Phrozen Sonic Mini & Mini 4K resin settings
From Maker Trainer, the online makerspace
Revision as of 15:16, 2 May 2022 by Admin (talk | contribs) (Created page with "Below you can find a list of resins which are compatible with the Phrozen Sonic Mini and Mini 4K. These are open material 3D printers, meaning they can print with any brand of resin, not just the ones made by Phrozen. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them. You can always figure this out through some Resin validation|experimentation...")
Below you can find a list of resins which are compatible with the Phrozen Sonic Mini and Mini 4K.
These are open material 3D printers, meaning they can print with any brand of resin, not just the ones made by Phrozen. This gives you a great amount of freedom, but comes with its own challenge of knowing which resins are compatible, and how to print them.
You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.
Phrozen Sonic Mini & Mini 4K resin settings spreadsheet
The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc.
The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.
| Resin brand | Resin name | Resin color | Resin type | At layer height (μm) | Exp. time (s) | Base layer count | Base exp. time (s) | Light off time (s) | Ref | Confirm |
|---|---|---|---|---|---|---|---|---|---|---|
| 3D Resin Solutions | HARD Rapid ABS | 50 | 3.5 | 10 | 40 | 1 | [1] | 3D Resin SolutionsHARD Rapid ABSPhrozenSonic Mini, Sonic Mini 4K503.510401 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 069503EDB770834BDE391486A7CB7CE3 | ||
| 3D Resin Solutions | Hero | 50 | 6 | 5 | 20 | 7 | [1] | 3D Resin SolutionsHeroPhrozenSonic Mini, Sonic Mini 4K5065207 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 57F9F42ED9E62FEE593879C8BC98B0DE | ||
| 3D Resin Solutions | HERO Evolution | 50 | 4 | 10 | 45 | 1 | [1] | 3D Resin SolutionsHERO EvolutionPhrozenSonic Mini, Sonic Mini 4K50410451 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 541796C093EB570E82E14FEB3C487F80 | ||
| 3D Resin Solutions | HERO Tough | 50 | 4.5 | 10 | 55 | 1 | [1] | 3D Resin SolutionsHERO ToughPhrozenSonic Mini, Sonic Mini 4K504.510551 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 9755B73CE314EE13EF6C8DC4171AB198 | ||
| 3D Resin Solutions | Standard V2 | 50 | 4.5 | 10 | 50 | 1 | [1] | 3D Resin SolutionsStandard V2PhrozenSonic Mini, Sonic Mini 4K504.510501 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 1833D5DB399C10E409024B833EDA9EAF | ||
| 3D Resin Solutions | Studio Fabrication | 50 | 4 | 10 | 50 | 1 | [1] | 3D Resin SolutionsStudio FabricationPhrozenSonic Mini, Sonic Mini 4K50410501 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id A405A30B70B3FDA3FBC6B72A5C00AEAA | ||
| 3DMaterials | SuperFast | amber | 50 | 1.3 | 10 | [2] | 3DMaterialsSuperFastamberPhrozenSonic Mini, Sonic Mini 4K501.310 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id DEF1C5AB84D9D495DA22F700B601E646 | |||
| 3DMaterials | SuperFast | black | 50 | 1.6 | 10 | [2] | 3DMaterialsSuperFastblackPhrozenSonic Mini, Sonic Mini 4K501.610 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 3CE7665A7AF4C2AE7439C5F7915B50C0 | |||
| 3DMaterials | SuperFast | clear | 50 | 1.4 | 10 | [2] | 3DMaterialsSuperFastclearPhrozenSonic Mini, Sonic Mini 4K501.410 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id F34B2FB91B4F6958ACA88B431329095F | |||
| 3DMaterials | SuperFast | clear, white | 50 | 1.5 | 10 | [2] | 3DMaterialsSuperFastclear, whitePhrozenSonic Mini, Sonic Mini 4K501.510 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 9EA93ECFE4BBFC810570765F61E9163B | |||
| 3DMaterials | SuperFlex | flexible | 50 | 2 | 10 | [2] | 3DMaterialsSuperFlexPhrozenSonic Mini, Sonic Mini 4K50210 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id 367A624674A9978F5CC6368AE702C86E | |||
| 3DMaterials | SuperHDT | high temp | 50 | 8.5 | 10 | [2] | 3DMaterialsSuperHDTPhrozenSonic Mini, Sonic Mini 4K508.510 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id AF81C7AA2E644931B9783E593EA00559 | |||
| 3DMaterials | SuperHDT | high temp | 50 | 9 | 10 | [2] | 3DMaterialsSuperHDTPhrozenSonic Mini, Sonic Mini 4K50910 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:44, 16 March 2022. poll-id D690F1AB06A51CBA3D6D30CA217CE205 | |||
| Ameralabs | AMD-3 LED | black | 50 | 1.8 | 4 | 30 | 11.5 | [3] | AmeralabsAMD-3 LEDblackPhrozenSonic Mini, Sonic Mini 4K501.843011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 206DC821E52C5709207B005D5B025B8E | |
| Ameralabs | AMD-3 LED | grey | 50 | 2.3 | 4 | 40 | 11.5 | [3] | AmeralabsAMD-3 LEDgreyPhrozenSonic Mini, Sonic Mini 4K502.344011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 6173205FE405D9429B8037FB81C0E099 | |
| Ameralabs | DMD-21 LED | sand | dental | 50 | 2.3 | 4 | 40 | 11.5 | [3] | AmeralabsDMD-21 LEDsandPhrozenSonic Mini, Sonic Mini 4K502.344011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id B0E15606D656EE09FD644BF0D2B564CD |
| Ameralabs | TGM-7 LED | grey | 50 | 2.9 | 4 | 50 | 11.5 | [3] | AmeralabsTGM-7 LEDgreyPhrozenSonic Mini, Sonic Mini 4K502.945011.5 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 3AF969243901F6751C89B170154C6309 | |
| Anycubic | Basic | translucent green | 50 | 2 | 6 | 25 | 7 | [4] | AnycubicBasictranslucent greenPhrozenSonic Mini, Sonic Mini 4K5026257 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:59, 17 March 2022. poll-id 04A7E7AE8B21C89220D86A6B76532035 | |
| BlueCast | CR3A | castable | 50 | 5 | 40 | 2.7 | [5] | BlueCastCR3APhrozenSonic Mini, Sonic Mini 4K505402.7 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 9986BF6935810AB87E5CE792C8F7AC3A | ||
| BlueCast | Dental | grey, beige | castable, dental | 50 | 5 | 35 | 4.2 | 2.7 | [5] | BlueCastDentalgrey, beigePhrozenSonic Mini, Sonic Mini 4K505354.22.7 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 83F0CC0B38A64050B71BFD30D5649FA3 |
| BlueCast | Model HR | 50 | 5 | 35 | 3.2 | [5] | BlueCastModel HRPhrozenSonic Mini, Sonic Mini 4K505353.2 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 7AA8DC8EE95FE1BC5956D8DD49056BA8 | |||
| BlueCast | Original | castable | 50 | 6 | 45 | 4.2 | [5] | BlueCastOriginalPhrozenSonic Mini, Sonic Mini 4K506454.2 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id EA36C0EDBF9D1410AA95C83A2C85559C | ||
| BlueCast | X-ONE | castable | 35 | 25 | 12 | 6.5 | 7 | [5] | BlueCastX-ONEPhrozenSonic Mini, Sonic Mini 4K3525126.57 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id C368E9DC32B4B947FA3CF17B7AD54B78 | |
| BlueCast | X10 | castable | 50 | 6 | 45 | 2.9 | [5] | BlueCastX10PhrozenSonic Mini, Sonic Mini 4K506452.9 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 626F0D83FF93D36C4CFFF3C9988381CF | ||
| BlueCast | X5 | castable | 50 | 6 | 45 | 3 | [5] | BlueCastX5PhrozenSonic Mini, Sonic Mini 4K506453 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id B56D0C28C151C54E273E8C19423450D0 | ||
| ELEGOO | Standard | black | 50 | 2 | 6 | 25 | 7 | [4] | ELEGOOStandardblackPhrozenSonic Mini, Sonic Mini 4K5026257 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id C9281124919804036E0EC041341ACE0C | |
| ELEGOO | Water Washable | ceramic grey | water washable | 50 | 2 | 6 | 25 | 7 | [4] | ELEGOOWater Washableceramic greyPhrozenSonic Mini, Sonic Mini 4K5026257 You must log in to vote 0 0 There were 0 votes since the poll was created on 13:50, 18 March 2022. poll-id 1140A0C06C47C25A2E1EFA15F7E21E39 |
| eSUN | eResin-PLA | black | 50 | 6 | 6 | 25 | [4] | eSUNeResin-PLAblackPhrozenSonic Mini, Sonic Mini 4K506625 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:01, 7 March 2022. poll-id 27DF14E8596CE4DF9449974586D28387 | ||
| FormFutura | Color Mix Standard | colorable | 50 | 6 | 4 | 45 | [6] | FormFuturaColor Mix StandardPhrozenSonic Mini, Sonic Mini 4K506445 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 9D58F50AB87488C3866CF75CD418FB89 | ||
| FormFutura | Color Mix Water Washable | colorable, water washable | 50 | 11 | 4 | 55 | 1 | [6] | FormFuturaColor Mix Water WashablePhrozenSonic Mini, Sonic Mini 4K50114551 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 597E2BB9107A6F26B0713CE0453A1505 | |
| FormFutura | Flex 82A | flexible | 50 | 7 | 4 | 35 | 1 | [6] | FormFuturaFlex 82APhrozenSonic Mini, Sonic Mini 4K5074351 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id F1F1A6EE9024E5C697E754F523B5CD12 | |
| FormFutura | Impact 71D | 50 | 7 | 4 | 45 | [6] | FormFuturaImpact 71DPhrozenSonic Mini, Sonic Mini 4K507445 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 80221DA2A299F6359611EF2647E35421 | |||
| FormFutura | Rigid Ceramic | 50 | 7 | 2 | 70 | [6] | FormFuturaRigid CeramicPhrozenSonic Mini, Sonic Mini 4K507270 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id CDB22997C667C1F291C68813461FC5A5 | |||
| iFUN | High Clear | transparent | high temp | 50 | 7 | 6 | 25 | 7 | [4] | iFUNHigh CleartransparentPhrozenSonic Mini, Sonic Mini 4K5076257 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id 3CA93322C5315DC2C8F9F639C6B2CB0C |
| Liqcreate | Clear Impact | clear | 50 | 11 | 1 | 85 | [7] | LiqcreateClear ImpactclearPhrozenSonic Mini, Sonic Mini 4K5011185 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 7A826A78DB5FE8F353DC332F6713E845 | ||
| Liqcreate | Composite-X | 50 | 8 | 1 | 75 | [7] | LiqcreateComposite-XPhrozenSonic Mini, Sonic Mini 4K508175 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id D25F310318DD35F36C01D2FF5F5D4AAA | |||
| Liqcreate | Deep Blue | blue | 50 | 11 | 1 | 40 | [7] | LiqcreateDeep BluebluePhrozenSonic Mini, Sonic Mini 4K5011140 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 21CB5E8BFF604666A7816680B81038D1 | ||
| Liqcreate | Dental Model Pro | beige | dental | 50 | 5.5 | 1 | 75 | [7] | LiqcreateDental Model ProbeigePhrozenSonic Mini, Sonic Mini 4K505.5175 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id E0D251D7958F96F2A197E5C04EA2D8C9 | |
| Liqcreate | Dental Model Pro | grey | dental | 50 | 6 | 1 | 75 | [7] | LiqcreateDental Model ProgreyPhrozenSonic Mini, Sonic Mini 4K506175 You must log in to vote 0 0 There were 0 votes since the poll was created on 10:48, 14 March 2022. poll-id 46D979ADB000EEA9FC83EB128B1589FC | |
| Liqcreate | Flexible-X | flexible | 50 | 18 | 1 | 85 | [7] | LiqcreateFlexible-XPhrozenSonic Mini, Sonic Mini 4K5018185 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 51BCFF09407AA6ABD43AAEFC8ACE32EA | ||
| Liqcreate | Gingiva Mask | dental | 100 | 14 | 1 | 75 | [7] | LiqcreateGingiva MaskPhrozenSonic Mini, Sonic Mini 4K10014175 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id AB3982714EC6659E505EA7237F86A11E | ||
| Liqcreate | Hazard Glow | glow in the dark | 100 | 16 | 1 | 75 | [7] | LiqcreateHazard GlowPhrozenSonic Mini, Sonic Mini 4K10016175 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 10C41CB2648C9A8302D5C7D4C4923B73 | ||
| Liqcreate | Premium Black | black | 50 | 3.5 | 1 | 60 | [7] | LiqcreatePremium BlackblackPhrozenSonic Mini, Sonic Mini 4K503.5160 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:13, 14 March 2022. poll-id 93A98A557A146F20C05E3A1D41F2A540 | ||
| Liqcreate | Premium Flex | flexible | 50 | 4 | 1 | 75 | [7] | LiqcreatePremium FlexPhrozenSonic Mini, Sonic Mini 4K504175 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 29F7324AAB5FB9B9F493E9100A538A69 | ||
| Liqcreate | Premium Model | 50 | 6 | 1 | 40 | [7] | LiqcreatePremium ModelPhrozenSonic Mini, Sonic Mini 4K506140 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 7A83B8171E9BDB5B79B176B05AC6E0EF | |||
| Liqcreate | Premium Tough | 50 | 5.5 | 1 | 75 | [7] | LiqcreatePremium ToughPhrozenSonic Mini, Sonic Mini 4K505.5175 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 07A37457E9E6B0EA492D1ED01FFA0482 | |||
| Liqcreate | Premium White | white | 50 | 6 | 1 | 85 | 2 | [7] | LiqcreatePremium WhitewhitePhrozenSonic Mini, Sonic Mini 4K5061852 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:13, 14 March 2022. poll-id F38393E88CD1DA6CE4BBDF1253413709 | |
| Liqcreate | Stone Coal Black | black | 50 | 11 | 1 | 40 | [7] | LiqcreateStone Coal BlackblackPhrozenSonic Mini, Sonic Mini 4K5011140 You must log in to vote 0 0 There were 0 votes since the poll was created on 15:13, 14 March 2022. poll-id A665C1B8F20A68F9B71960F129CC9144 | ||
| Liqcreate | Strong-X | 50 | 11 | 1 | 85 | [7] | LiqcreateStrong-XPhrozenSonic Mini, Sonic Mini 4K5011185 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id E94489E0A23D2B9EB0802B7442A41F90 | |||
| Liqcreate | Tough-X | 50 | 18 | 1 | 75 | [7] | LiqcreateTough-XPhrozenSonic Mini, Sonic Mini 4K5018175 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 13B13751BB18678B829B79C276C5CCCB | |||
| Liqcreate | Wax Castable | castable | 50 | 6 | 1 | 75 | [7] | LiqcreateWax CastablePhrozenSonic Mini, Sonic Mini 4K506175 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:01, 13 March 2022. poll-id 1249C88AD0A01C7EC4C57A57F535FDF1 | ||
| Monocure | Flex100 Rapid | flexible | 50 | 5 | 4 | 30 | 1 | [8] | MonocureFlex100 RapidPhrozenSonic Mini, Sonic Mini 4K5054301 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 5B8EB6DF7894DF348A347CB5249A25A4 | |
| Monocure | Model Rapid | 50 | 2.2 | 4 | 30 | 1 | [8] | MonocureModel RapidPhrozenSonic Mini, Sonic Mini 4K502.24301 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 6A18E434A6A491BB0F4AA9EC9F47AA05 | ||
| Monocure | Porcelene Dental (R) | dental | 50 | 2 | 4 | 25 | 1 | [8] | MonocurePorcelene Dental (R)PhrozenSonic Mini, Sonic Mini 4K5024251 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id B116B6091993793A225F2D6C97757BBF | |
| Monocure | Pro Bigvat | large format | 50 | 2 | 4 | 25 | 1 | [8] | MonocurePro BigvatPhrozenSonic Mini, Sonic Mini 4K5024251 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id D025E42FE37BA7A2F46A08F3AE288E23 | |
| Monocure | Pro Crystal Clear | clear | 50 | 2.2 | 4 | 20 | 1 | [8] | MonocurePro Crystal ClearclearPhrozenSonic Mini, Sonic Mini 4K502.24201 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id F3BC759C878B73864F9F1E08D73BB50A | |
| Monocure | Pro Deep Black | black | 50 | 2 | 4 | 25 | 1 | [8] | MonocurePro Deep BlackblackPhrozenSonic Mini, Sonic Mini 4K5024251 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 7EBCD2E76F5C708B7097C28DA80CFE03 | |
| Monocure | Pro Glow In The Dark | glow in the dark | 50 | 2.2 | 4 | 20 | 1 | [8] | MonocurePro Glow In The DarkPhrozenSonic Mini, Sonic Mini 4K502.24201 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id 4991192EF322EF8A902AFDB32CA86403 | |
| Monocure | Tuff Rapid | 50 | 1.8 | 4 | 25 | 1 | [8] | MonocureTuff RapidPhrozenSonic Mini, Sonic Mini 4K501.84251 You must log in to vote 0 0 There were 0 votes since the poll was created on 16:28, 14 March 2022. poll-id D04AC97095B082246C5916C31DAFFB70 | ||
| Phrozen | ABS-Like | grey, white | 50 | 2 | 6 | 25 | 10 | [9][10] | PhrozenABS-Likegrey, whitePhrozenSonic Mini, Sonic Mini 4K50262510 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 40F35D55D4BC9EAC96672AAC3C5D91A2 | |
| Phrozen | Aqua | green, blue, grey 4K, ivory 4K | 50 | 2 | 6 | 25 | 10 | [9][10] | PhrozenAquagreen, blue, grey 4K, ivory 4KPhrozenSonic Mini, Sonic Mini 4K50262510 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id CB710F44C463B802E6DD2A89D5A8AE6B | |
| Phrozen | Aqua | grey 8K | 50 | 2 | 6 | 30 | 13 | [9][10] | PhrozenAquagrey 8KPhrozenSonic Mini, Sonic Mini 4K50263013 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 4E43E8D47D14F9F18D016EB02F24E694 | |
| Phrozen | Basic | beige | 50 | 3 | 6 | 25 | 13 | [9][10] | PhrozenBasicbeigePhrozenSonic Mini, Sonic Mini 4K50362513 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id BEC7A22373C9AC5D5796B72F88611861 | |
| Phrozen | Flex | beige | flexible | 50 | 3 | 6 | 25 | 15 | [9][10] | PhrozenFlexbeigePhrozenSonic Mini, Sonic Mini 4K50362515 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 07ABA2E3DBFE80923B03B4B153DEA93F |
| Phrozen | Low-Irritation | beige | 50 | 5 | 6 | 25 | 15 | [9][10] | PhrozenLow-IrritationbeigePhrozenSonic Mini, Sonic Mini 4K50562515 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 9F5440DDBD93915F151BFA48A77CE6B3 | |
| Phrozen | Mud-Like | coral | 50 | 5 | 6 | 40 | 14 | [9][10] | PhrozenMud-LikecoralPhrozenSonic Mini, Sonic Mini 4K50564014 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 3292B1C7760C033AFFD8E2E8A5ECEBBB | |
| Phrozen | Nylon Tough | translucent green | 50 | 3 | 6 | 25 | 13 | [9][10] | PhrozenNylon Toughtranslucent greenPhrozenSonic Mini, Sonic Mini 4K50362513 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id A518085507E5686F51C1A22B24AE8681 | |
| Phrozen | ONYX Rigid Pro 410 | black | 50 | 7 | 6 | 35 | 15 | [9][10] | PhrozenONYX Rigid Pro 410blackPhrozenSonic Mini, Sonic Mini 4K50763515 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 8BFDA28BFA92F106385216EC601FD1DA | |
| Phrozen | Rock Stiff | black | 50 | 3 | 6 | 25 | 11 | [9][10] | PhrozenRock StiffblackPhrozenSonic Mini, Sonic Mini 4K50362511 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id A8DE75356796E473D8AE1A0703BC5C7A | |
| Phrozen | SC-801 | clear | 50 | 5 | 6 | 25 | 11 | [9][10] | PhrozenSC-801clearPhrozenSonic Mini, Sonic Mini 4K50562511 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 9912762C7ED0496FC9636D6D82C7ABDE | |
| Phrozen | TR250 | deep grey | high temp | 50 | 4 | 6 | 25 | 15 | [9][10] | PhrozenTR250deep greyPhrozenSonic Mini, Sonic Mini 4K50462515 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id DCEF49382BA18A5197464798D3E39DB4 |
| Phrozen | TR250LV | grey | high temp | 50 | 2 | 6 | 25 | 11 | [9][10] | PhrozenTR250LVgreyPhrozenSonic Mini, Sonic Mini 4K50262511 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 79347FDEEE52531A16D3C9D25ADFD4F4 |
| Phrozen | TR300 Ultra-High Temp | grey | high temp | 50 | 2 | 6 | 15 | 10 | [9][10] | PhrozenTR300 Ultra-High TempgreyPhrozenSonic Mini, Sonic Mini 4K50261510 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 52ED1A98970BB5FDDCCE533020D3B0F0 |
| Phrozen | Water-Washable | black, grey | water washable | 50 | 2 | 6 | 25 | 10 | [9][10] | PhrozenWater-Washableblack, greyPhrozenSonic Mini, Sonic Mini 4K50262510 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:45, 20 March 2022. poll-id C73397355C9D9AC16DDC227122170A5D |
| Phrozen | Water-Washable Dental Model | beige | water washable, dental | 50 | 6 | 6 | 30 | 12 | [9][10] | PhrozenWater-Washable Dental ModelbeigePhrozenSonic Mini, Sonic Mini 4K50663012 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 7ADB1BD46C8E8096A145656672E81DC2 |
| Phrozen | Wax-Like | green | castable | 50 | 4 | 6 | 25 | 14 | [9][10] | PhrozenWax-LikegreenPhrozenSonic Mini, Sonic Mini 4K50462514 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id B96C4871DDEAC8FF93CF3930DBFC4FA2 |
| Phrozen | Wax-Like | violet | castable | 50 | 6 | 6 | 25 | 15 | [9][10] | PhrozenWax-LikevioletPhrozenSonic Mini, Sonic Mini 4K50662515 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:18, 8 March 2022. poll-id 49031587F457DCAD50132E362F29717B |
| Power Resins | Burn | castable, dental | 50 | 4 | 6 | 50 | [11] | Power ResinsBurnPhrozenSonic Mini, Sonic Mini 4K504650 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 280888FA8B5FBD0591702B9BA120147B | ||
| Power Resins | Dark | castable | 50 | 7 | 12 | 75 | [11] | Power ResinsDarkPhrozenSonic Mini, Sonic Mini 4K5071275 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 5A64EDE2039F1A17CC4CA079176B4FEA | ||
| Power Resins | Model | castable, dental | 50 | 7 | 12 | 75 | [11] | Power ResinsModelPhrozenSonic Mini, Sonic Mini 4K5071275 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id C28FDDEB4CC3ACC4B7A60C991706CAAE | ||
| Power Resins | Opaque | castable | 50 | 4 | 6 | 50 | [11] | Power ResinsOpaquePhrozenSonic Mini, Sonic Mini 4K504650 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id DFDB72B208BC56796A26E01E35C080AD | ||
| Power Resins | Temp | castable, dental | 50 | 7 | 12 | 75 | [11] | Power ResinsTempPhrozenSonic Mini, Sonic Mini 4K5071275 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id 37232A8AE89528FA0699E9E67FC3534E | ||
| Power Resins | Wax | castable | 50 | 3 | 6 | 40 | [11] | Power ResinsWaxPhrozenSonic Mini, Sonic Mini 4K503640 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:26, 15 March 2022. poll-id BE6DD8C3FCFB2A9CE309CEADE7AD93B2 | ||
| Resione | C01 | 50 | 4.5 | 3 | 50 | 9 | [12] | ResioneC01PhrozenSonic Mini, Sonic Mini 4K504.53509 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 467BF0593DC51C456FB2E77794C55D4C | ||
| Resione | D01 | 50 | 3.9 | 3 | 55 | 9 | [12] | ResioneD01PhrozenSonic Mini, Sonic Mini 4K503.93559 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 7C7B9F12C1429C421926EED2583B3CB8 | ||
| Resione | D01S | 50 | 4.2 | 3 | 50 | 9 | [12] | ResioneD01SPhrozenSonic Mini, Sonic Mini 4K504.23509 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 6EFD822636C401EDA2038FD86054AC64 | ||
| Resione | F39-F39T | 100 | 3 | 3 | 40 | 10 | [12] | ResioneF39-F39TPhrozenSonic Mini, Sonic Mini 4K100334010 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 95C279EF6C8DAB283DB0BFB86B0530D9 | ||
| Resione | F69-F80 Black | 50 | 3.6 | 3 | 45 | 10 | [12] | ResioneF69-F80 BlackPhrozenSonic Mini, Sonic Mini 4K503.634510 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 449BE8D1D30C856791E931F3C3BE711B | ||
| Resione | F80 Gum | 50 | 3 | 3 | 40 | 10 | [12] | ResioneF80 GumPhrozenSonic Mini, Sonic Mini 4K50334010 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 739BE26E070F915683C08CA02A90C027 | ||
| Resione | G217-HT100 | 50 | 4.2 | 3 | 50 | 10 | [12] | ResioneG217-HT100PhrozenSonic Mini, Sonic Mini 4K504.235010 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 103750CC38CCCCE75740856A0E66109B | ||
| Resione | K | 50 | 3 | 3 | 40 | 9 | [12] | ResioneKPhrozenSonic Mini, Sonic Mini 4K5033409 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 37A639F79DE463620E68F0DCD726F388 | ||
| Resione | M58 | 50 | 2.6 | 3 | 40 | 9 | [12] | ResioneM58PhrozenSonic Mini, Sonic Mini 4K502.63409 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 095FB5C4EA7EF254F09CF83C031ABF22 | ||
| Resione | M68-EC51 | 50 | 2.5 | 3 | 40 | 9 | [12] | ResioneM68-EC51PhrozenSonic Mini, Sonic Mini 4K502.53409 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 523B618F41370657D04ABB38EFA198AC | ||
| Resione | M70 | 50 | 3.6 | 3 | 60 | 10 | [12] | ResioneM70PhrozenSonic Mini, Sonic Mini 4K503.636010 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 2EFA92417EFBBE24061CB4EBA0F528F8 | ||
| Resione | MS100 | 50 | 3.3 | 3 | 40 | 9 | [12] | ResioneMS100PhrozenSonic Mini, Sonic Mini 4K503.33409 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 1D677AD6AF7B54A7DB13F7264B60EF12 | ||
| Resione | PB81 | 50 | 3.3 | 3 | 30 | 9 | [12] | ResionePB81PhrozenSonic Mini, Sonic Mini 4K503.33309 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 95681C20AD948045B7AD2E9082D12057 | ||
| Resione | W90B | clear, white, blue | 50 | 2.2 | 3 | 30 | 9 | [12] | ResioneW90Bclear, white, bluePhrozenSonic Mini, Sonic Mini 4K502.23309 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id 8AA180A61642AB252856C34632CAE3DF | |
| Resione | W90B | orange, grey, black | 50 | 2.3 | 3 | 35 | 9 | [12] | ResioneW90Borange, grey, blackPhrozenSonic Mini, Sonic Mini 4K502.33359 You must log in to vote 0 0 There were 0 votes since the poll was created on 18:54, 15 March 2022. poll-id BC5001BB9C98637780B182BAF3C9DABA | |
| Siraya Tech | Blu | emerald blue, clear v2 | 50 | 4 | 5 | 35 | [13] | Siraya TechBluemerald blue, clear v2PhrozenSonic Mini, Sonic Mini 4K504535 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id DA96462FCF0E96C21FBEC8C8D5C119FB | ||
| Siraya Tech | Blu | obsidian black | 50 | 3 | 5 | 30 | [13] | Siraya TechBluobsidian blackPhrozenSonic Mini, Sonic Mini 4K503530 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 29A548BD295CAB2E4039AC18B30B8569 | ||
| Siraya Tech | Cast | castable | 50 | 4.4 | 5 | 40 | [13] | Siraya TechCastPhrozenSonic Mini, Sonic Mini 4K504.4540 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 9AD4F7BC3B384573A4D5E239B9510996 | ||
| Siraya Tech | Fast | navy grey | 50 | 3 | 5 | 45 | [13] | Siraya TechFastnavy greyPhrozenSonic Mini, Sonic Mini 4K503545 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 2D439AEEE7A375B4F50869656719B546 | ||
| Siraya Tech | Fast | 50 | 2.5 | 5 | 35 | [13] | Siraya TechFastPhrozenSonic Mini, Sonic Mini 4K502.5535 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:56, 29 March 2022. poll-id 5BE91246F925A94F75943D2FE0D7170A | |||
| Ministry of Resin | Durable | grey | 50 | 3.75 | 6 | 35 | 10 | [14] | Ministry of ResinDurablegreyPhrozenSonic Mini, Sonic Mini 4K503.7563510 You must log in to vote 0 0 There were 0 votes since the poll was created on 14:04, 23 May 2022. poll-id B8DB45ABE7F6799C794701706BB3BF63 |
How to use the spreadsheet (Step-by-step)
1. Find the resin you'd like to use
You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes.
If you are looking for a specific resin, but cannot find it here, try the Master MSLA printer settings spreadsheet. You might find its settings for another printer, which should still be helpful.
2. Check the source
The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations.
3. Copy the parameters into your slicer
The names of the settings might be different depending on which slicer you use (eg. Chitubox, Lychee, PrusaSlicer etc.)
Some settings such as support density are not included in the table, as they are heavily dependent on the 3D model.
4. Print a test file for validation
This is a crucial step, and one you shouldn't skip. Every printer is slightly different, and the settings that work on one unit might not work the same on another.
As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.
You should always start out with a small test file to check if the settings work before launching a larger print.
5. Inspect the test file
If the print looks good, you can go ahead and use the settings as they are.
If you see any imperfections, (such as lack of detail, brittleness, discoloration etc.) adjust the settings according to the resin validation guide.
6. Help out others
If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.)
If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters.
You can help even more by adding other compatible resins with the Add new settings button.
Other important factors
There are some factors that greatly influence your printing success no matter what material you choose.
1. Maintain adequate temperature
You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster.
The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.
2. Shake your resin
Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.
You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom.
3. Check your expiration date
Keep away from direct sunlight. Store in a cool, dry place. Do not exceed expiration date. Use soon after opening.
What's true for most of your food cupboard is true for resins as well.
While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.
Resin settings explained
If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean.
These 3D printers by Phrozen use an open material system. This means they can use any brand of resin, not just the ones sold by Phrozen.
Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems.
For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are:
- Layer height: The settings provided will work at this layer height. If you would like to print at a lower or higher height, you will need to adjust the settings accordingly.
- μm: 1 micron or 0.001 milimeters.
- Normal exposure time: The amount of time each normal layer will be cured for.
- Number of base layers: At the start of the print, you must cure a few layers for a longer time. This helps the model stick to the build plate.
- Base layer exposure time: The amount of time each base layer will be cured for.
- Light off delay: The amount of time the curing light will be off for between each layer. This helps resin spread out evenly after the build plate moves up, and helps cool down the LCD screen.
Community tips
If you have a tip related to Phrozen Sonic Mini & Mini 4K resin settings, tell others about it below.
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 "#3DRS Resin Settings & Support". 3D Resin Solutions.
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 "3D Printing Resins for LCD, DLP". 3DMaterials.
- ↑ 3.0 3.1 3.2 3.3 "3D Printing Settings". AmeraLabs.
- ↑ 4.0 4.1 4.2 4.3 4.4 "Phrozen Sonic Mini 3D Resin Settings". PCBurn.
- ↑ 5.0 5.1 5.2 5.3 5.4 5.5 5.6 "Download". BlueCast.
- ↑ 6.0 6.1 6.2 6.3 6.4 "3D Printer resin". FormFutura.
- ↑ 7.00 7.01 7.02 7.03 7.04 7.05 7.06 7.07 7.08 7.09 7.10 7.11 7.12 7.13 7.14 7.15 7.16 "Compatible 3D-printers with Liqcreate resins". Liqcreate.
- ↑ 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 "Printer Settings". Monocure 3D.
- ↑ 9.00 9.01 9.02 9.03 9.04 9.05 9.06 9.07 9.08 9.09 9.10 9.11 9.12 9.13 9.14 9.15 9.16 9.17 "Phrozen Resin Profile". Google Sheets.
- ↑ 10.00 10.01 10.02 10.03 10.04 10.05 10.06 10.07 10.08 10.09 10.10 10.11 10.12 10.13 10.14 10.15 10.16 10.17 "Resin Profile – Phrozen Technology". Phrozen3D.com.
- ↑ 11.0 11.1 11.2 11.3 11.4 11.5 "Printer Settings". powerresins.
- ↑ 12.00 12.01 12.02 12.03 12.04 12.05 12.06 12.07 12.08 12.09 12.10 12.11 12.12 12.13 12.14 "Settings". RESIONE.
- ↑ 13.0 13.1 13.2 13.3 13.4 "support". Siraya Tech.
- ↑ "koeylondon". Maker Trainer.
Enable comment auto-refresher