| iFUN | Standard #3120 | grey | 50 | 8 | 7 | 35 | 2 | [2][3] | iFUNStandard #3120greyAnycubicPhoton S5087352 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 05D0548C205A1E4A5797A6535A85643A | |
| Liqcreate | Deep Blue | blue | 50 | 22 | 8 | 60 | 2 | [6] | LiqcreateDeep BlueblueAnycubicPhoton S50228602 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 42FA2FACEAE9C1E812C546E159A5B78D | |
| Liqcreate | Premium Black | black | 50 | 13 | 2 | 150 | 2 | [6] | LiqcreatePremium BlackblackAnycubicPhoton S501321502 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 1ECE2CFA21EAF58A1456099226611715 | |
| Liqcreate | Premium White | white | 50 | 13 | 8 | 50 | 2 | [6] | LiqcreatePremium WhitewhiteAnycubicPhoton S50138502 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id D5D4A25682CC2B65AC0697796174D539 | |
| Liqcreate | Stone Coal Black | black | 50 | 27 | 3 | 170 | 2 | [6] | LiqcreateStone Coal BlackblackAnycubicPhoton S502731702 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 179753C17A13F422C090AA552AEF1EC1 | |
| Monocure | Flex100 Rapid | transparent | flexible | 50 | 14 | 10 | 90 | 6.5 | [2][3] | MonocureFlex100 RapidtransparentAnycubicPhoton S501410906.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 26E947E0AB649B33194AA91B073B273E |
| Monocure | Flex100 Rapid | flexible | 50 | 8 | 4 | 40 | [7] | MonocureFlex100 RapidAnycubicPhoton S508440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 43FC311600DD3E681134E2B2245EA4BA | ||
| Monocure | Model Rapid | 50 | 6 | 4 | 40 | [7] | MonocureModel RapidAnycubicPhoton S506440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id BF40C96C92E8AC70E9D9498618D0C107 | |||
| Monocure | Porcelene Dental (R) | dental | 50 | 6 | 4 | 40 | [7] | MonocurePorcelene Dental (R)AnycubicPhoton S506440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 03E35C6C9526DFF98151D143F1794D32 | ||
| Monocure | Pro Crystal Clear | clear | 50 | 6.5 | 4 | 40 | [7] | MonocurePro Crystal ClearclearAnycubicPhoton S506.5440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id DD4A9008943C854E56B902865FBF160D | ||
| Monocure | Pro Deep Black | black | 50 | 6 | 4 | 40 | [7] | MonocurePro Deep BlackblackAnycubicPhoton S506440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id BFF1E727D0BD0C35309ACE1BDCEF1829 | ||
| Monocure | Pro Glow In The Dark | glow in the dark | 50 | 6.5 | 4 | 40 | [7] | MonocurePro Glow In The DarkAnycubicPhoton S506.5440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 1AB8743DFD8919893115541F01796FC6 | ||
| Monocure | Rapid | clear | 50 | 13 | 5 | 50 | 3 | [2][3] | MonocureRapidclearAnycubicPhoton S50135503 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 7F3D93E86695294CA02D8317F4E9AE8B | |
| Monocure | Rapid | grey | 50 | 10 | 3 | 60 | 1 | [2][3] | MonocureRapidgreyAnycubicPhoton S50103601 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id C86ED06C3D7A324F6C120942F542455C | |
| Monocure | Tuff Rapid | 50 | 6 | 4 | 40 | [7] | MonocureTuff RapidAnycubicPhoton S506440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 62FE88B72D64E215567826171A2103AB | |||
| NextDent | Cast | red | castable | 50 | 8 | 6 | 60 | 8 | [2][3] | NextDentCastredAnycubicPhoton S5086608 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 15 March 2022. poll-id 9B4EC77568FE9B61A308786B7D8911A7 |
| ProLab Materials | Dental Model LCD/DLP | dark grey | dental | 50 | 9 | 6 | 90 | 0.1 | [2][3] | ProLab MaterialsDental Model LCD/DLPdark greyAnycubicPhoton S5096900.1 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id E89B0BA39DABD33D9DC2A2F616328B66 |
| ProLab Materials | Dental Model LCD/DLP | yellow sand | dental | 50 | 8 | 6 | 70 | 0.1 | [2][3] | ProLab MaterialsDental Model LCD/DLPyellow sandAnycubicPhoton S5086700.1 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 16B49792B27A1031D14980F7C7807C26 |
| Senertek | Cast v1 | red | castable, dental | 50 | 5.6 | 6 | 60 | 1 | [2][3] | SenertekCast v1redAnycubicPhoton S505.66601 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id A4826A280B02A0444E81F8060278FC52 |
| Senertek | Cast v1.5 | red | castable | 50 | 10 | 10 | 60 | 1 | [2][3] | SenertekCast v1.5redAnycubicPhoton S501010601 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 7840D12328A8F39B7B62D318CF128929 |
| Senertek | Cast v2 | red | castable | 30 | 8 | 6 | 60 | 1 | [2][3] | SenertekCast v2redAnycubicPhoton S3086601 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 60E9165A9616957344BF02861ABA0D8C |
| Senertek | Dental IBT | clear | dental | 50 | 8.5 | 6 | 60 | 1 | [2][3] | SenertekDental IBTclearAnycubicPhoton S508.56601 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id AC5DC4682A6FEA5F25B0B28B60048196 |
| Senertek | Dental Surgical Guide | clear | dental | 50 | 10 | 6 | 60 | 1 | [2][3] | SenertekDental Surgical GuideclearAnycubicPhoton S50106601 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 006C5847B6063BEC7B6A234CB34817E1 |
| Senertek | Model | grey, white, skin | 50 | 4.2 | 6 | 60 | 1 | [2][3] | SenertekModelgrey, white, skinAnycubicPhoton S504.26601 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id ADF8FDA7EC6F6968A60A4B0CF1730D41 | |
| Yller | Cosmos Castable | purple | castable | 25 | 0.4 | 8 | 80 | 1 | [2][3] | YllerCosmos CastablepurpleAnycubicPhoton S250.48801 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 1DD8AAF4B9DBBF8736A42720FE82AE9E |
| Yller | Cosmos Model | grey | 100 | 8 | 4 | 50 | 1 | [2][3] | YllerCosmos ModelgreyAnycubicPhoton S10084501 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 6E89996BE1CB63FF5261E2DD69EFF0AA | |
| Siraya Tech | Blu | emerald blue, clear v2 | 50 | 11 | 6 | 75 | [8] | Siraya TechBluemerald blue, clear v2AnycubicPhoton S5011675 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id EE6230FE526991057FA30D09234DE439 | ||
| Siraya Tech | Blu | obsidian black | 50 | 7.5 | 4 | 50 | [8] | Siraya TechBluobsidian blackAnycubicPhoton S507.5450 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id C046604447817F00E2BE46317EE8C5E0 | ||
| Siraya Tech | Build | 50 | 9.5 | 5 | 65 | [8] | Siraya TechBuildAnycubicPhoton S509.5565 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id BC3888E934AC4D68D58CBC7868D7B8AF | |||
| Siraya Tech | Cast | castable | 50 | 12 | 5 | 65 | [8] | Siraya TechCastAnycubicPhoton S5012565 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id A842FDAAC5DD98B4E632A727C736E322 | ||
| Siraya Tech | Easy | 50 | 12 | 6 | 90 | [8] | Siraya TechEasyAnycubicPhoton S5012690 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id C9941BD713FB5BB7672AAFBC835CA81D | |||
| Siraya Tech | Fast | navy grey | 50 | 10 | 5 | 75 | [8] | Siraya TechFastnavy greyAnycubicPhoton S5010575 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 5262AAA2E297644BB0D740B2EFF03B41 |
How to use the spreadsheet (Step-by-step)
1. Find the resin you'd like to use
You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes.
If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.
2. Check the source
The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations.
3. Copy the parameters into your slicer
The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.)
Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model.
4. Print a test file for validation
This is a crucial step, and one you shouldn't skip. Every printer is slightly different, and the settings that work on one unit might not work the same on another.
As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.
You should always start out with a small test file to check if the settings work before launching a larger print.
5. Inspect the test file
If the print looks good, you can go ahead and use the settings as they are.
If you see any imperfections, (such as lack of detail, brittleness, discoloration etc.) adjust the settings according to the resin validation guide.
6. Help out others
If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.)
If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters.
You can help even more by adding other compatible resins with the Add new settings button.
Other important factors
There are some factors that greatly influence your printing success no matter what material you choose.
1. Maintain adequate temperature
You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.
2. Shake your resin
Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.
You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.
3. Check your expiration date
Keep away from direct sunlight. Store in a cool, dry place. Do not exceed expiration date. Use soon after opening.
What's true for most of your food cupboard is true for resins as well.
While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.
Resin settings explained
If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.
The Anycubic Photon S is an open type of 3D printer. This means it can use any brand of resin, not just the ones sold by Anycubic.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems.
For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
- Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly.
- μm: 1 micron or 0.001 milimeters.
- Normal exposure time: The amount of time each normal layer will be cured for.
- Number of base layers: At the start of the print, you must cure a few layers for a longer time. This helps the model stick to the build plate.
- Base layer exposure time: The amount of time each base layer will be cured for.
- Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.
Community tips
If you have a tip related to Anycubic Photon S resin settings, tell others about it below.
- ↑ 1.0 1.1 1.2 1.3 "3D Printing Settings". AmeraLabs.
- ↑ 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 2.22 2.23 2.24 2.25 2.26 2.27 2.28 2.29 "Anycubic Photon S Resin Settings". Google Sheets.
- ↑ 3.00 3.01 3.02 3.03 3.04 3.05 3.06 3.07 3.08 3.09 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23 3.24 3.25 3.26 3.27 3.28 3.29 "The Resin Printing Resource Guide - Beginners, start here! : AnycubicPhoton". Reddit.
- ↑ 4.0 4.1 4.2 4.3 "All You Need to Know about Anycubic Resin Settings". Anycubic.
- ↑ 5.0 5.1 5.2 5.3 5.4 5.5 5.6 "Download". BlueCast.
- ↑ 6.0 6.1 6.2 6.3 "Compatible 3D-printers with Liqcreate resins". Liqcreate.
- ↑ 7.0 7.1 7.2 7.3 7.4 7.5 7.6 "Printer Settings". Monocure 3D.
- ↑ 8.0 8.1 8.2 8.3 8.4 8.5 "support". Siraya Tech.
Enable comment auto-refresher