Anycubic Photon Mono X resin settings
Below you can find a list of resins which are compatible with the Anycubic Photon Mono X.
The Photon Mono X is an open material 3D printer, meaning it can print with any brand of resin, not just the ones made by Anycubic. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them.
You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.
Anycubic Photon Mono X resin settings spreadsheet
The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.
The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.
Resin brand | Resin name | Resin color | Resin type | At layer height (μm) | Exp. time (s) | Base layer count | Base exp. time (s) | Light off time (s) | UV % | Ref | Confirm |
---|---|---|---|---|---|---|---|---|---|---|---|
3D Fila | Standard | grey | 50 | 1.7 | 6 | 50 | 1 | 80 | [1] | 3D FilaStandardgreyAnycubicPhoton Mono X501.76501 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 35148497F6F7B53CF2457A747402841B | |
3D Resin Solutions | BLUEprint | 50 | 4 | 2.5 | 20 | 0 | 70 | [2] | 3D Resin SolutionsBLUEprintAnycubicPhoton Mono X5042.5200 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:54, 6 March 2022. poll-id 183EF694A8449C6DAF6E74324366CC35 | ||
3D Resin Solutions | Fast+ | 40 | 4 | 2.3 | 40 | 0.5 | 70 | [2] | 3D Resin SolutionsFast+AnycubicPhoton Mono X4042.3400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 049EFED31A9EEF771BD19EF266371DFD | ||
3D Resin Solutions | Hard | 40 | 6 | 1.7 | 40 | 0.5 | 70 | [2] | 3D Resin SolutionsHardAnycubicPhoton Mono X4061.7400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:54, 6 March 2022. poll-id 3BBFD301A005A0F8678C8B2E276250B2 | ||
3D Resin Solutions | HARD Rapid ABS | 50 | 2.2 | 10 | 15 | 1 | 70 | [3] | 3D Resin SolutionsHARD Rapid ABSAnycubicPhoton Mono X502.210151 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 308A13A8BD7AC8A2DE135DA82E246844 | ||
3D Resin Solutions | Hero | 40 | 6 | 4 | 40 | 0 | 70 | [2] | 3D Resin SolutionsHeroAnycubicPhoton Mono X4064400 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:54, 6 March 2022. poll-id E918A896AAE70B6D393894CBDF98FC49 | ||
3D Resin Solutions | HERO Evolution | 50 | 3.5 | 10 | 20 | 1 | 70 | [3] | 3D Resin SolutionsHERO EvolutionAnycubicPhoton Mono X503.510201 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 77D0AB5317C8A9988D0C9668F15678B2 | ||
3D Resin Solutions | HERO Tough | 50 | 4.5 | 10 | 25 | 1 | 70 | [3] | 3D Resin SolutionsHERO ToughAnycubicPhoton Mono X504.510251 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 66D8975E02DAF54C9D2ABD6FBEB3E84E | ||
3D Resin Solutions | Standard | grey | 50 | 2.5 | 4 | 30 | 0 | 70 | [2] | 3D Resin SolutionsStandardgreyAnycubicPhoton Mono X502.54300 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:54, 6 March 2022. poll-id 5CD7E6AF847BA80C114E05948100C7C1 | |
3D Resin Solutions | Standard V2 | 50 | 3 | 10 | 15 | 1 | 70 | [3] | 3D Resin SolutionsStandard V2AnycubicPhoton Mono X50310151 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 82B5D9A9088B14DFBC27D592AD3F5F8F | ||
3D Resin Solutions | Studio Fabrication | 50 | 2.7 | 10 | 15 | 1 | 70 | [3] | 3D Resin SolutionsStudio FabricationAnycubicPhoton Mono X502.710151 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id ED3136D0C4237FCBDB1108F420506E50 | ||
3DJake | Color Mix | clear | colorable | 50 | 4 | 6 | 40 | 0.5 | 80 | [1] | 3DJakeColor MixclearAnycubicPhoton Mono X5046400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id E3FF51285B8EA1A948AE40BBC57E423D |
3DJake | Color Mix | transparent yellow | colorable | 50 | 4 | 5 | 50 | 1 | 80 | [1] | 3DJakeColor Mixtransparent yellowAnycubicPhoton Mono X5045501 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id F3C667C327511C9E57775C167BB42D03 |
3DJake | Standard | white | 50 | 2 | 8 | 35 | 1 | 80 | [1] | 3DJakeStandardwhiteAnycubicPhoton Mono X5028351 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 97A105C88902C6166913E773C23938C2 | |
3DMaterials | SuperFast | amber | 50 | 0.8 | 10 | 50 | [4] | 3DMaterialsSuperFastamberAnycubicPhoton Mono X500.810 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id A223FC9189F5932CFAD434505E6ABA51 | |||
3DMaterials | SuperFast | clear, black, white | 50 | 1.4 | 10 | 50 | [4] | 3DMaterialsSuperFastclear, black, whiteAnycubicPhoton Mono X501.410 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id 99109DE59A8111B228E2812473171D5C | |||
3DMaterials | SuperFast | light grey | 50 | 1.2 | 10 | 50 | [4] | 3DMaterialsSuperFastlight greyAnycubicPhoton Mono X501.210 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id E423BC54B607B6100E0841400F5C2D35 | |||
3DMaterials | SuperFlex | flexible | 50 | 1.5 | 10 | 50 | [4] | 3DMaterialsSuperFlexAnycubicPhoton Mono X501.510 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id 9D96F4EFE0CBFF0E69679B27DBA920C7 | |||
3DMaterials | SuperHDT | high temp | 50 | 5 | 10 | 50 | [4] | 3DMaterialsSuperHDTAnycubicPhoton Mono X50510 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id D396D5FC741C266FAD377AEE6CF825F6 | |||
3DMaterials | SuperPP | 50 | 1.8 | 10 | 50 | [4] | 3DMaterialsSuperPPAnycubicPhoton Mono X501.810 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id 5E60E8539934F4EF964E05E8837D0405 | ||||
3DMaterials | Water Washable | grey | water washable | 40 | 1.4 | 5 | 12.5 | 0.5 | 50 | [1] | 3DMaterialsWater WashablegreyAnycubicPhoton Mono X401.4512.50.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:44, 16 March 2022. poll-id 6C3FF4A3D11E68E919380AC086530DA7 |
Ameralabs | AMD-3 LED | black | 50 | 1.4 | 4 | 30 | 1 | 75 | [5] | AmeralabsAMD-3 LEDblackAnycubicPhoton Mono X501.44301 You must log in to vote 0 0 There were 0 votes since the poll was created on 09:09, 7 March 2022. poll-id C150EF947766AD6B7E193332D7D5BEA5 | |
Ameralabs | AMD-3 LED | grey | 50 | 1.8 | 4 | 30 | 1 | 75 | [5] | AmeralabsAMD-3 LEDgreyAnycubicPhoton Mono X501.84301 You must log in to vote 0 0 There were 0 votes since the poll was created on 09:09, 7 March 2022. poll-id A140E118EB53511048CB94D83BE090E0 | |
Ameralabs | DMD-21 LED | sand | dental | 50 | 1.8 | 4 | 30 | 1 | 75 | [5] | AmeralabsDMD-21 LEDsandAnycubicPhoton Mono X501.84301 You must log in to vote 0 0 There were 0 votes since the poll was created on 09:09, 7 March 2022. poll-id 3C5AB0207462CD3221BBE86CD95745BB |
Ameralabs | TGM-7 LED | grey | 50 | 2.3 | 4 | 40 | 1 | 75 | [5] | AmeralabsTGM-7 LEDgreyAnycubicPhoton Mono X502.34401 You must log in to vote 0 0 There were 0 votes since the poll was created on 09:09, 7 March 2022. poll-id F797EF0342D0BFC245187EAD928EDD00 | |
Anycubic | ABS-Like | black | 50 | 1.6 | 40 | 80 | [1] | AnycubicABS-LikeblackAnycubicPhoton Mono X501.640 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 96EA5392B691B814CDC87F68789F08F7 | |||
Anycubic | ABS-Like | clear | 50 | 2 | 40 | 80 | [1] | AnycubicABS-LikeclearAnycubicPhoton Mono X50240 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 1F4643D2A4DCB1308A81CBF07659A12E | |||
Anycubic | ABS-Like | grey | 50 | 1.9 | 40 | 80 | [1] | AnycubicABS-LikegreyAnycubicPhoton Mono X501.940 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 9B5602E9141B879781FEE0AE23F0DFC0 | |||
Anycubic | ABS-Like | white | 50 | 1.8 | 20 | 80 | [1] | AnycubicABS-LikewhiteAnycubicPhoton Mono X501.820 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 214DF6E4934C792B50AE8241DAB7C723 | |||
Anycubic | Basic | aqua blue | 50 | 1.5 | 6 | 25 | 1 | 80 | [1] | AnycubicBasicaqua blueAnycubicPhoton Mono X501.56251 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 085BE926BA5CD37F07C89C0BFC344C01 | |
Anycubic | Basic | black | 50 | 1.6 | 6 | 30 | 1 | 80 | [1] | AnycubicBasicblackAnycubicPhoton Mono X501.66301 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id F8EC6CAA63329E39046DFD4084D5D24D | |
Anycubic | Basic | clear | 50 | 2 | 6 | 40 | 0.5 | 80 | [1] | AnycubicBasicclearAnycubicPhoton Mono X5026400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 0C32332DE440F0055055B5CD274F75C1 | |
Anycubic | Basic | grey | 50 | 1.9 | 5 | 40 | 1 | 80 | [1] | AnycubicBasicgreyAnycubicPhoton Mono X501.95401 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 97A2B0502776E4E4F95794651A95FABB | |
Anycubic | Basic | white | 50 | 1.8 | 5 | 20 | 1 | 80 | [1] | AnycubicBasicwhiteAnycubicPhoton Mono X501.85201 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 15FF3B50B048C11C58CC2A7F8478D61C | |
Anycubic | Basic | 50 | 2 | 6 | 40 | 0.5 | [6] | AnycubicBasicAnycubicPhoton Mono X5026400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 627216E2504E1A9C9E8125A8134F30B0 | |||
Anycubic | Dental Castable | dental, castable | 50 | 2 | 6 | 40 | 0.5 | [6] | AnycubicDental CastableAnycubicPhoton Mono X5026400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 701F49C23F13386B2F3927B1D9543012 | ||
Anycubic | Eco | grey | 50 | 2 | 6 | 45 | 1 | 80 | [1] | AnycubicEcogreyAnycubicPhoton Mono X5026451 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id A96891AF4C5835370A705A00828CFE91 | |
Anycubic | Eco | translucent green | 50 | 2.8 | 6 | 28 | 1 | 50 | [1] | AnycubicEcotranslucent greenAnycubicPhoton Mono X502.86281 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id B8A93F0516344854FB712DE0A8C6514F | |
Anycubic | Eco | white | 50 | 5 | 6 | 45 | 1.5 | 80 | [1] | AnycubicEcowhiteAnycubicPhoton Mono X5056451.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 1E9AA3BA0A1C88F884F7040E90633ECC | |
Anycubic | Flexible Tough | flexible | 50 | 2 | 6 | 40 | 1 | [6] | AnycubicFlexible ToughAnycubicPhoton Mono X5026401 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 1FD5C1BAAFC3BDA15C7FB38DC3F6E418 | ||
Anycubic | Plant-Based | grey | 50 | 2 | 45 | 80 | [1] | AnycubicPlant-BasedgreyAnycubicPhoton Mono X50245 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 8556802AEEF534D8113D1FB3B00DE3E2 | |||
Anycubic | Plant-Based | 50 | 2 | 6 | 40 | 0.5 | [6] | AnycubicPlant-BasedAnycubicPhoton Mono X5026400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:59, 17 March 2022. poll-id 68611DB68767BABEEB484FB49BFF3F46 | |||
JAMG HE | Water Washable | grey | water washable | 30 | 1.5 | 6 | 30 | 0.5 | 80 | [1] | AurarumWater WashablegreyAnycubicPhoton Mono X301.56300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id CCA2E4CA8DAA4BF5EEE7B9AE3A8B50F0 |
BlueCast | CR3A | castable | 30 | 10 | 50 | 2 | 7 | [7] | BlueCastCR3AAnycubicPhoton Mono X30105027 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id E9A7B63D86537B16F64889439AB405F6 | ||
BlueCast | Dental | grey, beige | castable, dental | 30 | 10 | 50 | 3 | 7 | [7] | BlueCastDentalgrey, beigeAnycubicPhoton Mono X30105037 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id 1CF670D1722EAAACE8DF260F36957522 | |
BlueCast | Model HR | 30 | 10 | 50 | 3.6 | 7 | [7] | BlueCastModel HRAnycubicPhoton Mono X3010503.67 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id B8573144318FBE400987B5DB81922B8F | |||
BlueCast | Original | castable | 30 | 10 | 50 | 2.6 | 7 | [7] | BlueCastOriginalAnycubicPhoton Mono X3010502.67 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id ED3DFD565DA8763106A1B41FFA5F01CD | ||
BlueCast | X-ONE | castable | 30 | 15 | 20 | 8.5 | 7 | [7] | BlueCastX-ONEAnycubicPhoton Mono X3015208.57 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id 97D8A2E5992E097DBD7E50D721662972 | ||
BlueCast | X10 | castable | 30 | 10 | 50 | 2.1 | 7 | [7] | BlueCastX10AnycubicPhoton Mono X3010502.17 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id 8F585442FCE8A20A35BEDBBFD889C7EC | ||
BlueCast | X5 | castable | 30 | 10 | 50 | 2.2 | 7 | [7] | BlueCastX5AnycubicPhoton Mono X3010502.27 You must log in to vote 0 0 There were 0 votes since the poll was created on 11:39, 7 March 2022. poll-id 5EF009AB540EFB1122B636A84339C795 | ||
Creality | grey | 50 | 1.2 | 6 | 40 | 0 | 80 | [1] | CrealitygreyAnycubicPhoton Mono X501.26400 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id F08637E0A1ED7E6A2A126F30869B7C41 | ||
Doumii | Water Washable | blue cobalt | water washable | 50 | 1.6 | 40 | 80 | [8] | DoumiiWater Washableblue cobaltAnycubicPhoton Mono X501.640 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 11C5A3C2B5AEF1EFDE4A73934A028067 | ||
ELEGOO | ABS-Like | blue, clear | 50 | 1.8 | 5 | 25 | 0.5 | 60 | [1] | ELEGOOABS-Likeblue, clearAnycubicPhoton Mono X501.85250.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id 2526033F6017700B3ED41D91340D5F04 | |
ELEGOO | ABS-Like | grey | 50 | 1.8 | 6 | 40 | 0.5 | 80 | [1] | ELEGOOABS-LikegreyAnycubicPhoton Mono X501.86400.5 You must log in to vote 1 0 There was one vote since the poll was created on 12:50, 18 March 2022. poll-id CEB291F576800D4A631435618C605483 | |
ELEGOO | ABS-Like | white | 50 | 1.4 | 6 | 18 | 0.1 | 80 | [1] | ELEGOOABS-LikewhiteAnycubicPhoton Mono X501.46180.1 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id 05E5F405333FB891747653F8DDBF7A7C | |
ELEGOO | Plant-Based | clear green | 50 | 1.5 | 6 | 60 | 1 | 80 | [1] | ELEGOOPlant-Basedclear greenAnycubicPhoton Mono X501.56601 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id A0AFD8C82EDE5DAF359A8A5EC2A57A10 | |
ELEGOO | Standard | black | 50 | 2 | 6 | 50 | 0.5 | 80 | [1] | ELEGOOStandardblackAnycubicPhoton Mono X5026500.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id C3DEF9922E6C9EA08B9ECAAA9466EAF7 | |
ELEGOO | Standard | grey | 50 | 2 | 8 | 23 | 1 | 80 | [1] | ELEGOOStandardgreyAnycubicPhoton Mono X5028231 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id 020F1066BDBF91D6253096FD4E23E41B | |
ELEGOO | Standard | maroon | 50 | 2 | 6 | 70 | 0.5 | 80 | [1] | ELEGOOStandardmaroonAnycubicPhoton Mono X5026700.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id FDE67CDCDC73D10CC7279178379742A7 | |
ELEGOO | Standard | skin | 50 | 1 | 3 | 22 | 2 | 100 | [1] | ELEGOOStandardskinAnycubicPhoton Mono X5013222 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id 303DAA01629E2E148D74BD0F05FE874D | |
ELEGOO | Water Washable | black | water washable | 50 | 3.6 | 8 | 45 | 1 | 85 | [1] | ELEGOOWater WashableblackAnycubicPhoton Mono X503.68451 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id 7D07262660F3BC3868FD8FEDCA8B1E9A |
ELEGOO | Water Washable | ceramic grey | water washable | 50 | 1.5 | 6 | 40 | 0.5 | 80 | [1] | ELEGOOWater Washableceramic greyAnycubicPhoton Mono X501.56400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id D4CCDE229B64ADACA08566D095C172FB |
ELEGOO | Water Washable | clear blue | water washable | 50 | 1.5 | 6 | 17 | 1 | 80 | [1] | ELEGOOWater Washableclear blueAnycubicPhoton Mono X501.56171 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id 22B4E151CCD6BE55901B733648633D60 |
ELEGOO | Water Washable | grey | water washable | 50 | 3.5 | 5 | 35 | 1 | 80 | [1] | ELEGOOWater WashablegreyAnycubicPhoton Mono X503.55351 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id 7D5353FBBC6D536C483FB066262E19A2 |
ELEGOO | Water Washable | white | water washable | 50 | 1.5 | 6 | 20 | 1 | 80 | [1] | ELEGOOWater WashablewhiteAnycubicPhoton Mono X501.56201 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:21, 16 May 2022. poll-id D2E41943706DE39A3AA20FCEDBF8A52B |
ELEGOO | Water Washable | transparent red | water washable | 50 | 1.5 | 6 | 20 | 1 | 50 | [1] | ELEGOOWater Washabletransparent redAnycubicPhoton Mono X501.56201 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:21, 16 May 2022. poll-id 377050B2786EDDDD2DDBF64F9B0CC8C6 |
ELEGOO | Water Washable | yellow | water washable | 50 | 1.5 | 6 | 20 | 0.5 | 80 | [1] | ELEGOOWater WashableyellowAnycubicPhoton Mono X501.56200.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:50, 18 March 2022. poll-id 753EDC966B8DF51B87B7373E3EAABD45 |
EPAX | Hard | grey | 50 | 2.5 | 8 | 24 | 1 | 80 | [1] | EPAXHardgreyAnycubicPhoton Mono X502.58241 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 18 March 2022. poll-id 392B34F45F96D0E2BA64C6D93CBBBA56 | |
eSUN | eResin-PLA | black | 50 | 2 | 4 | 25 | 0.5 | 60 | [1] | eSUNeResin-PLAblackAnycubicPhoton Mono X5024250.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 7 March 2022. poll-id FCD80394D53AE724FCD6D96F25C9151E | |
eSUN | eResin-PLA | clear | 50 | 1.8 | 6 | 30 | 0.2 | 30 | [1] | eSUNeResin-PLAclearAnycubicPhoton Mono X501.86300.2 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 7 March 2022. poll-id D70D00B61F2FBFABFCB752BDF8DAF89E | |
eSUN | eResin-PLA | grey | 50 | 2 | 6 | 40 | 0.5 | 100 | [1] | eSUNeResin-PLAgreyAnycubicPhoton Mono X5026400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 7 March 2022. poll-id FBE74A193E473FF85EF214DFA2F1567E | |
eSUN | eResin-PLA Pro | 50 | 3.2 | 6 | 38 | [9] | eSUNeResin-PLA ProAnycubicPhoton Mono X503.2638 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 7 March 2022. poll-id C106B0A3C015E16304DEA994E7EC41F0 | ||||
eSUN | Hard-Tough | blue | 50 | 1.7 | 10 | 33 | 0.5 | 80 | [1] | eSUNHard-ToughblueAnycubicPhoton Mono X501.710330.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 7 March 2022. poll-id 3A45555679C2A1D403C16E7B8CA413F1 | |
eSUN | Precision Model | beige | 50 | 2 | 6 | 20 | 0.5 | 80 | [1] | eSUNPrecision ModelbeigeAnycubicPhoton Mono X5026200.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 7 March 2022. poll-id 5EC6096D1121939FCB212571D9EF9F4E | |
eSUN | Standard | blue, sky | 50 | 2 | 4 | 15 | 1 | 80 | [1] | eSUNStandardblue, skyAnycubicPhoton Mono X5024151 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 7 March 2022. poll-id 39B4DBAE9446ACFAD20C22A3680722C8 | |
eSUN | Standard | white | 50 | 2 | 8 | 45 | 0.5 | 80 | [1] | eSUNStandardwhiteAnycubicPhoton Mono X5028450.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 7 March 2022. poll-id C4CB8A91F6D43E343DA1D08FD58D56FA | |
eSUN | Water Washable | translucent green | 50 | 2.6 | 6 | 30 | 50 | [1] | eSUNWater Washabletranslucent greenAnycubicPhoton Mono X502.6630 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:01, 7 March 2022. poll-id 3D35666AB5B102A9E138EFCD56B014CF | ||
FormFutura | Castable Wax | castable | 50 | 2.9 | 4 | 55 | 1.5 | 60 | [10] | FormFuturaCastable WaxAnycubicPhoton Mono X502.94551.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:51, 7 March 2022. poll-id 15D45075656556D59F82DD3F0241AC34 | |
FormFutura | Color Mix Standard | colorable | 50 | 3.5 | 10 | 45 | 1 | 80 | [10] | FormFuturaColor Mix StandardAnycubicPhoton Mono X503.510451 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:51, 7 March 2022. poll-id E79B11743780682A239BCD870A1D3076 | |
FormFutura | Color Mix Water Washable | colorable, water washable | 50 | 4 | 4 | 45 | 1 | 80 | [10] | FormFuturaColor Mix Water WashableAnycubicPhoton Mono X5044451 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:51, 7 March 2022. poll-id 7470AF428F7BE73E44E23876B7B6D43A | |
FormFutura | Flex 63A | flexible | 50 | 2.5 | 2 | 45 | 3 | 60 | [10] | FormFuturaFlex 63AAnycubicPhoton Mono X502.52453 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:51, 7 March 2022. poll-id B81192E1FF2E91D60FBA3525F9F56285 | |
FormFutura | Rigid Ceramic | 50 | 5.5 | 3 | 75 | 1 | 85 | [10] | FormFuturaRigid CeramicAnycubicPhoton Mono X505.53751 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:51, 7 March 2022. poll-id 4DB7C727C9F67DF4C9E49534204895BF | ||
Fungdo | ABS-Like | clear | 50 | 2 | 6 | 25 | 0.5 | 60 | [1] | FungdoABS-LikeclearAnycubicPhoton Mono X5026250.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 333A72B55FE4972E808EBE9DF82081AD | |
Fungdo | Standard | white | 50 | 2.2 | 6 | 33 | 1 | 77 | [1] | FungdoStandardwhiteAnycubicPhoton Mono X502.26331 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id F2A72FBF5B42135CACD04588DFF605DB | |
Liqcreate | Clear Impact | clear | 50 | 9 | 2 | 75 | 1 | 60 | [1] | LiqcreateClear ImpactclearAnycubicPhoton Mono X5092751 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 4CCEFB8B55CD9D2106E604C7D2B69625 | |
Liqcreate | Composite-X | white | 50 | 6.5 | 2 | 80 | 1 | 90 | [1] | LiqcreateComposite-XwhiteAnycubicPhoton Mono X506.52801 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 3A6195F89908AAABB0E49206F45FDBDF | |
Liqcreate | Deep Blue | blue | 50 | 5 | 2 | 75 | 1 | 100 | [1] | LiqcreateDeep BlueblueAnycubicPhoton Mono X5052751 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 7D23A2A002F35859519A2ECEFED8A48C | |
Liqcreate | Dental Model Pro | grey, beige | dental | 50 | 3.5 | 1 | 60 | 100 | [11] | LiqcreateDental Model Progrey, beigeAnycubicPhoton Mono X503.5160 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id AA466010FF6BCE73F19B68DBAF22F8BD | |
Liqcreate | Flexible-X | flexible | 100 | 13 | 2 | 75 | 100 | [11] | LiqcreateFlexible-XAnycubicPhoton Mono X10013275 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 145C540C9AF1A167BB8B051EA7481D12 | ||
Liqcreate | Gingiva Mask | dental | 100 | 14 | 6 | 30 | 100 | [11] | LiqcreateGingiva MaskAnycubicPhoton Mono X10014630 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id EC7E0712F0785D0CF853A10AD4B21EEA | ||
Liqcreate | Hazard Glow | green | glow-in-the-dark | 100 | 10 | 2 | 80 | 1 | 80 | [1] | LiqcreateHazard GlowgreenAnycubicPhoton Mono X100102801 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id F7A9FD0F1393E80733229BC11A3C8ADA |
Liqcreate | Premium Black | black | 50 | 1.7 | 2 | 75 | 100 | [11] | LiqcreatePremium BlackblackAnycubicPhoton Mono X501.7275 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id FFC466EBF8F0C835D2CA3625E3F9BC68 | ||
Liqcreate | Premium Flex | flexible | 100 | 6 | 1 | 75 | 60 | [11] | LiqcreatePremium FlexAnycubicPhoton Mono X1006175 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 76413B32F0CCC0BCA3F1287C52550D24 | ||
Liqcreate | Premium Model | peach | 50 | 2.5 | 1 | 35 | 1 | 60 | [1] | LiqcreatePremium ModelpeachAnycubicPhoton Mono X502.51351 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 34F6BBEDC6D933A3CC49336FEC6B844A | |
Liqcreate | Premium Model | 50 | 2.5 | 1 | 35 | 60 | [11] | LiqcreatePremium ModelAnycubicPhoton Mono X502.5135 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id B09D5CFC57C3F4C680EC2B8888715605 | |||
Liqcreate | Premium Tough | 100 | 9 | 2 | 50 | 65 | [11] | LiqcreatePremium ToughAnycubicPhoton Mono X1009250 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 7423DE97D0790CFF695C988DBAAC0017 | |||
Liqcreate | Premium White | white | 50 | 3 | 2 | 65 | 50 | [11] | LiqcreatePremium WhitewhiteAnycubicPhoton Mono X503265 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id C91AC4B641E69072670731C52DACAE76 | ||
Liqcreate | Stone Coal Black | black | 50 | 5 | 2 | 75 | 1 | 100 | [1] | LiqcreateStone Coal BlackblackAnycubicPhoton Mono X5052751 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id E75D693786BB9CCAEDB97AE2D0F3F739 | |
Liqcreate | Strong-X | grey | 50 | 5 | 2 | 60 | 1 | 100 | [1] | LiqcreateStrong-XgreyAnycubicPhoton Mono X5052601 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 4C77BB872757306C206BD32D0A72A999 | |
Liqcreate | Tough-X | black | 50 | 12 | 1 | 85 | 1 | 100 | [1] | LiqcreateTough-XblackAnycubicPhoton Mono X50121851 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 2ABE33C5CB6E077ADAD4A29945A24A2B | |
Liqcreate | Wax Castable | castable | 50 | 3 | 2 | 60 | 60 | [11] | LiqcreateWax CastableAnycubicPhoton Mono X503260 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:01, 13 March 2022. poll-id 12881603E0E0C0FCE368C37444F581AF | ||
Lodour | Transparent | red, ruby, amber | low odor | 50 | 3 | 4 | 20 | 0.5 | 80 | [1] | LodourTransparentred, ruby, amberAnycubicPhoton Mono X5034200.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 26FDF39CBED5C70B590A3DE38FB4AA8F |
Longer | Water Washable | black | water washable | 50 | 2.2 | 5 | 50 | 0.8 | 80 | [1] | LongerWater WashableblackAnycubicPhoton Mono X502.25500.8 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 1977A55485A4743D3F491BDDD2B9FA66 |
Longer | Water Washable | white | water washable | 50 | 1.5 | 6 | 30 | 0.5 | 70 | [1] | LongerWater WashablewhiteAnycubicPhoton Mono X501.56300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 2F1C5766A49220EA1A087DCDFF65CF6E |
Magma | High Detail, Low Odor | green, transparent | low odor | 50 | 1.5 | 6 | 20 | 1 | 80 | [1] | MagmaHigh Detail, Low Odorgreen, transparentAnycubicPhoton Mono X501.56201 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id A4CFF067AB5845F7C2939C85255B5969 |
Magma | High Detail, Low Odor | grey | low odor | 50 | 2 | 6 | 20 | 1 | 80 | [1] | MagmaHigh Detail, Low OdorgreyAnycubicPhoton Mono X5026201 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id CB6BB3D9FA19BE152295607CB49031C6 |
Monocure | Rapid | grey | 50 | 2.4 | 4 | 30 | 1 | 70 | [1] | MonocureRapidgreyAnycubicPhoton Mono X502.44301 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:28, 14 March 2022. poll-id FB41CFA15223B5D48B469DF21861FD01 | |
Monocure | Rapid | red | 50 | 1.6 | 6 | 35 | 0 | 80 | [1] | MonocureRapidredAnycubicPhoton Mono X501.66350 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:28, 14 March 2022. poll-id D21FE9057F429345171D883E22CEAC88 | |
Monoprice | Standard | black | 50 | 1.3 | 1 | 20 | 1 | 80 | [1] | MonopriceStandardblackAnycubicPhoton Mono X501.31201 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id C18AF28E9705F4544C4EA7F2017310BD | |
Nova3D | Nova Stan | black, grey, white | 50 | 1.3 | 20 | [1] | Nova3DNova Stanblack, grey, whiteAnycubicPhoton Mono X501.320 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:51, 8 March 2022. poll-id CBAD90852C4F1BE5CFABC0382CD1F178 | ||||
Nova3D | Nova Stan | clear blue | 50 | 1.6 | 6 | 40 | 0.5 | 100 | [1] | Nova3DNova Stanclear blueAnycubicPhoton Mono X501.66400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:51, 8 March 2022. poll-id 23A9223D1B1DA3D901514C1F390118F8 | |
Nova3D | Red Wax Like | red | 50 | 1.6 | 6 | 40 | 0.5 | 100 | [1] | Nova3DRed Wax LikeredAnycubicPhoton Mono X501.66400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:51, 8 March 2022. poll-id BAAB992059084F454938A4D80B313624 | |
Nova3D | Washable | grey | water washable | 50 | 2 | 6 | 20 | 0.5 | 65 | [1] | Nova3DWashablegreyAnycubicPhoton Mono X5026200.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:51, 8 March 2022. poll-id B3C2454F14C3E9F00635450B84ADD868 |
Phrozen | Aqua | grey 4K | 50 | 2.1 | 5 | 25 | 1 | 80 | [1] | PhrozenAquagrey 4KAnycubicPhoton Mono X502.15251 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 22253DFD142AA4AEB03C6903FEC9969C | |
Phrozen | Water Washable | black, grey | water washable | 50 | 1.9 | 7 | 40 | 1 | 80 | [1] | PhrozenWater Washableblack, greyAnycubicPhoton Mono X501.97401 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:18, 8 March 2022. poll-id 2A11DDD287E3A34E347D14E8A3C68C95 |
Power Resins | Burn | castable, dental | 50 | 4.5 | 8 | 80 | 0.5 | [12] | Power ResinsBurnAnycubicPhoton Mono X504.58800.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id EBB406B6DA8CEC4A308A436768C7286E | ||
Power Resins | Dark | castable | 50 | 7.5 | 8 | 125 | 0.5 | [12] | Power ResinsDarkAnycubicPhoton Mono X507.581250.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id 6732E413CBA0005B95112ED667976B19 | ||
Power Resins | Model | castable, dental | 50 | 7.5 | 8 | 125 | 0.5 | [12] | Power ResinsModelAnycubicPhoton Mono X507.581250.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id 597193D76356D56B2C48BDD51D67899A | ||
Power Resins | Opaque | castable | 50 | 4.5 | 8 | 80 | 0.5 | [12] | Power ResinsOpaqueAnycubicPhoton Mono X504.58800.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id DC7336DEFA6301A4AC3DE874AD71E517 | ||
Power Resins | Temp | castable, dental | 50 | 7.5 | 20 | 125 | 0.5 | [12] | Power ResinsTempAnycubicPhoton Mono X507.5201250.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id 608C9117452D2D8F82A2D0C985038D83 | ||
Power Resins | Wax | castable | 50 | 4 | 8 | 60 | 0.5 | [12] | Power ResinsWaxAnycubicPhoton Mono X5048600.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:26, 15 March 2022. poll-id ABB0E0526CBA0439024B2CA3B5F5758D | ||
Prima Creator | Value Tough | grey, aqua | 50 | 2.8 | 5 | 45 | 0.5 | 80 | [1] | Prima CreatorValue Toughgrey, aquaAnycubicPhoton Mono X502.85450.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id F5968DC1EACFA4FA23C02C324AD456D7 | |
Prusa | Tough | grey | 50 | 1.7 | 6 | 35 | 1 | 80 | [1] | PrusaToughgreyAnycubicPhoton Mono X501.76351 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:58, 8 March 2022. poll-id 006A79DD945D49332DCD11F0210F2118 | |
RepRapper | 201 | red, transparent | 50 | 1.4 | 2 | 17 | 2 | 80 | [1] | RepRapper201red, transparentAnycubicPhoton Mono X501.42172 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id CCA0F3934BA76B2BD255FE1EDEFFEA99 | |
Resione | C01 | 50 | 3.1 | 3 | 35 | 0.5 | 60 | [13] | ResioneC01AnycubicPhoton Mono X503.13350.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 8EA0E2B62BF538AE3217BEBCB1063855 | ||
Resione | D01 | 50 | 2.7 | 3 | 55 | 1 | 60 | [13] | ResioneD01AnycubicPhoton Mono X502.73551 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 50FCF1C13983B93E21CDA5CEF44C9DD5 | ||
Resione | D01S | 50 | 2.9 | 3 | 55 | 0.5 | 60 | [13] | ResioneD01SAnycubicPhoton Mono X502.93550.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 4869E84FA4FF8D9948AC1F3258FAF30A | ||
Resione | F39-F39T | 100 | 2.1 | 3 | 40 | 1 | 60 | [13] | ResioneF39-F39TAnycubicPhoton Mono X1002.13401 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 69E3313604B02BAB21CEEF584A340F1B | ||
Resione | F69-F80 Black | 50 | 2.5 | 3 | 40 | 0.5 | 60 | [13] | ResioneF69-F80 BlackAnycubicPhoton Mono X502.53400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 291D52E539236B6BE4EDA8A8D8BAEED2 | ||
Resione | F80 Gum | 50 | 2.1 | 3 | 40 | 1 | 60 | [13] | ResioneF80 GumAnycubicPhoton Mono X502.13401 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id A24FF5F533B8C2A65DD3A6C72751DF43 | ||
Resione | G217-HT100 | 50 | 2.9 | 3 | 50 | 1 | 60 | [13] | ResioneG217-HT100AnycubicPhoton Mono X502.93501 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id F41FBAE0F4B47032421D291BE12D0C67 | ||
Resione | K | 50 | 2.1 | 3 | 35 | 0.5 | 60 | [13] | ResioneKAnycubicPhoton Mono X502.13350.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 0CB4B4198138382F2DF87BA86DE79EF3 | ||
Resione | M58 | 50 | 1.8 | 3 | 35 | 0.5 | 60 | [13] | ResioneM58AnycubicPhoton Mono X501.83350.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 0B194994116537DA34855DDFE767386D | ||
Resione | M68-EC51 | 50 | 1.7 | 3 | 30 | 0.5 | 60 | [13] | ResioneM68-EC51AnycubicPhoton Mono X501.73300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 64EF4C1DA0E057AD190E9307F8D7A81E | ||
Resione | M70 | 50 | 2.5 | 3 | 80 | 1 | 60 | [13] | ResioneM70AnycubicPhoton Mono X502.53801 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 8006F85FA75BB93CE6BC7FCF5507EDF1 | ||
Resione | MS100 | 50 | 2.3 | 3 | 40 | 0.5 | 60 | [13] | ResioneMS100AnycubicPhoton Mono X502.33400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id F57A963004518915F06365EF2F2E8244 | ||
Resione | PB81 | 50 | 2.3 | 3 | 30 | 0.5 | 60 | [13] | ResionePB81AnycubicPhoton Mono X502.33300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 05F4A1FC21A656232EF954A69BAB9DDD | ||
Resione | W90B | clear, white, blue | 50 | 1.5 | 3 | 30 | 0.5 | 60 | [13] | ResioneW90Bclear, white, blueAnycubicPhoton Mono X501.53300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 673D6EA17C0764F971BFE551E6A22B5B | |
Resione | W90B | orange, grey, black | 50 | 1.6 | 3 | 30 | 0.5 | 60 | [13] | ResioneW90Borange, grey, blackAnycubicPhoton Mono X501.63300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 17:54, 15 March 2022. poll-id 7021B01894B54A345083ABB45DA12FD2 | |
SainSmart | Rapid | transparent | 50 | 1 | 1 | 15 | 2 | 80 | [1] | SainSmartRapidtransparentAnycubicPhoton Mono X5011152 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id E730DEBA3267D9D057AD77D809F27A1C | |
SK honpo | Water Washable | blue | water washable | 30 | 3 | 6 | 80 | 0.5 | 80 | [1] | SK honpoWater WashableblueAnycubicPhoton Mono X3036800.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 54373362DB92F90B8F1CCF82E598A653 |
SUNLU | Standard | grey | 50 | 0.8 | 2 | 15 | 2 | 80 | [1] | SUNLUStandardgreyAnycubicPhoton Mono X500.82152 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 11B428BBD1096EFD28260CBE97E0AE20 | |
SUNLU | Standard | skin | 50 | 1.5 | 4 | 40 | 0.5 | 80 | [1] | SUNLUStandardskinAnycubicPhoton Mono X501.54400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 5194C15197F04413414BF5A8C0B4A8BF | |
Wanhao | Water Washable | clear | water washable | 50 | 3 | 6 | 45 | 1 | 100 | [1] | WanhaoWater WashableclearAnycubicPhoton Mono X5036451 You must log in to vote 0 0 There were 0 votes since the poll was created on 04:20, 16 March 2022. poll-id B43271465F04236BB7C05B864A34C273 |
WEISTEK | ABS-Like | white | 50 | 2.2 | 6 | 18 | 1 | 50 | [1] | WEISTEKABS-LikewhiteAnycubicPhoton Mono X502.26181 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id EF8AB160014FEDB828580685A9AEFEEA | |
WEISTEK | Tough | grey | 50 | 4.2 | 6 | 50 | 0.5 | 60 | [1] | WEISTEKToughgreyAnycubicPhoton Mono X504.26500.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 01B397A1512C500A97522C04D7EDBF9E | |
YOUSU | iForm181 | grey, skin | 50 | 2 | 6 | 30 | 0 | 80 | [1] | YOUSUiForm181grey, skinAnycubicPhoton Mono X5026300 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id CAC6E93F7FC69D0FBAAF4555D0A5CD50 | |
Siraya Tech | Blu | clear v2 | 50 | 2.5 | 6 | 35 | 1 | 80 | [1] | Siraya TechBluclear v2AnycubicPhoton Mono X502.56351 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id AA8C183B5EE377FD9C242B43858E7040 | |
Siraya Tech | Blu | emerald blue | 30 | 3.2 | 6 | 40 | 5 | 50 | [1] | Siraya TechBluemerald blueAnycubicPhoton Mono X303.26405 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 0A22F5491A4C44CF57F2B5E2A56642B6 | |
Siraya Tech | Build | smoky black | 50 | 2.5 | 6 | 25 | 0.5 | 100 | [1] | Siraya TechBuildsmoky blackAnycubicPhoton Mono X502.56250.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 23939C030B2B2B64B2BD07500DC06731 | |
Siraya Tech | Build | sonic grey | 50 | 1.8 | 5 | 12 | 1 | 80 | [1] | Siraya TechBuildsonic greyAnycubicPhoton Mono X501.85121 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id B1D478CD34284E83C9DE66D5FAFDCB0B | |
Siraya Tech | Craft | glow in the dark | 50 | 2 | 5 | 25 | [14] | Siraya TechCraftAnycubicPhoton Mono X502525 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:56, 29 March 2022. poll-id A5F3A9528898BA661719EECCB292FAFB | |||
Siraya Tech | Fast | 50 | 1.6 | 5 | 20 | [14] | Siraya TechFastAnycubicPhoton Mono X501.6520 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:01, 2 April 2022. poll-id 3A492A92875702518C92042A28D981A9 | ||||
Siraya Tech | Fast | black | 50 | 1.5 | 1 | 15 | 2 | [1] | Siraya TechFastblackAnycubicPhoton Mono X501.51152 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:56, 29 March 2022. poll-id 4993E8974AC46C1646A87BC74681F6F7 | ||
Siraya Tech | Fast | grey, smoky black | 50 | 1.5 | 6 | 20 | 0.5 | 100 | [1] | Siraya TechFastgrey, smoky blackAnycubicPhoton Mono X501.56200.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id F2410CD506DF07357A8C1E6AD928BDF7 | |
Siraya Tech | Fast | navy grey | 30 | 1.6 | 5 | 32 | 0.5 | 80 | [1] | Siraya TechFastnavy greyAnycubicPhoton Mono X301.65320.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 59AE489E5A07E9618C0E426571DFF688 | |
Siraya Tech | Fast | white | 50 | 1.5 | 5 | 20 | 0 | 100 | [1] | Siraya TechFastwhiteAnycubicPhoton Mono X501.55200 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id B3CD51BC856EC007DB8309B02C0E36A0 | |
Siraya Tech | Sculpt | clear | high temp | 50 | 2.2 | 30 | 80 | [8] | Siraya TechSculptclearAnycubicPhoton Mono X502.230 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 326690B12C4A46323B1DEF9B870E959E | ||
Siraya Tech | Sculpt | grey | high temp | 50 | 2.5 | 4 | 35 | 0.5 | 80 | [1] | Siraya TechSculptgreyAnycubicPhoton Mono X502.54350.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id B2983E20F66648E0554048FFBC4F019B |
Siraya Tech | Sculpt | ultra white | high temp | 50 | 2.25 | 5 | 30 | [14] | Siraya TechSculptultra whiteAnycubicPhoton Mono X502.25530 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:56, 29 March 2022. poll-id 2BCC10EB2FBB4C20CDE2E5E8C6168519 | ||
Siraya Tech | Simple | clear | 50 | 1.3 | 6 | 9.3 | 0.5 | [14] | Siraya TechSimpleclearAnycubicPhoton Mono X501.369.30.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 4A59557BD7BFFB8FE685C231A300E9A9 | ||
Siraya Tech | Simple | smoky black | 50 | 1.6 | 30 | 80 | [8] | Siraya TechSimplesmoky blackAnycubicPhoton Mono X501.630 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 691347FF19A8D2081432D750FD24B7F8 | |||
Siraya Tech | Tenacious | clear | flexible | 50 | 3 | 5 | 20 | 0.5 | [14] | Siraya TechTenaciousclearAnycubicPhoton Mono X5035200.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:45, 20 March 2022. poll-id 11FA6AD8DB13FFD42E119F782267762A | |
Siraya Tech | Blu V2 | clear | 50 | 1.5 | 6 | 15 | 1 | [15] | Siraya TechBlu V2clearEPAXE10-8K501.56151 You must log in to vote 0 0 There were 0 votes since the poll was created on 03:09, 29 June 2022. poll-id 386B4DB86BAA1D11282DCB4CF255E2DF |
How to use the spreadsheet (Step-by-step)
1. Find the resin you'd like to use
You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes.
If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.
2. Check the source
The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations.
3. Copy the parameters into your slicer
The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.)
Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model.
4. Print a test file for validation
This is a crucial step, and one you shouldn't skip. Every printer is slightly different, and the settings that work on one unit might not work the same on another.
As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.
You should always start out with a small test file to check if the settings work before launching a larger print.
5. Inspect the test file
If the print looks good, you can go ahead and use the settings as they are.
If you see any imperfections, (such as lack of detail, brittleness, discoloration etc.) adjust the settings according to the resin validation guide.
6. Help out others
If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.)
If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters.
You can help even more by adding other compatible resins with the Add new settings button.
Other important factors
There are some factors that greatly influence your printing success no matter what material you choose.
1. Maintain adequate temperature
You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.
2. Shake your resin
Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.
You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.
3. Check your expiration date
Keep away from direct sunlight. Store in a cool, dry place. Do not exceed expiration date. Use soon after opening.
What's true for most of your food cupboard is true for resins as well.
While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.
Resin settings explained
If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.
The Anycubic Photon Mono X is an open type of 3D printer. This means it can use any brand of resin, not just the ones sold by Anycubic.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems.
For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
- Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly.
- μm: 1 micron or 0.001 milimeters.
- Normal exposure time: The amount of time each normal layer will be cured for.
- Number of base layers: At the start of the print, you must cure a few layers for a longer time. This helps the model stick to the build plate.
- Base layer exposure time: The amount of time each base layer will be cured for.
- Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.
Community tips
If you have a tip related to Anycubic Photon Mono X resin settings, tell others about it below.
- ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.30 1.31 1.32 1.33 1.34 1.35 1.36 1.37 1.38 1.39 1.40 1.41 1.42 1.43 1.44 1.45 1.46 1.47 1.48 1.49 1.50 1.51 1.52 1.53 1.54 1.55 1.56 1.57 1.58 1.59 1.60 1.61 1.62 1.63 1.64 1.65 1.66 1.67 1.68 1.69 1.70 1.71 1.72 1.73 1.74 1.75 1.76 1.77 1.78 1.79 1.80 1.81 1.82 1.83 1.84 1.85 1.86 1.87 "Photon Mono X Resin Settings Log". Google Sheets.
- ↑ 2.0 2.1 2.2 2.3 2.4 "#3DRS Resin Settings & Support". 3D Resin Solutions.
- ↑ 3.0 3.1 3.2 3.3 3.4 "Exposure Settings". 3D Resin Solutions.
- ↑ 4.0 4.1 4.2 4.3 4.4 4.5 "3D Printing Resins for LCD, DLP". 3DMaterials.
- ↑ 5.0 5.1 5.2 5.3 "3D Printing Settings". AmeraLabs.
- ↑ 6.0 6.1 6.2 6.3 "All You Need to Know about Anycubic Resin Settings". Anycubic.
- ↑ 7.0 7.1 7.2 7.3 7.4 7.5 7.6 "Download". BlueCast.
- ↑ 8.0 8.1 8.2 "MSLA, DLP, and SLA Resin Print Settings". 4D Filtration.
- ↑ "3D Printing Settings". eSUN 3D Printing Materials.
- ↑ 10.0 10.1 10.2 10.3 10.4 "3D Printer resin". FormFutura.
- ↑ 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 "Compatible 3D-printers with Liqcreate resins". Liqcreate.
- ↑ 12.0 12.1 12.2 12.3 12.4 12.5 "Printer Settings". powerresins.
- ↑ 13.00 13.01 13.02 13.03 13.04 13.05 13.06 13.07 13.08 13.09 13.10 13.11 13.12 13.13 13.14 "Settings". RESIONE.
- ↑ 14.0 14.1 14.2 14.3 14.4 "support". Siraya Tech.
- ↑ "devinb86". Maker Trainer.
Enable comment auto-refresher
Anonymous user #1
Permalink |
Admin
Anonymous user #1
Permalink |
Admin
Anonymous user #1
Permalink |
Admin