Difference between revisions of "Siraya Tech resin settings matrix"

From Maker Trainer, the online makerspace
Tag: 2017 source edit
Tag: 2017 source edit
 
Line 2,787: Line 2,787:
|Anycubic
|Anycubic
|Photon Mono SE
|Photon Mono SE
|100
|50
|2.5
|2.5
|4
|4

Latest revision as of 13:38, 29 June 2022

Add new settings Suggest a change
Suggest a change form
You can email us at admin@makertrainer.com.
Resin settings submission form
You can also email us at admin@makertrainer.com.
  1. 1.000 1.001 1.002 1.003 1.004 1.005 1.006 1.007 1.008 1.009 1.010 1.011 1.012 1.013 1.014 1.015 1.016 1.017 1.018 1.019 1.020 1.021 1.022 1.023 1.024 1.025 1.026 1.027 1.028 1.029 1.030 1.031 1.032 1.033 1.034 1.035 1.036 1.037 1.038 1.039 1.040 1.041 1.042 1.043 1.044 1.045 1.046 1.047 1.048 1.049 1.050 1.051 1.052 1.053 1.054 1.055 1.056 1.057 1.058 1.059 1.060 1.061 1.062 1.063 1.064 1.065 1.066 1.067 1.068 1.069 1.070 1.071 1.072 1.073 1.074 1.075 1.076 1.077 1.078 1.079 1.080 1.081 1.082 1.083 1.084 1.085 1.086 1.087 1.088 1.089 1.090 1.091 1.092 1.093 1.094 1.095 1.096 1.097 1.098 1.099 1.100 1.101 1.102 1.103 1.104 1.105 1.106 1.107 1.108 1.109 1.110 1.111 1.112 1.113 1.114 1.115 1.116 1.117 1.118 1.119 1.120 1.121 1.122 1.123 1.124 "support". Siraya Tech.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 "Prusa SL1 Resin Settings". Google Sheets.
  3. 3.0 3.1 3.2 3.3 3.4 3.5 "Prusa Community Forum - Official Prusa SL1 Group". Facebook.
  4. 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 "Photon Mono X Resin Settings Log". Google Sheets.
  5. 5.0 5.1 "LD-002H Resin Print Settings". Google Sheets.
  6. 6.0 6.1 6.2 6.3 "BEST RESIN SETTINGS for Creality LD-002R / -002H / -001 / -003 / -006". Google Sheets.
  7. 7.0 7.1 "Unofficial Elegoo Saturn resin setting". Google Sheets.
  8. 8.0 8.1 8.2 8.3 8.4 8.5 8.6 "ELEGOO Printers Resin Setting Sheet". ELEGOO.com.
  9. 9.0 9.1 9.2 9.3 9.4 "Community Resin Settings (ELEGOO)". Google Sheets.
  10. 10.0 10.1 10.2 "Phenom - Resin Exposure". Google Sheets.
  11. 11.0 11.1 11.2 "Phenom - Resin selection". Google Docs.
  12. 12.0 12.1 12.2 "Support – Peopoly". Peopoly.net.
  13. "EPAX Printers Recommended Exposure Settings for Different Resins". Google Sheets.
  14. 14.0 14.1 "Anycubic Photon Mono SE". Google Sheets.
  15. 15.0 15.1 15.2 15.3 "Anycubic Photon Resin Settings". Google Sheets.
  16. 16.0 16.1 16.2 16.3 "The Resin Printing Resource Guide - Beginners, start here! : AnycubicPhoton". Reddit.
  17. 17.0 17.1 17.2 17.3 17.4 17.5 "3D Resin Printer Exposure Settings". 4D Filtration.
  18. "Tested resins". Prusa Knowledge Base.
  19. "Anycubic Photon Mono - Resin Settings". Google Sheets.
  20. "FormFunction3D". Maker Trainer.
  21. "Hanage". Maker Trainer.
  22. "Gibbo". Maker Trainer.
  23. "devinb86". Maker Trainer.