Anycubic Photon Mono SE resin settings
From Maker Trainer, the online makerspace
Below you can find a list of resins which are compatible with the Anycubic Photon Mono SE.
The Photon Mono SE is an open material 3D printer, meaning it can print with any brand of resin, not just the ones made by Anycubic. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them.
You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.
Anycubic Photon Mono SE resin settings spreadsheet
The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.
The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.
| Resin brand | Resin name | Resin color | Resin type | At layer height (μm) | Exp. time (s) | Base layer count | Base exp. time (s) | Light off time (s) | Ref | Confirm |
|---|---|---|---|---|---|---|---|---|---|---|
| 3DJake | Color Mix | clear | colorable | 50 | 3 | 6 | 30 | 1 | [1] | 3DJakeColor MixclearAnycubicPhoton Mono SE5036301 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 252B19FCD1139853F2CD5D03B8F4F6D3 |
| 3DJake | Color Mix | transparent yellow | colorable | 50 | 4 | 5 | 50 | 1 | [1] | 3DJakeColor Mixtransparent yellowAnycubicPhoton Mono SE5045501 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 0A311AD4A3BAA4A1992212CC5FCF38EE |
| Alphasense | Castable | green | castable | 50 | 1.5 | 7 | 23 | 0.55 | [1] | AlphasenseCastablegreenAnycubicPhoton Mono SE501.57230.55 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 381E6C2DD5C51A922346962C37D3CF5A |
| Anycubic | Basic | aqua, translucent green | 50 | 1.8 | 6 | 40 | 0.5 | [1] | AnycubicBasicaqua, translucent greenAnycubicPhoton Mono SE501.86400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id CCE1FF18328A2584EFF384A838202563 | |
| Anycubic | Basic | black | 50 | 1.75 | 4 | 10 | 1 | [1] | AnycubicBasicblackAnycubicPhoton Mono SE501.754101 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 9A78D4C299C2947A9A508D92B8B86C89 | |
| Anycubic | Basic | grey | 50 | 1.8 | 6 | 30 | 1 | [1] | AnycubicBasicgreyAnycubicPhoton Mono SE501.86301 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 6512CD5CE04F1C1583A59154DBAD68B0 | |
| Anycubic | Basic | translucent | 50 | 2.2 | 6 | 15 | 1 | [1] | AnycubicBasictranslucentAnycubicPhoton Mono SE502.26151 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 01B636EC7609A73410BBB4E66C16553D | |
| Anycubic | Basic | white | 30 | 3 | 5 | 14 | 5 | [1] | AnycubicBasicwhiteAnycubicPhoton Mono SE3035145 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id FEF7791512D48C1A60FE9B16AF4FACB7 | |
| Anycubic | Basic | 50 | 1.5 | 6 | 30 | 0.5 | [1] | AnycubicBasicAnycubicPhoton Mono SE501.56300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 80B9246018521A5E827C58449E20024A | ||
| Anycubic | Dental Castable | dental, castable | 50 | 1.5 | 6 | 30 | 0.5 | [1] | AnycubicDental CastableAnycubicPhoton Mono SE501.56300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 17B570DA34A512D422F954A1B6C3F764 | |
| Anycubic | Flexible Tough | flexible | 50 | 1.5 | 6 | 30 | 1 | [1] | AnycubicFlexible ToughAnycubicPhoton Mono SE501.56301 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id A3D0628A0FC168C11C835040552A0CC5 | |
| Anycubic | Plant-Based | clear, grey | 50 | 1.5 | 6 | 20 | 1 | [1] | AnycubicPlant-Basedclear, greyAnycubicPhoton Mono SE501.56201 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id AE12640012F4425E085C539F0FF64092 | |
| Anycubic | Plant-Based | green | 50 | 1.8 | 6 | 25 | 0.5 | [1] | AnycubicPlant-BasedgreenAnycubicPhoton Mono SE501.86250.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 6DBDF48EF1BB6B8E70AFB98A4DA7FAB8 | |
| Anycubic | Plant-Based | grey | 50 | 1.5 | 20 | [1] | AnycubicPlant-BasedgreyAnycubicPhoton Mono SE501.520 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id D3568B4B5EADF558141CCE9BC6FACC14 | |||
| Anycubic | Plant-Based | 50 | 1.5 | 6 | 30 | 0.5 | [1] | AnycubicPlant-BasedAnycubicPhoton Mono SE501.56300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id D661FE44E1D6146BC0E1D1226D99E828 | ||
| BlueCast | CR3A | castable | 30 | 10 | 50 | 2.3 | 7 | [2] | BlueCastCR3AAnycubicPhoton Mono SE3010502.37 You must log in to vote 1 0 There was one vote since the poll was created on 12:39, 7 March 2022. poll-id 4CF2CD544BE4CD22E7CDCB5F66AF6445 | |
| BlueCast | Dental | grey, beige | castable, dental | 30 | 10 | 50 | 3.2 | 7 | [2] | BlueCastDentalgrey, beigeAnycubicPhoton Mono SE3010503.27 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 2A8E6263FC065DAB0457CEB1F8D52EFA |
| BlueCast | Model HR | 30 | 10 | 50 | 3.8 | 7 | [2] | BlueCastModel HRAnycubicPhoton Mono SE3010503.87 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 051BC25FD2CA40FFAB641731B4256AD9 | ||
| BlueCast | Original | castable | 30 | 10 | 60 | 3.2 | 7 | [2] | BlueCastOriginalAnycubicPhoton Mono SE3010603.27 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id E6B16EC51E02509F53A8EEC7962AD806 | |
| BlueCast | X-ONE | castable | 30 | 10 | 15 | 5.2 | 7 | [2] | BlueCastX-ONEAnycubicPhoton Mono SE3010155.27 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id BE56402D5DFC94C9433ED2E06A46DF34 | |
| BlueCast | X10 | castable | 30 | 10 | 60 | 2.6 | 7 | [2] | BlueCastX10AnycubicPhoton Mono SE3010602.67 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 42D9D3322AA17E916E9CFA3FC98FC95F | |
| BlueCast | X5 | castable | 30 | 10 | 60 | 2.6 | 7 | [2] | BlueCastX5AnycubicPhoton Mono SE3010602.67 You must log in to vote 0 0 There were 0 votes since the poll was created on 12:39, 7 March 2022. poll-id 6D122AD6DA90B1D8D9D3C0F6B49B3937 | |
| ELEGOO | ABS-Like | grey | 20 | 0.9 | 6 | 25 | 1 | [1] | ELEGOOABS-LikegreyAnycubicPhoton Mono SE200.96251 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id EF3899A6C7AA6B6989ACCBF5830903D2 | |
| ELEGOO | ABS-Like | red | 50 | 1.5 | 50 | [3] | ELEGOOABS-LikeredAnycubicPhoton Mono SE501.550 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 2EE7502BD38AFAB3D26756F0A8102915 | |||
| ELEGOO | Standard | transpartent red | 50 | 1.5 | 6 | 50 | 1.5 | [1] | ELEGOOStandardtranspartent redAnycubicPhoton Mono SE501.56501.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 298ACA06C740C2DD02042993EA90BEA6 | |
| Eryone | Standard | clear | 50 | 2.5 | 6 | 35 | 0.5 | [1] | EryoneStandardclearAnycubicPhoton Mono SE502.56350.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id C8107C596F63A91BCCE545CC62864B2E | |
| Eryone | Water Washable | grey | water washable | 50 | 1.5 | 6 | 40 | 0 | [1] | EryoneWater WashablegreyAnycubicPhoton Mono SE501.56400 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 89FC557CB379B85A75D8C766ACD169D1 |
| eSUN | eResin-PLA Pro | 50 | 3.5 | 6 | 40 | [4] | eSUNeResin-PLA ProAnycubicPhoton Mono SE503.5640 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:01, 7 March 2022. poll-id BF34A9047A9F0FD940B1B4C9E4EFD535 | |||
| eSUN | Water Washable | black | water washable | 50 | 1.5 | 6 | 40 | 1 | [1] | eSUNWater WashableblackAnycubicPhoton Mono SE501.56401 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:01, 7 March 2022. poll-id 3CEEB49AA8E8E171DD7784E7D205FCB0 |
| eSUN | Water Washable | grey | water washable | 50 | 2 | 6 | 30 | 0.5 | [1] | eSUNWater WashablegreyAnycubicPhoton Mono SE5026300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:01, 7 March 2022. poll-id EFA5175372490271015860F3A2DC278F |
| FormFutura | Color Mix Standard | colorable | 50 | 3 | 4 | 45 | 0.5 | [5] | FormFuturaColor Mix StandardAnycubicPhoton Mono SE5034450.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id 5212C0CECF4815C03EDCC406CAEA46A6 | |
| FormFutura | Color Mix Water Washable | colorable, water washable | 50 | 4 | 4 | 40 | [5] | FormFuturaColor Mix Water WashableAnycubicPhoton Mono SE504440 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id 4430B9FEF2D8F2C3FCCE59F9B017F241 | ||
| FormFutura | Flex 63A | flexible | 50 | 3 | 2 | 35 | 3 | [5] | FormFuturaFlex 63AAnycubicPhoton Mono SE5032353 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id 61C87656E7B038EA23AD163D9D4ED793 | |
| FormFutura | Flex 82A | flexible | 50 | 5.5 | 6 | 35 | 0.5 | [5] | FormFuturaFlex 82AAnycubicPhoton Mono SE505.56350.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id 6A458261E24089051BD0698C0572E35A | |
| FormFutura | Impact 71D | 50 | 3.5 | 6 | 50 | 0.5 | [5] | FormFuturaImpact 71DAnycubicPhoton Mono SE503.56500.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id 4950AD8330EDA144E0A721AAE0244189 | ||
| FormFutura | Rigid Ceramic | 50 | 6.5 | 4 | 65 | 0.5 | [5] | FormFuturaRigid CeramicAnycubicPhoton Mono SE506.54650.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id D950EFF161082C57EE91FCEC04470E53 | ||
| FormFutura | SLA Tough | 50 | 7.5 | 4 | 65 | 1 | [5] | FormFuturaSLA ToughAnycubicPhoton Mono SE507.54651 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:51, 7 March 2022. poll-id 36F2CA33FD02BD51872058A5D510F696 | ||
| HARZ Labs | Dental | clear | dental | 50 | 2 | 6 | 20 | 4 | [1] | HARZ LabsDentalclearAnycubicPhoton Mono SE5026204 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:07, 7 March 2022. poll-id 17EB7F451C6EBE5B840C478A2C90652B |
| JAMG HE | Conjure Rigid | 50 | 4.5 | 5 | 25 | [6][7] | JAMG HEConjure RigidAnycubicPhoton Mono SE504.5525 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:39, 7 March 2022. poll-id 85262853013F8938C86513C505DA0988 | |||
| JAMG HE | Conjure Sculpt | 50 | 4.5 | 5 | 25 | [6][7] | JAMG HEConjure SculptAnycubicPhoton Mono SE504.5525 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:39, 7 March 2022. poll-id 5069B4456945DC735C96C44542D90E02 | |||
| JAMG HE | Conjure Tough | 50 | 4.5 | 5 | 25 | [6][7] | JAMG HEConjure ToughAnycubicPhoton Mono SE504.5525 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:39, 7 March 2022. poll-id EFDB670608FBB91BC908A8C3D92DB230 | |||
| Liqcreate | Clear Impact | clear | 50 | 8 | 3 | 60 | 1 | [8] | LiqcreateClear ImpactclearAnycubicPhoton Mono SE5083601 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id FF1EDD89918096E405117F240ABDA302 | |
| Liqcreate | Composite-X | 50 | 5 | 3 | 40 | 1 | [8] | LiqcreateComposite-XAnycubicPhoton Mono SE5053401 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 750C96A4AD785587A34FF663F65030D9 | ||
| Liqcreate | Deep Blue | blue | 50 | 5 | 3 | 70 | 1 | [8] | LiqcreateDeep BlueblueAnycubicPhoton Mono SE5053701 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 98814BB5A7158F8413C806E6048C98F2 | |
| Liqcreate | Dental Model Pro | beige | dental | 50 | 5 | 2 | 30 | 2 | [8] | LiqcreateDental Model ProbeigeAnycubicPhoton Mono SE5052302 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 0AA1A9F550B540D81A643E6B9B7179AF |
| Liqcreate | Dental Model Pro | grey | dental | 50 | 3 | 2 | 50 | 2 | [8] | LiqcreateDental Model ProgreyAnycubicPhoton Mono SE5032502 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id FB1AD4571D05348357CBF39A215192C2 |
| Liqcreate | Flexible-X | flexible | 100 | 9 | 2 | 75 | 2 | [8] | LiqcreateFlexible-XAnycubicPhoton Mono SE10092752 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id A363AC3E450FF9E175665CEAEF9417BF | |
| Liqcreate | Gingiva Mask | dental | 100 | 15 | 2 | 80 | 2 | [8] | LiqcreateGingiva MaskAnycubicPhoton Mono SE100152802 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 5129430863C4493013D5BB118DEFD062 | |
| Liqcreate | Hazard Glow | glow in the dark | 100 | 8 | 2 | 60 | 1 | [8] | LiqcreateHazard GlowAnycubicPhoton Mono SE10082601 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 1A9BE2F19F006BB23E523BC3D0DB62E7 | |
| Liqcreate | Premium Black | black | 50 | 3.5 | 2 | 50 | 1 | [8] | LiqcreatePremium BlackblackAnycubicPhoton Mono SE503.52501 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id C1A77EED2D18102D3022CB301897F5E5 | |
| Liqcreate | Premium Flex | flexible | 100 | 4 | 2 | 40 | 2 | [8] | LiqcreatePremium FlexAnycubicPhoton Mono SE10042402 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id F8957DF86156D650EC327FB8DA451ECC | |
| Liqcreate | Premium Model | 50 | 2 | 2 | 20 | 2 | [8] | LiqcreatePremium ModelAnycubicPhoton Mono SE5022202 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 5D2CF766F98DE37CCE4856F473F02A5F | ||
| Liqcreate | Premium Tough | 50 | 5 | 2 | 20 | 2 | [8] | LiqcreatePremium ToughAnycubicPhoton Mono SE5052202 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 094C9D441A404FD4CC1A47CBBCF3D91F | ||
| Liqcreate | Premium White | white | 100 | 4 | 2 | 60 | 1 | [8] | LiqcreatePremium WhitewhiteAnycubicPhoton Mono SE10042601 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 944542043F5861C4D486783EFB9BD4C2 | |
| Liqcreate | Stone Coal Black | black | 50 | 5 | 3 | 50 | 1 | [8] | LiqcreateStone Coal BlackblackAnycubicPhoton Mono SE5053501 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 4564F04ADF0A08F5013D2D81307E3A80 | |
| Liqcreate | Strong-X | 50 | 6.5 | 3 | 80 | 1 | [8] | LiqcreateStrong-XAnycubicPhoton Mono SE506.53801 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 1065506AC046C9728C9BC40B9F6AE88C | ||
| Liqcreate | Tough-X | 50 | 12 | 3 | 60 | 2 | [8] | LiqcreateTough-XAnycubicPhoton Mono SE50123602 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 6C362229D5D9F849A016CA637E7F3BA6 | ||
| Liqcreate | Wax Castable | castable | 50 | 3 | 3 | 40 | 2 | [8] | LiqcreateWax CastableAnycubicPhoton Mono SE5033402 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 04F07AA729764383EF4586D4D6CD5352 | |
| Plexiwire | Basic | transparent blue | 50 | 2.6 | 6 | 25 | 1 | [1] | PlexiwireBasictransparent blueAnycubicPhoton Mono SE502.66251 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 292F01EE4BCB10B13E440024331B6F29 | |
| Power Resins | Burn | castable, dental | 50 | 4 | 8 | 70 | 0.5 | [9] | Power ResinsBurnAnycubicPhoton Mono SE5048700.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id A5E4836B47BA1B49929237961F78A8E2 | |
| Power Resins | Dark | castable | 50 | 6 | 8 | 100 | 0.5 | [9] | Power ResinsDarkAnycubicPhoton Mono SE50681000.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 4C8D9F06EEDF74367DE376B4FCCABC1C | |
| Power Resins | Model | castable, dental | 50 | 6 | 8 | 100 | 0.5 | [9] | Power ResinsModelAnycubicPhoton Mono SE50681000.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 0BE2FE622FC5047529F8934E65B52FAA | |
| Power Resins | Opaque | castable | 50 | 4 | 8 | 70 | 0.5 | [9] | Power ResinsOpaqueAnycubicPhoton Mono SE5048700.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id AAB81828BE1F6F7811B23BF409E931F5 | |
| Power Resins | Temp | castable, dental | 50 | 6 | 20 | 100 | 0.5 | [9] | Power ResinsTempAnycubicPhoton Mono SE506201000.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 0B9BD68F798510510E5128E7E3CC3096 | |
| Power Resins | Wax | castable | 50 | 3.2 | 8 | 60 | 0.5 | [9] | Power ResinsWaxAnycubicPhoton Mono SE503.28600.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id CE9384E9E5CD14B5405DDD62B23080FB | |
| Prima Creator | Water Washable | white | water washable | 50 | 1.4 | 6 | 20 | 1 | [1] | Prima CreatorWater WashablewhiteAnycubicPhoton Mono SE501.46201 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id C1151C4750D0A0F29582F55B1E1BDF3F |
| Resione | C01 | 50 | 2.5 | 3 | 40 | 0.5 | [10] | ResioneC01AnycubicPhoton Mono SE502.53400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 69014F532AF7CC8FADF10827C6F218EA | ||
| Resione | D01 | 50 | 2.2 | 3 | 50 | 0.5 | [10] | ResioneD01AnycubicPhoton Mono SE502.23500.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id EDD614A9415D79984D98A334238BE75B | ||
| Resione | D01S | 50 | 2.3 | 3 | 50 | 0.5 | [10] | ResioneD01SAnycubicPhoton Mono SE502.33500.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 4A583573A7EF2AE0F8EEAE772B6D570C | ||
| Resione | F39-F39T | 100 | 1.7 | 3 | 45 | 1 | [10] | ResioneF39-F39TAnycubicPhoton Mono SE1001.73451 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id B2008B08D3D3727857D027F3537394C6 | ||
| Resione | F69-F80 Black | 50 | 2 | 3 | 45 | 1 | [10] | ResioneF69-F80 BlackAnycubicPhoton Mono SE5023451 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 7ED3C21DC7CF3E8320FF01FF825DC813 | ||
| Resione | F80 Gum | 50 | 1.7 | 3 | 45 | 1 | [10] | ResioneF80 GumAnycubicPhoton Mono SE501.73451 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 6ADC49D5DE62DA2BD6BFF35C3FF243D2 | ||
| Resione | G217-HT100 | 50 | 2.3 | 3 | 55 | 1 | [10] | ResioneG217-HT100AnycubicPhoton Mono SE502.33551 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id BC2D02B82FB1F4E91729DF74D37AD078 | ||
| Resione | K | 50 | 1.7 | 3 | 45 | 0.5 | [10] | ResioneKAnycubicPhoton Mono SE501.73450.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 93E3205B54FAAA6687401CC2FD1960C8 | ||
| Resione | M58 | 50 | 1.4 | 3 | 40 | 0.5 | [10] | ResioneM58AnycubicPhoton Mono SE501.43400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 63691EF2898336FFBBD826648A6FCA29 | ||
| Resione | M68-EC51 | 50 | 1.3 | 3 | 35 | 0.5 | [10] | ResioneM68-EC51AnycubicPhoton Mono SE501.33350.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 943285BC19DADA064BFC8C29FA0C890D | ||
| Resione | M70 | 50 | 2 | 3 | 65 | 1.5 | [10] | ResioneM70AnycubicPhoton Mono SE5023651.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id AC75907112A01CB1C6F174C9F2AC90D9 | ||
| Resione | MS100 | 50 | 1.8 | 3 | 40 | 0.5 | [10] | ResioneMS100AnycubicPhoton Mono SE501.83400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 5F853740A378BF72954E233B15D61D54 | ||
| Resione | PB81 | 50 | 1.8 | 3 | 30 | 0.5 | [10] | ResionePB81AnycubicPhoton Mono SE501.83300.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id C370A3521D9EE67C646738838AC845C3 | ||
| Resione | W90B | clear, white, blue | 50 | 1.2 | 3 | 35 | 0.5 | [10] | ResioneW90Bclear, white, blueAnycubicPhoton Mono SE501.23350.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id D0D5F025DBB556F109D1254931F1A090 | |
| Resione | W90B | orange, grey, black | 50 | 1.3 | 3 | 35 | 0.5 | [10] | ResioneW90Borange, grey, blackAnycubicPhoton Mono SE501.33350.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 094A891E3AE7C24BD89B58E010802BBA | |
| Siraya Tech | Build | sonic grey | 100 | 1.4 | 6 | 20 | 0.5 | [1] | Siraya TechBuildsonic greyAnycubicPhoton Mono SE1001.46200.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id EB28647B9879689B365655D0C40573BE | |
| Siraya Tech | Fast | 50 | 1.6 | 5 | 20 | [11] | Siraya TechFastAnycubicPhoton Mono SE501.6520 You must log in to vote 0 0 There were 0 votes since the poll was created on 03:47, 30 March 2022. poll-id 3770D95247BB3DBFD0D27BE116117850 | |||
| Siraya Tech | Fast | grey | 50 | 1.5 | 22 | [3] | Siraya TechFastgreyAnycubicPhoton Mono SE501.522 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 55CFD91EAFDE5B2F95BD1A06FC7D7167 | |||
| Siraya Tech | Fast | navy grey | 50 | 1.5 | 6 | 40 | 0.5 | [1] | Siraya TechFastnavy greyAnycubicPhoton Mono SE501.56400.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 28941F316DBCFA6AE125AB4ABB0ECF81 | |
| Siraya Tech | Blu | emerald blue | 50 | 2.5 | 4 | 8 | 0.5 | [12] | Siraya TechBluemerald blueAnycubicPhoton Mono SE1002.5480.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:24, 29 June 2022. poll-id 2E2596E46A38461E9BFBEF432272EEFD |
How to use the spreadsheet (Step-by-step)
1. Find the resin you'd like to use
You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes.
If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.
2. Check the source
The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations.
3. Copy the parameters into your slicer
The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.)
Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model.
4. Print a test file for validation
This is a crucial step, and one you shouldn't skip. Every printer is slightly different, and the settings that work on one unit might not work the same on another.
As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.
You should always start out with a small test file to check if the settings work before launching a larger print.
5. Inspect the test file
If the print looks good, you can go ahead and use the settings as they are.
If you see any imperfections, (such as lack of detail, brittleness, discoloration etc.) adjust the settings according to the resin validation guide.
6. Help out others
If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.)
If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters.
You can help even more by adding other compatible resins with the Add new settings button.
Other important factors
There are some factors that greatly influence your printing success no matter what material you choose.
1. Maintain adequate temperature
You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.
2. Shake your resin
Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.
You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.
3. Check your expiration date
Keep away from direct sunlight. Store in a cool, dry place. Do not exceed expiration date. Use soon after opening.
What's true for most of your food cupboard is true for resins as well.
While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.
Resin settings explained
If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.
The Anycubic Photon Mono SE is an open type of 3D printer. This means it can use any brand of resin, not just the ones sold by Anycubic.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems.
For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
- Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly.
- μm: 1 micron or 0.001 milimeters.
- Normal exposure time: The amount of time each normal layer will be cured for.
- Number of base layers: At the start of the print, you must cure a few layers for a longer time. This helps the model stick to the build plate.
- Base layer exposure time: The amount of time each base layer will be cured for.
- Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.
Community tips
If you have a tip related to Anycubic Photon Mono SE resin settings, tell others about it below.
- ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 "Anycubic Photon Mono SE". Google Sheets.
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 "Download". BlueCast.
- ↑ 3.0 3.1 "MSLA, DLP, and SLA Resin Print Settings". 4D Filtration.
- ↑ "3D Printing Settings". eSUN 3D Printing Materials.
- ↑ 5.0 5.1 5.2 5.3 5.4 5.5 5.6 "3D Printer resin". FormFutura.
- ↑ 6.0 6.1 6.2 "Conjure resin profile 20210912". Google Sheets.
- ↑ 7.0 7.1 7.2 "JAMG HE Conjure Rigid Resin". ChiTu Systems!.
- ↑ 8.00 8.01 8.02 8.03 8.04 8.05 8.06 8.07 8.08 8.09 8.10 8.11 8.12 8.13 8.14 8.15 8.16 "Compatible 3D-printers with Liqcreate resins". Liqcreate.
- ↑ 9.0 9.1 9.2 9.3 9.4 9.5 "Printer Settings". powerresins.
- ↑ 10.00 10.01 10.02 10.03 10.04 10.05 10.06 10.07 10.08 10.09 10.10 10.11 10.12 10.13 10.14 "Settings". RESIONE.
- ↑ "support". Siraya Tech.
- ↑ "Gibbo". Maker Trainer.
Enable comment auto-refresher