Difference between revisions of "ELEGOO Saturn resin settings matrix"
From Maker Trainer, the online makerspace
m (added Category:Resin printer settings matrixes using HotCat) |
|||
| Line 121: | Line 121: | ||
|<ref name=":0" /><ref name=":1" /> | |<ref name=":0" /><ref name=":1" /> | ||
|} | |} | ||
[[Category:Resin printer settings matrixes]] | |||
Revision as of 15:17, 1 January 2022
| Brand | Product | Color | Special property | At layer height (μm) | Exposure time (s) | Number of bottom layers | Bottom layers exposure time (s) | Light off time (s) | Source |
|---|---|---|---|---|---|---|---|---|---|
| ELEGOO | Standard | Grey, White, Red, Green, Clear Blue, Blue, Yellow, Beige | 50 | 2.5 | 30 | [1][2] | |||
| ELEGOO | Standard | Black, Maroon | 50 | 3.5 | 35 | [1][2] | |||
| ELEGOO | Standard | Translucent | 50 | 6 | 40 | [1][2] | |||
| ELEGOO | ABS-Like | Grey, White, Red, Green, Blue, Yellow, Beige, Mint Green, Smoky Black, Maroon | 50 | 2.5 | 30 | [1][2] | |||
| ELEGOO | ABS-Like | Black | 50 | 3.5 | 35 | [1][2] | |||
| ELEGOO | ABS-Like | Translucent | 50 | 6 | 40 | [1][2] | |||
| ELEGOO | Water Washable | Ceramic Grey, White, Red, Green, Clear Blue, Yellow, Beige, Mint Green, Smoky Black | water washable | 50 | 2.5 | 30 | [1][2] | ||
| ELEGOO | Water Washable | Black | water washable | 50 | 3.5 | 35 | [1][2] | ||
| ELEGOO | Plant-based | Grey, White, Green | 50 | 2.5 | 30 | [1][2] | |||
| ELEGOO | Plant-based | Black, Translucent | 50 | 3.5 | 35 | [1][2] |
