ELEGOO Saturn resin settings matrix
From Maker Trainer, the online makerspace
| Brand | Product | Color | Special property | At layer height (μm) | Exposure time (s) | Number of bottom layers | Bottom layers exposure time (s) | Light off time (s) | Source |
|---|---|---|---|---|---|---|---|---|---|
| ELEGOO | Standard | Grey, White, Red, Green, Clear Blue, Blue, Yellow, Beige | 50 | 2.5 | 30 | [1][2] | |||
| ELEGOO | Standard | Black, Maroon | 50 | 3.5 | 35 | [1][2] | |||
| ELEGOO | Standard | Translucent | 50 | 6 | 40 | [1][2] | |||
| ELEGOO | ABS-Like | Grey, White, Red, Green, Blue, Yellow, Beige, Mint Green, Smoky Black, Maroon | 50 | 2.5 | 30 | [1][2] | |||
| ELEGOO | ABS-Like | Black | 50 | 3.5 | 35 | [1][2] | |||
| ELEGOO | ABS-Like | Translucent | 50 | 6 | 40 | [1][2] | |||
| ELEGOO | Water Washable | Ceramic Grey, White, Red, Green, Clear Blue, Yellow, Beige, Mint Green, Smoky Black | water washable | 50 | 2.5 | 30 | [1][2] | ||
| ELEGOO | Water Washable | Black | water washable | 50 | 3.5 | 35 | [1][2] | ||
| ELEGOO | Plant-based | Grey, White, Green | 50 | 2.5 | 30 | [1][2] | |||
| ELEGOO | Plant-based | Black, Translucent | 50 | 3.5 | 35 | [1][2] | |||
| 3DJake | Color Mix | Transparent Black | colorable | 50 | 4.5 | 20 | [3][2] | ||
| Anycubic | Basic | Black | 50 | 2.75 | 35 | [3][2] | |||
| Anycubic | Basic | Translucent Yellow | 50 | 2 | 30 | [3][2] | |||
| Anycubic | Basic | Grey | 50 | 2 | 45 | [3][2] | |||
| Anycubic | Basic | Translucent Green | 50 | 3 | 20 | [3][2] | |||
| Anycubic | Plant-based | Black | 50 | 3.5 | 30 | [3][2] | |||
| eSUN | Water Washable | White | water washable | 50 | 2.5 | 30 | [3][2] | ||
| Monocure | Rapid | White | 50 | 3 | 40 | [3][2] | |||
| Monocure | Rapid | Skin | 50 | 3 | 40 | [3][2] | |||
| SHINE SING | Standard | Grey | 50 | 2.7 | 22 | [3][2] | |||
| Siraya Tech | Fast | Grey | 50 | 2 | 30 | [3][2] | |||
| Siraya Tech | Blu Clear V2 | Clear | 50 | 3.3 | 20 | [3][2] | |||
| SUNLU | Standard | Grey | 50 | 3 | 15 | [3][2] | |||
| SUNLU | Rapid | Grey | 40 | 2.8 | 12 | [3][2] |
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 "ELEGOO resin settings on mars & mars pro & Mars 2 & Mars 3 and saturn(official)". Google Sheets.
- ↑ 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 2.22 2.23 "ELEGOO Printers Resin Setting Sheet". ELEGOO.com.
- ↑ 3.00 3.01 3.02 3.03 3.04 3.05 3.06 3.07 3.08 3.09 3.10 3.11 3.12 3.13 "Unofficial Elegoo Saturn resin setting". Google Sheets.
