Anycubic Photon Mono resin settings
Below you can find a list of resins which are compatible with the Anycubic Photon Mono.
The Photon Mono is an open material 3D printer, meaning it can print with any brand of resin, not just the ones made by Anycubic. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them.
You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.
Anycubic Photon Mono resin settings spreadsheet
The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.
The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.
Resin brand | Resin name | Resin color | Resin type | At layer height (μm) | Exp. time (s) | Base layer count | Base exp. time (s) | Light off time (s) | Ref | Confirm |
---|---|---|---|---|---|---|---|---|---|---|
3D Resin Solutions | HARD Rapid ABS | 50 | 3 | 10 | 35 | 1 | [1] | 3D Resin SolutionsHARD Rapid ABSAnycubicPhoton Mono50310351 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 89898156CD7CBBC03BBAC799E905A56D | ||
3D Resin Solutions | HERO Evolution | 50 | 4 | 10 | 45 | 1 | [1] | 3D Resin SolutionsHERO EvolutionAnycubicPhoton Mono50410451 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id C8598DCFA816E3FFDF76E9F527FE2430 | ||
3D Resin Solutions | HERO Tough | 50 | 4.5 | 10 | 50 | 1 | [1] | 3D Resin SolutionsHERO ToughAnycubicPhoton Mono504.510501 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id BA06F411E1F7E3CF11FDC5B3A6E4DFAB | ||
3D Resin Solutions | Standard V2 | 50 | 3.5 | 10 | 40 | 1 | [1] | 3D Resin SolutionsStandard V2AnycubicPhoton Mono503.510401 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 7FD9C804AC833B6B0B955CEE4BB47D2E | ||
3D Resin Solutions | Studio Fabrication | 50 | 3.5 | 10 | 40 | 1 | [1] | 3D Resin SolutionsStudio FabricationAnycubicPhoton Mono503.510401 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 83541E91853552245AC80996D38980AF | ||
3DMaterials | SuperFast | black | 50 | 0.8 | 5 | [2] | 3DMaterialsSuperFastblackAnycubicPhoton Mono500.85 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id 78DB12CEE5FF2F23CBAFB4EB67FDA522 | |||
3DMaterials | SuperFast | clear | 50 | 0.7 | 5 | [2] | 3DMaterialsSuperFastclearAnycubicPhoton Mono500.75 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id 673467DC5608605CEF3476BA06BBFE33 | |||
3DMaterials | SuperFast | light grey | 50 | 0.6 | 5 | [3][4] | 3DMaterialsSuperFastlight greyAnycubicPhoton Mono500.65 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id F507067144E03FF594C11EDD0788AE65 | |||
3DMaterials | SuperFast | white, amber | 50 | 0.7 | 5 | [2] | 3DMaterialsSuperFastwhite, amberAnycubicPhoton Mono500.75 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id DFDEA0AC0CBD20A7427783B270CAF0EF | |||
3DMaterials | SuperFlex | clear | flexible | 50 | 1.7 | 5 | [3] | 3DMaterialsSuperFlexclearAnycubicPhoton Mono501.75 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id 276B8F9C178148701B94C6ABC66D0955 | ||
3DMaterials | SuperHDT | clear | high temp | 50 | 4 | 10 | [3] | 3DMaterialsSuperHDTclearAnycubicPhoton Mono50410 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id 38DA11309EBFF7DE6528A88BD6AA9639 | ||
3DMaterials | SuperPP | clear | 50 | 1.3 | 5 | [3] | 3DMaterialsSuperPPclearAnycubicPhoton Mono501.35 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id 91954609F61B1ABE4A51E47622BF0718 | |||
Anycubic | Basic | black | 50 | 2 | 3 | 20 | 0.5 | [4] | AnycubicBasicblackAnycubicPhoton Mono5023200.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 0ED6AA4C74F1271BF5F17DAECAC7D9A4 | |
Anycubic | Basic | clear | 50 | 2 | 6 | 45 | 0.2 | [4] | AnycubicBasicclearAnycubicPhoton Mono5026450.2 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 64175E046C7AEE43C045ED4D60D3F689 | |
Anycubic | Basic | grey | 50 | 2 | 6 | 30 | 0.2 | [4] | AnycubicBasicgreyAnycubicPhoton Mono5026300.2 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id A7633B02688C0449FDBF2FBFA0F7C5FC | |
Anycubic | Basic | 50 | 2 | 6 | 40 | 0.5 | [4] | AnycubicBasicAnycubicPhoton Mono5026400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 161EBB063457DD53EFEDF5402084DA29 | ||
Anycubic | Dental Castable | dental, castable | 50 | 2 | 6 | 40 | 0.5 | [5] | AnycubicDental CastableAnycubicPhoton Mono5026400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id FA5FFC97EF519F1036CF9FD9974CE75D | |
Anycubic | Flexible Tough | flexible | 50 | 2 | 6 | 40 | 1 | [5] | AnycubicFlexible ToughAnycubicPhoton Mono5026401 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 5C5BD397240D67782C54648188EB94AD | |
Anycubic | Plant-Based | 50 | 2 | 6 | 40 | 0.5 | [5] | AnycubicPlant-BasedAnycubicPhoton Mono5026400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 2EA9C1EBDA36B424FBC5C8860D015D1F | ||
Anycubic | Resinway | grey | 50 | 2 | 6 | 35 | 0.5 | [4] | AnycubicResinwaygreyAnycubicPhoton Mono5026350.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 0231B515A16DF66047B92B5359B66735 | |
BlueCast | CR3A | castable | 30 | 10 | 50 | 2.4 | 7 | [6] | BlueCastCR3AAnycubicPhoton Mono3010502.47 You must log in to vote 1 0 There was one vote since the poll was created on 11:39, 7 March 2022. poll-id F855B6C384DC93461F87EF5696623A69 | |
BlueCast | Dental | grey, beige | castable, dental | 30 | 10 | 50 | 3.6 | 7 | [6] | BlueCastDentalgrey, beigeAnycubicPhoton Mono3010503.67 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id 84DE0A053F8F88AF60E338A588505B85 |
BlueCast | Model HR | 30 | 10 | 50 | 4.2 | 7 | [6] | BlueCastModel HRAnycubicPhoton Mono3010504.27 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id 18B1429D6E9788E111C09E8646BCF290 | ||
BlueCast | Original | castable | 30 | 10 | 60 | 3.4 | 7 | [6] | BlueCastOriginalAnycubicPhoton Mono3010603.47 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id 9549FA2400B8DDC5E56FA9EF2BB221A8 | |
BlueCast | X-ONE | castable | 50 | 15 | 25 | 7 | 7 | [6] | BlueCastX-ONEAnycubicPhoton Mono50152577 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id 2407B8AB87E87955A2248C5E92C949B5 | |
BlueCast | X10 | castable | 30 | 10 | 60 | 2.7 | 7 | [6] | BlueCastX10AnycubicPhoton Mono3010602.77 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id E7B4899871CA11A06DE71B94E520464A | |
BlueCast | X5 | castable | 30 | 10 | 60 | 2 | 7 | [6] | BlueCastX5AnycubicPhoton Mono30106027 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id 68DA9F1441F2773141B7D32BD8E2BBAE | |
ELEGOO | ABS-Like | 50 | 1.8 | 10 | 35 | 1 | [4] | ELEGOOABS-LikeAnycubicPhoton Mono501.810351 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id FF55E2A5F331611C3EA522DB758E02BB | ||
ELEGOO | Water Washable | green | water washable | 50 | 2 | 6 | 30 | 0.5 | [4] | ELEGOOWater WashablegreenAnycubicPhoton Mono5026300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id 922A096BCD094DF15C8903ED75F51E99 |
ELEGOO | Water Washable | grey | water washable | 50 | 2 | 6 | 20 | 0.5 | [4] | ELEGOOWater WashablegreyAnycubicPhoton Mono5026200.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id 7E229A46FC8249DFF83E417642B209F9 |
eSUN | Hard-Tough | black | 50 | 2 | 6 | 20 | 0.5 | [4] | eSUNHard-ToughblackAnycubicPhoton Mono5026450.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 7 March 2022. poll-id 4FF01AB176816644D338D7C7FBC0DF49 | |
FormFutura | Flex 63A | flexible | 50 | 3 | 2 | 45 | 3 | [7] | FormFuturaFlex 63AAnycubicPhoton Mono5032453 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:51, 7 March 2022. poll-id 9C899F07B973D9A6EEB2B43C2B84AD6A | |
JAMG HE | Conjure Rigid | 50 | 4.5 | 5 | 25 | [8][9] | JAMG HEConjure RigidAnycubicPhoton Mono504.5525 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:39, 7 March 2022. poll-id EFF25246663B2B68D639DA40F068800D | |||
JAMG HE | Conjure Sculpt | 50 | 4.5 | 5 | 25 | [8][9] | JAMG HEConjure SculptAnycubicPhoton Mono504.5525 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:39, 7 March 2022. poll-id 4F0E83885DA544D1AB4CE81A958A60E3 | |||
JAMG HE | Conjure Tough | 50 | 4.5 | 5 | 25 | [8][9] | JAMG HEConjure ToughAnycubicPhoton Mono504.5525 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:39, 7 March 2022. poll-id 3C1F07A02BE84E05EB9DFA9C0991A219 | |||
Liqcreate | Clear Impact | clear | 50 | 7 | 2 | 60 | 1 | [10] | LiqcreateClear ImpactclearAnycubicPhoton Mono5072601 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 1337DEBC294412683BF54CDED4AB64FB | |
Liqcreate | Composite-X | 50 | 7 | 2 | 70 | 1 | [10] | LiqcreateComposite-XAnycubicPhoton Mono5072701 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id EEFBEE5EF029807757845D1393963717 | ||
Liqcreate | Deep Blue | blue | 50 | 4 | 2 | 50 | 1 | [10] | LiqcreateDeep BlueblueAnycubicPhoton Mono5042501 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id CC6EA9D194B0DD5B6D5568F500328FDA | |
Liqcreate | Dental Model Pro | beige | dental | 50 | 4 | 2 | 40 | 1 | [10] | LiqcreateDental Model ProbeigeAnycubicPhoton Mono5042401 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id FD2B917030C47AA550A77CA2880C7416 |
Liqcreate | Dental Model Pro | grey | dental | 50 | 4 | 2 | 50 | 1 | [10] | LiqcreateDental Model ProgreyAnycubicPhoton Mono5042501 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 1CFA05EF7DC16D68C39DBF5A7FC11373 |
Liqcreate | Flexible-X | flexible | 100 | 15 | 2 | 80 | 1 | [10] | LiqcreateFlexible-XAnycubicPhoton Mono100152801 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 2246307C635C56BA2BA8C02A814A097B | |
Liqcreate | Gingiva Mask | dental | 100 | 14 | 2 | 30 | 1 | [10] | LiqcreateGingiva MaskAnycubicPhoton Mono100142301 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id ADF234B37C23AF5823F9430FCCA85DD3 | |
Liqcreate | Hazard Glow | glow in the dark | 100 | 7 | 2 | 70 | 1 | [10] | LiqcreateHazard GlowAnycubicPhoton Mono10072701 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id ADB4E03440A6D71E8F6BFC95EB35A0AD | |
Liqcreate | Premium Black | black | 50 | 3.5 | 3 | 50 | 1 | [10] | LiqcreatePremium BlackblackAnycubicPhoton Mono503.53501 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 79A53B78E8CB9E281D8FF35070D17694 | |
Liqcreate | Premium Flex | flexible | 50 | 3.5 | 1 | 40 | 1 | [10] | LiqcreatePremium FlexAnycubicPhoton Mono503.51401 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 57D63BAE4E567E7343FC28473B633AE4 | |
Liqcreate | Premium Model | 50 | 1.7 | 2 | 50 | 1 | [10] | LiqcreatePremium ModelAnycubicPhoton Mono501.72501 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id F2E84EA9A19087EB47CA26D2A02636A3 | ||
Liqcreate | Premium Tough | 100 | 6.7 | 1 | 50 | 1 | [10] | LiqcreatePremium ToughAnycubicPhoton Mono1006.71501 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id D601CFAE6D78834C6DBAF142172AFEAE | ||
Liqcreate | Premium White | white | 50 | 1.8 | 2 | 50 | 1 | [10] | LiqcreatePremium WhitewhiteAnycubicPhoton Mono501.82501 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id EE687F619A8807328AF6CE51BB63D5AA | |
Liqcreate | Stone Coal Black | black | 50 | 4 | 2 | 50 | 1 | [10] | LiqcreateStone Coal BlackblackAnycubicPhoton Mono5042501 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id A39AAB97B07400A792E94B635355D0CE | |
Liqcreate | Strong-X | 50 | 5 | 3 | 70 | 1 | [10] | LiqcreateStrong-XAnycubicPhoton Mono5053701 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 54F6E35236A3572F66F00F36F20E0AB8 | ||
Liqcreate | Tough-X | 50 | 12 | 2 | 60 | 1 | [10] | LiqcreateTough-XAnycubicPhoton Mono50122601 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 4E71C1BF14ABD3607C09A0FD77E187DF | ||
Liqcreate | Wax Castable | castable | 50 | 3 | 2 | 50 | 1 | [10] | LiqcreateWax CastableAnycubicPhoton Mono5032501 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id C3287131EA64D987E87FFF983559012D | |
Monocure | Rapid | clear | 50 | 1.4 | 30 | [3][4] | MonocureRapidclearAnycubicPhoton Mono501.430 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:28, 14 March 2022. poll-id F6E3CBD635631BB19813BBC4FDDC8C45 | |||
Monocure | Rapid | grey | 50 | 1.6 | 30 | [3][4] | MonocureRapidgreyAnycubicPhoton Mono501.630 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:28, 14 March 2022. poll-id F1B3F52A2C689487E22C246EF9CBEAE5 | |||
Nova3D | Washable | black | water washable | 50 | 2 | 4 | 30 | 0.5 | [4] | Nova3DWashableblackAnycubicPhoton Mono5024300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:51, 8 March 2022. poll-id E3CDB7B9748618D7BFC26097AB24ED2A |
Nova3D | Washable | grey | water washable | 50 | 2 | 6 | 40 | 0.5 | [4] | Nova3DWashablegreyAnycubicPhoton Mono5026400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:51, 8 March 2022. poll-id 9C308CF12188E71E2A85D15BE8BC3B5A |
Photocentric | UV DLP Flex | flexible | 50 | 6 | 4 | 40 | [11] | PhotocentricUV DLP FlexAnycubicPhoton Mono506440 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:05, 15 March 2022. poll-id 2C85504B4D0A65D440B8C1B5AA62DBEA | ||
Phrozen | aqua green | 30 | 1.2 | 6 | 20 | 1 | [4] | Phrozenaqua greenAnycubicPhoton Mono301.26201 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 7B2F2ADBDCD8C325056AC9A198BA77AF | ||
Resione | C01 | 50 | 3.3 | 3 | 60 | 0.5 | [12] | ResioneC01AnycubicPhoton Mono503.33600.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 4F20A743BD7E2F6FE8AE4110728792B6 | ||
Resione | D01 | 50 | 2.8 | 3 | 60 | 0.5 | [12] | ResioneD01AnycubicPhoton Mono502.83600.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id D3B24EB898C3A296AE514BBF45313E1F | ||
Resione | D01S | 50 | 3 | 3 | 50 | 0.5 | [12] | ResioneD01SAnycubicPhoton Mono5033500.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 0855A63F4DA1DA0CB93EF5188384AC63 | ||
Resione | F39-F39T | 100 | 2.2 | 3 | 45 | 1 | [12] | ResioneF39-F39TAnycubicPhoton Mono1002.23451 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 95501208AF4192FD34329FE41A6603E6 | ||
Resione | F69-F80 Black | 50 | 2.6 | 3 | 45 | 1 | [12] | ResioneF69-F80 BlackAnycubicPhoton Mono502.63451 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 78E6723345676EC15945305EA06E271F | ||
Resione | F80 Gum | 50 | 2.2 | 3 | 45 | 1 | [12] | ResioneF80 GumAnycubicPhoton Mono502.23451 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 1D362F2EF93AFF7E26FC905AA3D2FA6F | ||
Resione | G217-HT100 | 50 | 3 | 3 | 55 | 1 | [12] | ResioneG217-HT100AnycubicPhoton Mono5033551 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id DC4477250A455548A0ABE7D2CF85097B | ||
Resione | K | 50 | 2.2 | 3 | 45 | 0.5 | [12] | ResioneKAnycubicPhoton Mono502.23450.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id B7D57D6954851C88B60F75A30721460A | ||
Resione | M58 | 50 | 1.9 | 3 | 40 | 0.5 | [12] | ResioneM58AnycubicPhoton Mono501.93400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 849C329AAAF5EC79F78C0BC94A5A6481 | ||
Resione | M68-EC51 | 50 | 1.8 | 3 | 40 | 0.5 | [12] | ResioneM68-EC51AnycubicPhoton Mono501.83400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 80EC6CB47384145992EDDAAE2EEA3241 | ||
Resione | M70 | skin | 50 | 3 | 3 | 50 | 0 | [4] | ResioneM70AnycubicPhoton Mono5033500 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 199C12F2204F381365BB0A3C86EDE8D5 | |
Resione | MS100 | 50 | 2.4 | 3 | 40 | 0.5 | [12] | ResioneMS100AnycubicPhoton Mono502.43400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 35BED4AB8A526004CDF500AA11291562 | ||
Resione | PB81 | 50 | 2.4 | 3 | 40 | 0.5 | [12] | ResionePB81AnycubicPhoton Mono502.43400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id E33DAED0D9987FE85B72928A2E2100BC | ||
Resione | W90B | clear, white, blue | 50 | 1.6 | 3 | 40 | 0.5 | [12] | ResioneW90Bclear, white, blueAnycubicPhoton Mono501.63400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 0573CB3C50A019C979C1908C752E6E6C | |
Resione | W90B | orange, grey, black | 50 | 1.7 | 3 | 40 | 0.5 | [12] | ResioneW90Borange, grey, blackAnycubicPhoton Mono501.73400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id F244658FA55219F743D818AB3A496DB3 | |
Siraya Tech | Simple | smoky black | 50 | 1.8 | 30 | [3][4] | Siraya TechSimplesmoky blackAnycubicPhoton Mono501.830 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 1D50DF5639538242A5DE594DF4A544C1 | |||
eSUN | eResin-PLA Pro | 50 | 4.5 | 6 | 35 | [13] | eSUNeResin-PLA ProAnycubicPhoton Mono504.5635 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 9CB77FAE6E5F09AEA3AAA5B2C5AC0E23 | |||
Siraya Tech | Cast | castable | 50 | 3 | 5 | 30 | [14] | Siraya TechCastAnycubicPhoton Mono503530 You must log in to vote 0 0 There were 0 votes since the poll was created on 02:47, 30 March 2022. poll-id 220FC09C9A483F3F4D0D0A0A0DAAE083 | ||
Siraya Tech | Craft | glow in the dark | 50 | 2 | 5 | 25 | [14] | Siraya TechCraftAnycubicPhoton Mono502525 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:56, 29 March 2022. poll-id 2C7DCEBF0145F05B8EE116F31351E608 | ||
Siraya Tech | Fast | 50 | 1.6 | 5 | 20 | [14] | Siraya TechFastAnycubicPhoton Mono501.6520 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:23, 31 March 2022. poll-id 0C1B1DF052BA05C59752DE9293323A57 | |||
Siraya Tech | Fast | navy grey | 50 | 1.9 | 5 | 25 | [14] | Siraya TechFastnavy greyAnycubicPhoton Mono501.9525 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:56, 29 March 2022. poll-id 943DE5A87476B6E44855D011A4EA1074 | ||
Creality | Standard | grey | 50 | 2 | 6 | 28 | 0.5 | CrealityStandardgreyAnycubicPhoton Mono5026280.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:23, 15 May 2022. poll-id 0124175B1EE7F6A70A7676AD417AC3EC |
How to use the spreadsheet (Step-by-step)
1. Find the resin you'd like to use
You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes.
If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.
2. Check the source
The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations.
3. Copy the parameters into your slicer
The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.)
Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model.
4. Print a test file for validation
This is a crucial step, and one you shouldn't skip. Every printer is slightly different, and the settings that work on one unit might not work the same on another.
As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.
You should always start out with a small test file to check if the settings work before launching a larger print.
5. Inspect the test file
If the print looks good, you can go ahead and use the settings as they are.
If you see any imperfections, (such as lack of detail, brittleness, discoloration etc.) adjust the settings according to the resin validation guide.
6. Help out others
If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.)
If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters.
You can help even more by adding other compatible resins with the Add new settings button.
Other important factors
There are some factors that greatly influence your printing success no matter what material you choose.
1. Maintain adequate temperature
You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.
2. Shake your resin
Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.
You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.
3. Check your expiration date
Keep away from direct sunlight. Store in a cool, dry place. Do not exceed expiration date. Use soon after opening.
What's true for most of your food cupboard is true for resins as well.
While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.
Resin settings explained
If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.
The Anycubic Photon Mono is an open type of 3D printer. This means it can use any brand of resin, not just the ones sold by Anycubic.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems.
For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
- Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly.
- μm: 1 micron or 0.001 milimeters.
- Normal exposure time: The amount of time each normal layer will be cured for.
- Number of base layers: At the start of the print, you must cure a few layers for a longer time. This helps the model stick to the build plate.
- Base layer exposure time: The amount of time each base layer will be cured for.
- Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.
Community tips
If you have a tip related to Anycubic Photon Mono resin settings, tell others about it below.
- ↑ 1.0 1.1 1.2 1.3 1.4 "Exposure Settings". 3D Resin Solutions.
- ↑ 2.0 2.1 2.2 "3D Printing Resins for LCD, DLP". 3DMaterials.
- ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 "MSLA, DLP, and SLA Resin Print Settings". 4D Filtration.
- ↑ 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 4.16 "Anycubic Photon Mono - Resin Settings". Google Sheets.
- ↑ 5.0 5.1 5.2 "All You Need to Know about Anycubic Resin Settings". Anycubic.
- ↑ 6.0 6.1 6.2 6.3 6.4 6.5 6.6 "Download". BlueCast.
- ↑ "3D Printer resin". FormFutura.
- ↑ 8.0 8.1 8.2 "Conjure resin profile 20210912". Google Sheets.
- ↑ 9.0 9.1 9.2 "JAMG HE Conjure Rigid Resin". ChiTu Systems!.
- ↑ 10.00 10.01 10.02 10.03 10.04 10.05 10.06 10.07 10.08 10.09 10.10 10.11 10.12 10.13 10.14 10.15 10.16 "Compatible 3D-printers with Liqcreate resins". Liqcreate.
- ↑ "Support UV Resins". Photocentric.
- ↑ 12.00 12.01 12.02 12.03 12.04 12.05 12.06 12.07 12.08 12.09 12.10 12.11 12.12 12.13 "Settings". RESIONE.
- ↑ "3D Printing Settings". eSUN 3D Printing Materials.
- ↑ 14.0 14.1 14.2 14.3 "support". Siraya Tech.
Enable comment auto-refresher