Creality LD-002H resin settings matrix
From Maker Trainer, the online makerspace
| Brand | Product | Color | Special property | At layer height (μm) | Exposure time (s) | Number of bottom layers | Bottom layers exposure time (s) | Light off time (s) | Source |
|---|---|---|---|---|---|---|---|---|---|
| Brand | Type | color | Property | Layer-height | normal EXP | bottom layers | bottom EXP | Light-Off | [1] |
| 3D Fila | Standard | White | 50 | 2.0 | 8 | 12 | 0 | [1] | |
| Anycubic | Standard | Black | 50 | 2.0 | 4 | 12 | 0 | [1] | |
| Anycubic | Standard | Blue | 50 | 2.0 | 6 | 12 | 0 | [1] | |
| Anycubic | Standard | Grey | 50 | 1.7 | 6 | 12 | 0 | [1] | |
| Anycubic | Standard | Clear | 50 | 1.5 | 8 | 10 | 0 | [1] | |
| Anycubic | Standard | Translucent Green | 50 | 1.5 | 6 | 10 | 0 | [1] | |
| Anycubic | Plant-based | Translucent Green | 50 | 1.8 | 8 | 12 | 0 | [1] | |
| Dragon | Standard | Translucent Amber | 50 | 3.0 | 8 | 20 | 8 | [1] | |
| ELEGOO | Standard | Grey | 50 | 2 | 8 | 12 | 0 | [1] | |
| ELEGOO | Standard | Black | 50 | 1.5 | 4 | 12 | 8.5 | [1] | |
| ELEGOO | Standard | Translucent Green | 50 | 2.0 | 8 | 12 | [1] | ||
| ELEGOO | ABS-Like | White | 50 | 1.0 | 4 | 10 | 0 | [1] | |
| ELEGOO | ABS-Like | Grey | 50 | 1.2 | 4 | 10 | 9 | [1] | |
| ELEGOO | ABS-Like | Translucent Red | 50 | 1.1 | 6 | 15 | 0 | [1] | |
| ELEGOO | ABS-Like | Translucent Green | 50 | 1.5 | 6 | 10 | 13 | [1] | |
| ELEGOO | Water Washable | White | water washable | 50 | 1.2 | 4 | 6 | 0 | [1] |
| ELEGOO | Water Washable | Grey | water washable | 50 | 2.5 | 4 | 12 | 0 | [1] |
| ELEGOO | Water Washable | Translucent Blue | water washable | 50 | 1.6 | 4 | 8 | 0 | [1] |
| ELEGOO | Water Washable | Translucent Red | water washable | 50 | 1.7 | 4 | 8 | 0 | [1] |
| EPAX | Hard and Tough | Grey | 50 | 2.3 | 5 | 10.5 | 15 | [1] | |
| Eryone | Standard | Grey | 50 | 3.0 | 5 | 12 | 0 | [1] | |
| eSUN | Standard | Black | 30 | 2.0 | 6 | 16 | 0 | [1] | |
| eSUN | Water Washable | Black | water washable | 50 | 1.8 | 8 | 10 | 0 | [1] |
| iFUN | Toughness | White | 50 | 1.9 | 5 | 12.5 | 14 | [1] | |
| iFUN | Toughness | Grey | 50 | 2.5 | 5 | 12.5 | 13 | [1] | |
| Inland | Water Washable | Black | water washable | 40 | 2.0 | 8 | 12 | 0 | [1] |
| Nova3D | Standard | Grey | 50 | 1.7 | 5 | 12 | 14 | [1] | |
| Nova3D | Standard | Clear | 50 | 1.3 | 5 | 12 | 11 | [1] | |
| Nova3D | Castable | Red | castable | 25 | 1.2 | 7 | 13 | 0 | [1] |
| Nova3D | Water Washable | Black | water washable | 50 | 1.6 | 7 | 15 | 0 | [1] |
| Phrozen | ABS-like | Grey | 30 | 1.8 | 8 | 12 | 0 | [1] | |
| Resione | Heat-Resistant | Translucent Yellow | high temp | 50 | 2.5 | 4 | 20 | 13 | [1] |
| Rich-Opto | Standard | Translucent Purple | 40 | 1.5 | 4 | 10 | 0 | [1] | |
| Rich-Opto | High-Tensile | Translucent Green | 50 | 2.0 | 4 | 10 | 0 | [1] | |
| Rich-Opto | Water Washable | Clear | water washable | 40 | 1.5 | 4 | 10 | 0 | [1] |
| Shine Sing | Standard | White | 30 | 1.2 | 6 | 10 | 0 | [1] | |
| Shine Sing | Standard | Clear | 30 | 2.3 | 6 | 9 | 7 | [1] | |
| Shine Sing | Tough | Purple | 50 | 1.3 | 6 | 12 | 0 | [1] | |
| Siraya Tech | Standard | Blue | 50 | 2.2 | 6 | 15 | 0 | [1] | |
| Siraya Tech | Rapid | Grey | 30 | 1.3 | 4 | 8 | 0 | [1] | |
| Siraya Tech | Rapid | White | 50 | 1.7 | 4 | 20 | 0 | [1] | |
| Siraya Tech | Blu | Translucent Blue | 50 | 3.0 | 3 | 12 | 0 | [1] | |
| WEISTEK | Standard | White | 50 | 1.0 | 8 | 10 | 9 | [1] | |
| WEISTEK | Standard | Clear | 50 | 1.3 | 6 | 10 | 10 | [1] |
- ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.30 1.31 1.32 1.33 1.34 1.35 1.36 1.37 1.38 1.39 1.40 1.41 1.42 1.43 1.44 "BEST RESIN SETTINGS for Creality LD-002R / -002H / -001 / -003 / -006". Google Sheets.
